Résumé du contenu de la page N° 1
VIDEO CASSETTE PLAYER
MODEL AVP-7200 OPERATING INSTRUCTIONS
Résumé du contenu de la page N° 2
CAUTIONS AND WARNINGS To obtain the best results and to avoid malfunctions, PLEASE READ CAREFULLY THE DESCRIPTIONS AND OPERATING PROCEDURES CONTAINED IN THIS OWNER’S MANUAL PRIOR TO OPERATING THE VIDEO CASSETTE PLAYER. This user manual employs the following symbols to indicate CAUTION different types of warning messages. RISK OF ELECTRIC SHOCKS DO NOT OPEN Indicates a warning or notice regarding product operation. Indicates the presence of important operating and CAUTION: TO REDUCE THE RISK OF
Résumé du contenu de la page N° 3
Note to CATV system installer: When installing this equipment in the home adhere to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. NOTE: This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas
Résumé du contenu de la page N° 4
RECOMMENDED GUIDELINES FOR THE USE OF A VIDEO MONITOR/TV IN A MOTOR VEHICLE • A VIDEO MONITOR/TV is designed for rear passenger viewing only. This product may only be installed in the rear seat compartment of the vehicle, out of the driver’s view. • Installation in any other area of the vehicle within the driver’s view, is illegal in most states, provinces and countries and may lead to driver distraction resulting in an accident, injury and/or death. If you are unsure of regulations, please cons
Résumé du contenu de la page N° 5
TABLE OF CONTENTS NOTE: This Video Cassette Player (VCP) is compatible with any Video Cassette Player bearing the VHS mark. The Video Cassette Player is designed to expand your opportunities for home or mobile viewing and is not intended for any usage which might violate the copyright laws. Save the original shipping carton and packing materials; they will come in handy if you ever have to ship your VCP. For maximum protection, repack the set as it was originally packed at the factory. SAFETY IN
Résumé du contenu de la page N° 6
SAFETY INSTRUCTIONS 1. Read Instructions-All the safety and operating instructions should be read before the Video Cassette Player is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Cautions and Warnings-All cautions and warnings regarding the Video Cassette Player should be adhered to. 4. Follow Instructions-All operating instructions should be followed. 5. Cleaning-Unplug or turn off vehicle power to the Video Cassette Pl
Résumé du contenu de la page N° 7
IMPORTANT SAFEGUARDS MOISTURE CONDENSATION In the normal temperature, if you pour a cold liquid When moving the VCP from a cold place to heated When the moisture condensation occurs inside of into a glass, water vapor in the air will condense place. the VCP, NEVER insert the cassette into the on the surface of the glass. This is moisture cassette compartment. Remove the cassette, if Or the temperature of surroundings goes up due to condensation. The moisture condensation may loaded, by pressing
Résumé du contenu de la page N° 8
SERVICE –If the set has been subjected to excessive shock –When the set exhibits a distinct change in Replacement of parts–When replacement of by being dropped, or the cabinet has been performance, this indicates a need for service. parts is required, be sure the service technician has damaged. used replacement parts specified by the manufacturer that have the same characteristics as Servicing–Do not attempt to service the set the original parts. Unauthorized substitutions may yourself as op
Résumé du contenu de la page N° 9
VIDEO HEAD CLEANING VIDEO HEAD CLOGGING The video heads enable the VCP to read video information pictures from the tape during playback. In the unlikely event that the heads become clogged with dirt video playback will be impossible. This can easily be determined if, during playback of a known good tape, there is good sound, but the picture is extremely snowy. If this is the case, have the video cassette player checked by qualified service personnel. VIDEO HEAD CLEANING NOTES During normal ope
Résumé du contenu de la page N° 10
FEATURES CONGRATULATIONS on your purchase of the Audiovox Model AVP-7200 Video Cassette Player. This unit is designed to satisfy all your VHS tape playback needs and with proper use and care, will offer many years of viewing enjoyment. The features of the Model AVP-7200 Video Cassette Player include: • DIGITAL AUTO TRACKING This VCP plays clear pictures without special operations. In the Auto Tracking Mode, the PLAY indicator blinks. • SELF PICTURE ADJUSTMENT Since HEAD DRUM rotation continuou
