Résumé du contenu de la page N° 1
3-865-812-32 (1)
FM/MW/SW
Cassette
Car Stereo
GBGB
Operating Instructions
ES
Manual de instrucciones
CT
For installation and connections, see the supplied installation/connections
manual.
Para obtener información sobre la instalación y las conexiones, consulte el manual
de instalación/conexiones suministrado.
XR-C6200
ª 1999 by Sony Corporation
1
Résumé du contenu de la page N° 2
Welcome ! Thank you for purchasing this Sony Cassette When you operate this unit or a connected Player. This unit lets you enjoy a variety of optional CD unit with the CD TEXT function, features as well as an optional rotary the CD TEXT information will appear in the 2 commander or a supplied card remote display when you play a CD TEXT disc* . commander. 1 * You can connect a CD changer, an MD changer, a CD player, or an MD player. In addition to the cassette playback and radio 2 * A CD TEXT dis
Résumé du contenu de la page N° 3
Location of controls + – PRESET SOUND DISC MODE 6 D-BASS SEEK / AMS g LIST DSPL 1 OFF 2 3 SOURCE SHIFT SET UP PLAY MODE ENTER 1 2 3 4 56 OFF RELEASE XR-C6200 Refer to the pages listed for details. 1 SEEK/AMS (seek/Automatic Music 0 PRESET/DISC button Sensor/manual search) control During radio reception: 7, 9, 16, 19 Preset stations select 9 2 MODE (*) button During CD/MD playback: During tape playback: Disc change 16 Playback direction change 7 !Á DSPL (display mode change) button During radio
Résumé du contenu de la page N° 4
Card remote commander The corresponding buttons of the card SOURCE remote commander control the same functions as those on the unit. OFF 1 OFF button SOUND DSPL 2 SOUND button MODE 3 DSPL button 4 VOL button FF 5 PRST/DISC/FF-REW button PRST SEEK VOL 6 ATT button DISC AMS 7 SOURCE button REW 8 MODE (*) button ATT 9 SEEK/AMS button When the POWER SELECT switch is set to the B position, the unit cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed or a cassette
Résumé du contenu de la page N° 5
Attaching the front panel Attach part a of the front panel to part b of the unit as illustrated and push the left side Getting Started into position until it clicks. Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the reset a button with a pointed object, such as a b ballpoint pen. Notes • Be sure not to attach the front panel upside down. Reset button • Do not press the front panel too
Résumé du contenu de la page N° 6
2 Press (SHIFT). Setting the clock The clock uses a 12-hour digital indication. The clock starts. Example: To set the clock to 10:08 3 Press (SHIFT). 1 Press (SHIFT), then press (2) (SET UP) After the clock setting is complete, the repeatedly until “CLOCK” appears. display returns to normal playback mode. Note If the POWER SELECT switch on the bottom of the 1 Press (4) (n). unit is set to the B position, turn the power on first, then set the clock. The hour indication flashes. 2 Set the hour.
Résumé du contenu de la page N° 7
Fast-winding the tape During playback, push the SEEK/AMS Cassette Player control up or down and hold. SEEK / AMS Fast-forward Listening to a tape Rewind Insert a cassette. To start playback during fast-forwarding or Playback starts automatically. rewinding, press (MODE) (*). Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release, for each track you want to skip. If a cassette is already inserted, to start You can skip up to nine
Résumé du contenu de la page N° 8
Playing a tape in various Radio modes You can play the tape in various modes: •REP (Repeat Play) repeats the current track. •NR (Dolby NR) lets you select the Dolby* NR Memorizing stations B system. •METAL (Metal) lets you play a metal or CrO2 automatically tape. — Best Tuning Memory (BTM) •BL SKP (Blank Skip) skips blanks longer than eight seconds. The unit selects the stations with the strongest •ATA (Automatic Tuner Activation) turns on signals and memorizes them in the order of the tuner aut
Résumé du contenu de la page N° 9
5 Press (SHIFT). 3 Press the number button ((1) to (6)) on which the desired station is stored. Notes • The unit does not store stations with weak Tip signals. If only a few stations can be received, Press either side of (PRESET/DISC) to receive the some number buttons will retain their former stations in the order they are stored in the setting. memory (Preset Search Function). • When a number is already indicated in the display, the unit stores stations in order from the one currently displaye
Résumé du contenu de la page N° 10
2 Press (4) (n) after locating the Changing the display item desired character. Each time you press (DSPL), the item changes The flashing cursor moves to the next as follows: space. Frequency ÷ Clock After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. If you press (1) (N), the flashing cursor In the Motion Display mode, all the above moves to the left. items are scrolled in the display one by one in order. 3 Repeat steps 1 and
Résumé du contenu de la page N° 11
