Résumé du contenu de la page N° 1
HD DIGITAL VIDEOCASSETTE RECORDER
HDW-1800
HDW-D1800
OPERATION MANUAL [English]
1st Edition
Résumé du contenu de la page N° 2
If you have questions on the use of the above Power Cord WARNING / Appliance Connector / Plug, please consult a qualified service personnel. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or CAUTION moisture. These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the To avoid electrical shock, do not open the Operating Instructions unless you
Résumé du contenu de la page N° 3
E1 (residential), E2 (commercial and light industrial), E3 Voor de Klanten in Nederland (urban outdoors), E4 (controlled EMC environment, ex. � Gooi de batterij niet weg maar lever deze in TV studio). als klein chemisch afval (KCA) Attention-when the product is installed in Rack: � Dit apparaat bevat een vast ingebouwde batterij die niet vervangen hoeft te worden 1. Prevention against overloading of branch circuit tijdens de levensduur van het apparaat. When this product is installed in a ra
Résumé du contenu de la page N° 4
Chapter 4 Recording and Playback Table of Contents 4-1 Recording ............................................32 4-1-1 Preparations for Recording ............... 32 4-1-2 Recording Timecode and User Bit Chapter 1 Overview Values................................................ 33 4-1-3 Recording Procedure......................... 35 1-1 Features .................................................6 4-2 Playback ..............................................36 1-2 Example System Configuration....
Résumé du contenu de la page N° 5
Chapter 7 UMID Functions Appendix 7-1 Overview.............................................. 59 Specifications.......................................... 107 7-2 Recording UMIDs................................ 59 About a “Memory Stick”......................... 114 7-3 UMID Output and Display................... 61 7-3-1 UMID Output Settings ...................... 61 Index ....................................................... 116 7-3-2 UMID Display................................... 61 Chapter
Résumé du contenu de la page N° 6
Chapter 1 Overview Overview 1 Chapter High-performance heads and compatibility functions 1-1 Features The newly developed high-performance heads and dynamic tracking (DT) technology provide high-density The HDW-1800/D1800 is a high-definition (HD) digital recording and playback in narrow tracks with high videocassette recorder based on the HDCAM format. reliability. The VTR automatically detects the recording This unit uses large scale integrated circuits for signal format of tapes whe
Résumé du contenu de la page N° 7
Chapter 1 Overview Control panel with LCD Split editing The control panel contains an LCD unit to display various In insert editing, the audio IN and OUT points can be set types of information including time data. The display separately from the video edit points. mode can be changed to show the video which is currently being recorded or played back. Preread editing This allows you to play back prerecorded video and audio Basic operation buttons and jog/shuttle material, edit it by applyi
Résumé du contenu de la page N° 8
Chapter 1 Overview For details on installation, settings, and operations of the HKDW-104 board, refer to the Operation Manual supplied with the board. HDV (i.LINK) input (option) The HKDW-105 i.LINK (HDV) Input Board can be installed in this unit to record i.LINK (HDV) signals from HDV devices onto HDCAM tapes. For details on installation, settings, and operations of the HKDW-105 board, refer to the Operation Manual supplied with the board. Note HDV editing is not supported. 8 1-1 Feat
Résumé du contenu de la page N° 9
Chapter 1 Overview 1-2 Example System Configuration The following conceptual diagram shows an example of use. BVE-series editor Tape control Audio/video server system HDSDI Digital cassette HDW-1800/D1800 HDSDI/Analog composite HDSDI Video monitor HD VTR Analog composite Analog audio SDI Audio monitor SD VTR 1-2 Example System Configuration 9
Résumé du contenu de la page N° 10
Chapter 1 Overview 1-3 Description of the Function Menu in this Manual You can redefine function menu pages and function buttons to configure the function menu of this unit. This manual describes the items related to the function menu as follows, based on the standard factory default settings. Example: Setting F6 (PB/EE) in function menu page P01: HOME This indicates that the PB/EE function is assigned to function selection button F6 in function menu page P01, which is named HOME.