Résumé du contenu de la page N° 11
CONTROLS AND INDICATORS FRONT PANEL ! @#$% ^ & * ( ) ! Cassette Compartment # DEW Indicator When power is on, this indicator flashes red to indicate Accepts the VHS tape for playback. excessive moisture buildup inside the VCP. The unit will @ CST-IN Indicator not operate until it dries out sufficiently (the tape can be Lights green when the cassette is inserted. ejected from the unit). When DEW mode has been activated, leave the unit on to allow it to dry out completely. 8
Résumé du contenu de la page N° 12
CONTROLS AND INDICATORS (CONTINUED) $ Power Button * PLAY Button When pressed this button alternately turns the VCP on and Press this key to play back a recorded tape. In the playback off. When power is applied to the unit, the power indicator mode, the playback indicator lights orange, and in Auto lights red. The Power ON and Power OFF mode will be Tracking mode, this indicator will blink. toggled by pressing this key. When the POWER is switched ( Fast Forward/Cue Button on, the power lamp wi
Résumé du contenu de la page N° 13
CONTROLS AND INDICATORS (CONTINUED) REAR PANEL ! 1 Infrared (IR) INPUT Connector (3.5mm jack) # Channel Selection Switch For RF Modulator Set to channel 3 or 4, whichever channel is not active in This connector provides a two-wire interface with various your area. Audiovox IR products such as LCM-4000/5000/5600. $ ANT. IN Connector @ 2 Infrared (IR) INPUT Connector Connect the TV antenna (or cable if available - home use) to This connector provides a two-wire interface with various this conn
Résumé du contenu de la page N° 14
CONTROLS AND INDICATORS (CONTINUED) % AUDIO/VIDEO OUT Connectors These connectors provide an interface to the AUDIO/VIDEO IN connectors of your video monitor, using an RCA cord. ^& DC 12V Jack When using a DC power source, connect this jack to 12V DC. * Connector description for & * RF OUT Connector This connector provides an interface to the antenna input connector terminal of your television using a coaxial cable. Tune the television to channel 3 or 4 to watch video tapes. ( AUDIO/VIDEO IN
Résumé du contenu de la page N° 15
GETTING STARTED VCP TO VEHICLE CONNECTION • Connect the unit to a 12Vdc source only. • The unit should be connected to the vehicle only after verifying the polarity of the cigarette lighter socket. (12Vdc with negative ground) 12
Résumé du contenu de la page N° 16
GETTING STARTED (CONTINUED) 12 VOLT POWER NOTES • This VCP operates on 12Vdc only. If you apply more than 18Vdc, the VCP will automatically turnoff. • If the polarity is reversed, the unit will not operate. • Use of this VCP is not recommended in excessive heat. If the inside temperature of the vehicle is over 100F, do not use the VCP. Allow the VCP to cool before use. 13
Résumé du contenu de la page N° 17
BASIC OPERATION CASSETTE LOADING/UNLOADING LOADING UNLOADING Î Push the cassette into the cassette compartment gently. Î Press the VCP STOP/EJECT button twice (in the PLAYBACK mode). This first press stops the tape, while (Arrow mark at the top) the second press ejects the tape. The CST-IN indicator will turn off. • An inverted cassette cannot be inserted. « The CST-IN indicator lamp lights green. « Pull the cassette out gently. • Upon inserting the cassette, the VCP power turns on and • Wh
Résumé du contenu de la page N° 18
BASIC OPERATION (CONTINUED) ERASURE PROTECTION Video cassettes are equipped with a safety tab to prevent accidental erasure. When the tab is removed, recording can not be performed. • TO PREVENT ACCIDENTAL ERASURE • TO RECORD AGAIN • After recording, break off the safety tab with a • Cover the hole with cellophane tape. screwdriver to avoid accidental re-recording. 15
Résumé du contenu de la page N° 19
BASIC OPERATION (CONTINUED) BASIC PLAYBACK Î
ÿ¯
ö
«
¬
16
Résumé du contenu de la page N° 20
BASIC OPERATION (CONTINUED) Î LOADING « PLAYBACK ÿ STOP Press the PLAY button. Picture will The power is turned on automatically Press the STOP/EJECT button once. appear within approximately 8 seconds. when the cassette is inserted even if The tape will stop. The tape will rewind automatically to the the power switch was off. beginning after the end of the tape is reached and will eject. ¬ FAST FORWARD ö REWIND ¯ EJECT Press the FF button in the STOP mode. Press the REW button in the STOP Press