LIST MODE SOUND Erasing the station name 1 Tune in any station and press (LIST) for Other Functions two seconds. 2 Press (DSPL) for two seconds. You can also control this unit with an optional rotary commander. 3 Rotate the dial to select the name that you want to erase. Labelling the rotary 4 Press (5) (ENTER) for two seconds. The name is erased. commander Repeat steps 3 and 4 if you want to erase other names. Depending on how you mount the rotary commander, attach the appropriate label as show
Résumé du contenu de la page N° 12
By rotating the control Using the rotary (the SEEK/AMS control) commander The rotary commander works by pressing buttons and/or rotating controls. By pressing buttons (the SOURCE and MODE buttons) Rotate the control and release it to: •Locate the beginnings of tracks on the (SOURCE) tape. Rotate and hold the control momentarily, then release it to fast-wind the tape. To start playback while fast- winding the tape, press (MODE). (MODE) •Locate a specific track on a disc. Rotate and hold the contr
Résumé du contenu de la page N° 13
Press (SOUND) to Adjusting the sound adjust the volume and sound menu. characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels Press (LIST) to: independently for each source. • Display the memorized names. • Display the programme type. 1 Select the item you want to adjust by Changing the operative direction pressing (SOUND) repeatedly. The operative direction of controls is factory- VOL (volume) n BAS (bass) n set as shown below. TRE (treble)
Résumé du contenu de la page N° 14
Changing the sound and Boosting the bass sound — D-bass display settings You can enjoy a clear and powerful bass The following items can be set: sound. The D-bass function boosts the low •CLOCK (page 6). frequency signal with a sharper curve than •BEEP – to turn the beep sound on or off. conventional bass boost. •RM (Rotary Commander) – to change the You can hear the bass line more clearly even operative direction of the rotary commander. while the vocal volume remains the same. You — Select “NO
Résumé du contenu de la page N° 15
Tip With Optional Equipment The Motion Display mode can be turned off. (See “Changing the sound and display settings” on CD/MD Unit page 14). You can label CD and CD TEXT discs with a This unit can control a maximum of ten personalized name using the disc memo external CD/MD units in this configuration: function. Refer to “Labelling a CD” (page 17). CD unit – maximum of five However, if you use personalized labels, they MD unit – maximum of five will always take priority over the original CD Any
Résumé du contenu de la page N° 16
Locating a specific track — Automatic Music Sensor (AMS) Playing tracks repeatedly — Repeat Play During playback, push the SEEK/AMS control up or down and release for each You can select: track you want to skip. •REP-1 – to repeat a track. SEEK / AMS •REP-2 – to repeat a disc. To locate succeeding tracks 1 During playback, press (SHIFT), then To locate press (3) (PLAY MODE) repeatedly until preceding tracks “REP” appears. 2 Press (4) (n) repeatedly until the Locating a specific point in a track
Résumé du contenu de la page N° 17
Displaying the disc memo name Labelling a CD — Disc Memo Press (DSPL) during CD or CD TEXT disc (For a CD unit with the custom file function) playback. You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the Each time you press (DSPL) during CD or disc by name (page 18) and select specific CD TEXT playback, the item changes as tracks for playback (page 19). follows: $ 1 Play the CD and press (LIST) for two Elapsed p
Résumé du contenu de la page N° 18
Erasing the disc memo Locating a disc by name 1 Press (SOURCE) repeatedly to select CD. — List-up (For a CD unit with the custom file function or an MD unit) 2 Press (MODE) repeatedly to select the CD unit. You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labelling 3 Press (LIST) for two seconds. a CD” (page 17). 4 Press (DSPL) for two seconds. 1 Press (LIST). The name assigned to the current disc appears in the display. 5 R
Résumé du contenu de la page N° 19
Playing specific tracks only Selecting specific tracks You can select: •BANK-ON – to play the tracks with the for playback — Bank “PLAY” setting. (For a CD unit with the custom file function) •BANK-INV (Inverse) – to play the tracks with the “SKIP” setting. If you label the disc, you can set the unit to skip or play the tracks of your choice. 1 During playback, press (SHIFT), then 1 Start playing the disc and press (SHIFT), press (3) (PLAY MODE) repeatedly until then press (3) (PLAY MODE) for tw
Résumé du contenu de la page N° 20
Notes on Cassettes Additional Cassette care • Do not touch the tape surface of a cassette, as Information any dirt or dust will contaminate the heads. • Keep cassettes away from equipment with built-in magnets such as speakers and amplifiers, as erasure or distortion on the recorded tape could occur. Precautions • Do not expose cassettes to direct sunlight, • If your car was parked in direct sunlight extremely cold temperatures, or moisture. resulting in a considerable rise in temperature • Slac
