Résumé du contenu de la page N° 1
Dynamic Cooking Systems, Inc.
THE PROFESSIONAL EURO HOOD
Use and Installation Guide
Models:
EH-30SS
EH-36SS
Résumé du contenu de la page N° 2
A Message To Our Customers Thank you for selecting this DCS Updraft Euro Hood. Because of its unique features, we have developed this Use and Installation Guide. It contains valuable information on how to properly operate and maintain your new Updraft Euro Hood for years of safe and enjoyable cooking. To help serve you better, please fill out and return the Ownership Registration Card and keep this guide handy, as it will help answer questions that may arise as you use your Updraft Euro Hood. Fo
Résumé du contenu de la page N° 3
T a bl e Of C ontents SAFETY PRACTICES & PRECAUTIONS...............................................................................3 SPECIFICATIONS..................................................................................................................................4 PLANNING THE INSTALLATION..............................................................................................5 INSTALLATION INSTRUCTIONS...........................................................................
Résumé du contenu de la page N° 4
Sa f e ty Practice s & Precaution s This euro hood system is designed to remove smoke, cooking vapors and odors from the cooktop area. WARNING: ALL WALL AND FLOOR OPENINGS WHERE THE EURO HOOD IS INSTALLED MUST BE SEALED. Consult the cooktop or range installation instructions given by the manufacturer before making any cutouts. MOBILE HOME INSTALLATION- The installation of this euro hood must conform to the Manufactured Home Construction and Safety Standards,Title 24 CFR, Part 3280 (formerly Fed
Résumé du contenu de la page N° 5
Sp ecification s FIG.01Hood with optional Chimney 7 1/2" 20 7/8" min. to 40"max. 14 7/8" 9 7/16" 10 5/16" 29 7/8" - 30" Hood 19 1/2" 35 7/8" - 36" Hood FIG.02a Duct / Bracket / Electrical Dimensions 30” Hood 5 7/8" 4" 4 5/16" FIG.02b Duct / Bracket / Electrical Dimensions 36” Hood 5 7/8" 4" 4 5/16" 4 9 7/8" 12 5/8" 2 15/16" 25 1/4" 9 7/8" 15 5/8" 2 15/16" 31 1/4" 8 3/4" 11/16" 11/16"
Résumé du contenu de la page N° 6
Pl anning The In stallation VENTING REQUIREMENTS Determine which venting method is best for your application. Ductwork can extend either through the wall or the roof. The length of the ductwork and the number of elbows should be kept to a mini- mum to provide efficient performance. The size of the ductwork should be uniform. Do not install two elbows together. Use duct tape to seal all joints in the ductwork system. Use caulking to seal exterior wall or floor opening around the cap. Flexible duc
Résumé du contenu de la page N° 7
In st allation In st ruction s TOOLS NEEDED FOR INSTALLATION PARTS SUPPLIED FOR INSTALLATION Saber Saw or Jig Saw 1 Hardware Package Drill 1 Literature Package 1 1/4 Wood Drill Bit Pliers PARTS NEEDED FOR INSTALLATION Phillips Screwdriver 2 Conduit Connectors Flat Blade Screwdriver Power Supply Cable Wire Stripper or Utility Knife 1 Wall or Roof Cap Metal Snips All Metal Ductwork Measuring Tape or Ruler Level Pencil Caulking Gun Duct Tape This euro hoo
Résumé du contenu de la page N° 8
Inst allation Instructions FIG.05A STANDARD INSTALLATION DIMENSIONS (FRONT VIEW) 10 5/16" 30" or 36" 30" cabinet 36" base 7
Résumé du contenu de la page N° 9
Inst allation Instructions FIG.05B CEILING HEIGHT VARIANCES WITH OPTIONAL CHIMNEY KIT (SIDE VIEW) Upper Chimney Cover min 21 7/8" max 40" Lower Chimney Cover 10 5/16" 19 1/2" 30" Max. = 9' 8 5/16" (116 5/16") Min. = 8' 2 3/16" (98 3/16") cabinet base 36" 8
Résumé du contenu de la page N° 10
In st allation In st ruction s CALCULATE THE DUCT RUN LENGTH The duct run should not exceed 35 feet if ducted six inch (6”) round ductwork. Calculate the length of the ductwork by adding the equivalent feet in fig. 06 for each piece of duct in the system an example 0 is given in fig. 07. For best results, use no more than three 90 elbows. Make sure that there is a minimum of 24” of straight duct between elbows if more than one is used. Do not install two elbows together. FIG.06 FIG.07 9 Feet St
Résumé du contenu de la page N° 11
In st allation In st ruction s 5) Determine and make all necessary cuts in the wall for the ductwork. Each euro hood is shipped from the factory vented through the top. In order to vent to the rear, ductwork must run first vertical then elbow to the back. The dimensions for the duct openings are given in Fig. 02. Install all ductwork before installing the euro hood. 6) Determine the proper location for the power supply cable as indicated in Fig. 2a & 2b. DO NOT turn on the power until installa
Résumé du contenu de la page N° 12
Inst allation Instructions 7) The brackets shown in Fig. 08 are also used to adjust the level of the canopy. Using a Phillips screwdriver, rotate the screw V2 to adjust the level of the canopy. 8) Connect the Power Supply Cable to the euro hood. Attach the White lead of the power supply to the White lead of the euro hood with a twist-on type wire connector. Attach the Black lead of the power supply to the Black lead of the euro hood with a twist-on type wire connector. Connect the Green ( Gre
Résumé du contenu de la page N° 13
Use & Care In f ormation CONTROL PANEL The control panel is located on the right-hand side under the canopy. FIG.12 LIGHT ON/OFF SWITCH ( A ) On/Off switch for the halogen light. Move the switch to "1" to turn the light ON and to "0" to turn it OFF. BLOWER ON/OFF SWITCH ( B ) On/Off switch for the blower. Move the switch to "1" to turn the blower ON and to "0" to turn it OFF. BLOWER SPEED SWITCH ( C ) Speed control for blower. Move the switch to position 1 for LOW Speed, 2 for MEDIUM speed and
Résumé du contenu de la page N° 14
Wi ring Diagram 30” & 36” Hoods 13
Résumé du contenu de la page N° 15
Se rvice HOW TO OBTAIN SERVICE: Before you call for service: 1) Is the circuit breaker tripped or the fuse blown? 2) Is there a power outage in the area? For warranty service, contact your local DCS authorized service agency. Provide service agency with the Model Number, Serial Number, and date of installation, and a brief description of the problem. If you need assistance in locating the authorized service agency in your area please contact our DCS Consumer Service Department for an authorized
Résumé du contenu de la page N° 16
War ranty LENGTH OF WARRANTY One (1) Year Full parts and Labor Covers the entire product Five (5) Year Limited warranty covering the switches and motor. DCS WILL PAY FOR All repair labor and parts found to be defective due to materials or workmanship for one full year “IN HOME” warranty during the first year of ownership. This does not apply if the unit was subjected to other than normal household use. Service must be provided by Authorized Factory Agent during normal working hours. No charges w
Résumé du contenu de la page N° 17
Notes 16
Résumé du contenu de la page N° 18
As product improvement is an ongoing process at DCS, we reserve the right to change specifications or design without notice. 5800 Skylab Road, Huntington Beach, CA. 92647 Tel: (714) 372-7000 Part No. 17386 Rev.A Fax: (714) 372-7001 Parts/Customer Service (888) 281-5698 www.dcsappliances.com Litho in USA 06/2001