Résumé du contenu de la page N° 11
Chapter 2 Location and Function of Parts Location and Function of 2 Chapter Parts 2-1 Control Panels There are three control panels, as follows: � Upper control panel � Lower control panel � Switch panel Upper control panel (see page 12) HOME 59.94 SDI 10801080 2F ASM CONFI HOME LTC DF VITC LTC EXT-LTC R-RUN PARARUN VIDEO IN PB/EE HD SDI PB 12:34:47:12 COND CONFI PROLL BANK3 REM:20min ENABLE 3+4 2 1 4 EMPH DATA EMPH DATA dB dB EDIT COUNTER 0 0 CTL dB -10 -10 10 E.PRESET -20 -20 -20 ME
Résumé du contenu de la page N° 12
Chapter 2 Location and Function of Parts Note Lower control panel unlock button When closing the lower control panel, be careful not to catch your fingers in the panel. To close the lower control panel Push up the folding levers on both sides at the same time. 2-1-1 Upper Control Panel 1 POWER switch 2 REMOTE buttons and RS-232C indicator 3 EJECT button Cassette compartment Z 4 PHONES jack and control a POWER switch c EJECT button Pressing the “ j ” side of the switch powers the unit on. To
Résumé du contenu de la page N° 13
Chapter 2 Location and Function of Parts 2-1-2 Lower Control Panel HOME 59.94 SDI 10801080 2F ASM CONFI HOME DF VITC LTC EXT-LTC R-RUN PARARUN LTC VIDEO IN PB/EE SDI HD PB 12:34:47:12 COND CONFI PROLL BANK3 REM:20min ENABLE 3+4 2 1 4 EMPH DATA EMPH DATA dB dB EDIT COUNTER 0 0 dB CTL -10 -10 10 E.PRESET -20 -20 -20 MENU -30 -30 -10 -40 -40 -20 -60 -60 -40 CLR CNT TCG SET L 1 R L 2 R L 3 R L 4 R L CUE R SDI1 ANA2 SDI3 AES4 3+4 2 Audio level control knobs 7 Search control section (see page 19)
Résumé du contenu de la page N° 14
Chapter 2 Location and Function of Parts b LCD 1 System information 59.94 SDI 10801080 2F ASM CONFI HOME HOME DF VITC LTC EXT-LTC R-RUN PARARUN LTC VIDEO IN PB/EE HD SDI PB 12:34:47:12 COND CONFI PROLL BANK3 REM:20min ENABLE 3+4 2 1 4 EMPH DATA EMPH DATA dB dB EDIT COUNTER 0 0 CTL dB -10 -10 10 -20 -20 -20 E.PRESET MENU -30 -30 -10 -40 -40 -20 -60 -60 -40 CLR CNT TCG SET L 1 R L 2 R L 3 R L 4 R L CUE R SDI1 ANA2 SDI3 AES4 3+4 2 Function menu information 3 Audio level meter block 1 4 Audio lev
Résumé du contenu de la page N° 15
Chapter 2 Location and Function of Parts � Edit state indication � Name of function menu page The following indications appear when edit preset is This displays the name of the current function menu page. activated. � Function button display area “ASM”: Assemble editing is preset. A total of 10 function buttons are displayed for each “INS”: Insert editing is preset. function menu page: five each on the left and right sides of “ ” (blank): Neither of the above is preset. the LCD. � CONFI/PRE
Résumé du contenu de la page N° 16
Chapter 2 Location and Function of Parts � CUE track input selection Only one input channel number is displayed: The Whether the CUE track input is selected or not is indicated signals from the input channel indicated by the under the CUE track indication (CUE). number are recorded on the track. Only one input channel number is displayed: The Input channel number, +, input channel number are signals from the input channel indicated by the displayed: The signals from the two input channels
Résumé du contenu de la page N° 17
Chapter 2 Location and Function of Parts current level lights. If the audio level is out of the Tape format Abbreviations Color displayable range, the top or bottom segment flashes. D-BETA DB Blue (Dark blue) (HDW- The audio level of an analog track is indicated in the form D1800 only) of a bar graph with 18 segments. A peak program a) CLEAN CL Red (flashing) indication appears for digital tracks in audio indication b) modes other than “FINE”. Other Not displayed Not displayed a) Clean
Résumé du contenu de la page N° 18
Chapter 2 Location and Function of Parts 6 Information relating to timecode “INT-LTC”: The TCG synchronizes with the LTC recorded on a tape. “INT-VITC”: The TCG synchronizes with the VITC recorded on a tape. Time data title “EXT-LTC”: The TCG synchronizes with the external VITC/LTC status LTC input. “SDI-LTC”: The TCG synchronizes with the LTC TCG RUN mode t t 23.98PsF SDTI 1080 1080 PD720P PD720P 2F ASM PREREAD V superimposed on the HDSDI input. DF VITC LTC EXT-LTC R-RUN PARARUN LTC “SD
Résumé du contenu de la page N° 19
Chapter 2 Location and Function of Parts e SHIFT/ENTRY button KEY INHI (inhibit) indicator This button is used to enter an edit point. This indicator lights when the KEY INHI switch on the switch panel (see page 21) is set to “ON”. f ALT(alternative)/DELETE button This button is used to delete an edit point. 4 MULTI CONTROL knob and PUSH/ SHIFT indicator 2 Audio level control knobs In function menu operations, turn the MULTI CONTROL knob to change settings that flash in the menu display 1
Résumé du contenu de la page N° 20
Chapter 2 Location and Function of Parts D R A W R O F VAR If 8 minutes (value can be changed using setup menu item 7 Search control section 501) elapse in standby mode, the unit automatically switches out of standby mode to protect the tape. 1 SHUTTLE button 2 JOG button c STOP button 3 VAR button To stop recording or playback, press this button, turning it on. When you stop playback, the unit switches either to still JOG playback or to E-E mode according to the setting of F6 (PB/EE) i
