Instruction d'utilisation Grizzly Super Heavy-Duty Workbench H8361

Résumé du contenu de la page N° 1

MODEL H8361/H8362
60"/ 72"SUPER HEAVY-
DUTY WORKBENCHES
INSTRUCTIONS
Introduction
F
Sized to fit the needs of any shop, these work-
benches feature laminated birch construction for
E
strength and stability.
A
B
Specifications
H8361
Construction .............................. Laminated Birch C
D
Shipping Weight .....................................248 lbs.
Dimensions ............................60"L x 30"W x 3"T
Table Height Above Floor ..............................38"
Figure 1. Model H8361/

Résumé du contenu de la page N° 2

Table Assembly Vise Installation 5 1. Place eight ⁄16"-18 dowel nuts in the holes on 1. insert the metal shafts and threaded rod of the cross braces, as shown in Figure 3. the vise through the holes in the vise wood block and into the vise support block under the bench top (see Figure 5). 5 ⁄16"-18 5 ⁄16"-18 x 4" Dowel Nut Machine Screw Threaded Rod Wood Block 5 ⁄16" Flat Metal Shaft Washer Right Leg Cross Brace Left Leg Vise Support Block Figure 3. Attaching cross braces and legs. Figure

Résumé du contenu de la page N° 3

1 7 4. using an ⁄8" drill bit, drill 1 ⁄16" deep holes through the vise plate mounting holes and into the wood block. To reduce risk of serious injury when using this bench: 5. Secure the vise plate to the wood block with • Do not apply an unbalanced load that 7 two #5 x 1 ⁄16" wood screws (Figure 6). could result in the workbench tipping over. 6. Place a cotter pin in the end of the threaded • Do not stand or climb on the rod, bending it tightly around the shaft to workbench. keep it

Résumé du contenu de la page N° 4

H8361/H8362 Parts Breakdown 10 11 5 1 12 6 9 2 8 3 6 7 4 H8361 Parts List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8361001 BENCH TOP 7 PH8361007 MACHINE SCREW 5/16"-18 X 4" 2 PH8361002 RIGHT SIDE LEG 8 PH8361008 DOWEL NUT 5/16"-18 3 PH8361003 LEFT SIDE LEG 9 PH8361009 WOOD SCREW 5/16" X 2-1/2" 4 PH8361004 CROSS BRACE 10 PH8361010 WOOD SCREW #5 X 1-7/16" 5 PH8361005 TAIL VISE 11 PH8361011 COTTER PIN 6 PW07 FLAT WASHER 5/16 12 PAW05M HEX WRENCH 5MM H8362 Parts List REF PART # DESCRIPTION