Résumé du contenu de la page N° 1
CD RECEIVER
CD-RECEIVER
RECEPTEUR CD
CD-RECEIVER
KD-LHX601
• This unit is equipped with the display demonstration. To cancel it, see page 8.
• Dieses Gerät ist mit einer Demonstrationsfunktion für das Display ausgestattet. Auf Seite 8 wird
beschrieben, wie Sie diese Demonstrationsfunktion deaktivieren können.
• Cet appareil est équipé d’une fonction de démonstration des affichages. Pour l’annuler, référez-
vous à la page 8.
• Dit toestel heeft een display-demonstratiefunctie. Zie bladzijde 8 voo
Résumé du contenu de la page N° 2
IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: Visible and invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED OUTSIDE THE UNIT. Caution: If the temperature inside the car is below 0˚ C, the movement of animation and text scroll will be hal
Résumé du contenu de la page N° 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 SOUND ADJUSTMENTS ................... 40 Adjusting the sound .................................. 40 LOCATION OF THE BUTTONS ............ 4 Selecting preset sound modes Control panel............................................. 4 (iEQ: intell
Résumé du contenu de la page N° 4
LOCATION OF THE BUTTONS Control panel 84 /¢ buttons 1 (standby/on/attenuator) button 2 TP/PTY (traffic programme/programme type) 9 SEL (select) button button p D (DISP: display) button 3 Control dial q Number buttons 4 Display window w M (MODE) button 5 FM/AM DAB button e Remote sensor 65 (up) button r∞ (down) button 70 (eject) button t CD/CD-CH (CD changer) LINE button (angle) button y (control panel release) button Illumination Navigation for easy operations If you use M (MODE) or SEL (selec
Résumé du contenu de la page N° 5
3 • Selects the preset stations or service while Remote controller listening to the radio or the DAB tuner. Each time you press the button, the preset station or service number increases, and the selected station or service is tuned in. • Skips to the first track of the previous folder while listening to an MP3 disc or a WMA disc. Each time you press the button, you can move to the previous folder and start playing the first track. • While playing an MP3 disc on an MP3- compatible CD changer; –
Résumé du contenu de la page N° 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no (back side) obstacle in between. WARNING: • Store the battery in a place where children cannot reach. If a child accidentally swallows the battery, Remote sensor consult a doctor immediately. • Do not recharge, short, disasse
Résumé du contenu de la page N° 7
BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. To increase the volume 1 Turn on the power. To decrease the volume Volume level appears. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Current sound mode (iEQ) • To operate the FM/AM tuner or the DAB (see page 41) tuner, press and hold FM/AM DAB repeatedly. 4 Adjust the sound as you want. (See p
Résumé du contenu de la page N° 8
To drop the volume in a moment 2 Press number button 1 to select “MOVIE”—Movie category of the Press briefly while listening to any PSM settings. source. “ATT” starts flashing on the display, and the volume level will drop in a moment. The “Graphics” setting screen appears on To resume the previous volume level, press the the display. button briefly again. • If you turn the control dial, you can also restore the sound. To turn off the power Press and hold for more than one second. • If you tur
Résumé du contenu de la page N° 9
Setting the clock 4 Set the minute. 1 Select “Clock Min” (minute). You can also set the clock system to either 2 Adjust the minute. 24 hours or 12 hours. 12 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see pages 53 and 54.) The next-step-operation buttons start flashing. 5 Set the clock system. 1 Select “24H/12H.” 2 Press number button 2 to select 2 Select “24Hours” or “12Hours.” “CLOCK”—Clock category of the 12 PSM settings. Th
Résumé du contenu de la page N° 10
RADIO OPERATIONS Listening to the radio 3 Start searching a station. To search stations of You can use either automatic searching or manual higher frequencies searching to tune in to a particular station. Searching a station automatically: To search stations of lower frequencies Auto search When a station is received, searching stops. 1 Select the FM/AM tuner. To stop searching before a station is received, Each time you press and hold press the same button you have pressed for the button, the F
Résumé du contenu de la page N° 11
3 Press and hold ¢ or 4 To tune in to FM stations only with strong until “Manual Search” starts flashing signals—LO/DX (Local/Distance-extreme) on the display. While searching FM stations (including SSM— see page 12), this unit stops searching whenever it detects signals (DX mode: The DX indicator is lit—initial setting). If received signals are weak, you may only hear noises. By setting LO/DX to “Local,” you can make this unit detects only stations with sufficient signal strength. 1 Press M (M
Résumé du contenu de la page N° 12
When an FM stereo broadcast is hard to Storing stations in memory receive: You can use one of the following two methods to Set the FM reception mode to “Mono On.” store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong- 1 Press M (MODE) while listening to an FM station Sequential Memory) stereo broadcast. • Manual preset of both FM and AM stations “Mode” appears on the display. The next-step-operation buttons FM station automatic preset: SSM start flashing. You can
Résumé du contenu de la page N° 13
Local FM stations with the strongest signals are 4 Press and hold the number button searched and stored automatically in the band (in this example, 1) for more than number you have selected (FM1, FM2, or FM3). 2 seconds. These stations are preset in the number buttons —No.1 (lowest frequency) to No.6 (highest frequency). When automatic preset is over, the station stored in number button 1 will be automatically tuned in. The display pattern automatically changes to the small animation display (se
Résumé du contenu de la page N° 14
2 Select the band (FM1 – 3, AM). Tuning in to a preset station Each time you press the button, the band changes as follows: You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing FM1 FM2 FM3 AM stations in memory” on pages 12 and 13. 3 Press and hold 5 (up) or ∞ (down) Selecting a preset station directly until the preset station list for the 1 Select the FM/AM tuner. current band (FM1, FM2, FM3, or AM) Each time you
Résumé du contenu de la page N° 15
Changing the display pattern By pressing D (DISP), you can change the information shown on the display. Each time you press the button, the display patterns change as follows: • When receiving an AM or non FM RDS- • When receiving an FM RDS-station station (see the following pages) Large animation display Large animation display PS name Appears only when Current sound mode Current sound mode selecting a preset (iEQ) (see page 41) (iEQ) (see page 41) station. Small animation display 1 Small anima
Résumé du contenu de la page N° 16
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
Résumé du contenu de la page N° 17
Using Traffic News Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the Traffic News Standby Reception allows the unit PSM items appears on the display. to switch temporarily to Traffic Announcement (TA) from the current source (another FM station, (PSM: see pages 53 and 54.) DAB, CD, or other connected components). • Traffic News Standby Reception will not work if you are listening to an AM station. 2 Press number button 4 to select Press TP/PTY to activate
Résumé du contenu de la page N° 18
7 When the current source is other than FM 3 Select one of the twenty-nine PTY or DAB, the TP indicator lights up. codes. (See page 22.) If a station (or service) starts broadcasting a Selected code name traffic announcement, “Traffic News” appears appears on the display on the display, and this unit automatically and is stored into changes the source and tunes in to the station memory. (or service). Note: See also “Traffic News Standby Reception” on page 4 Finish the setting. 27. Using PTY Stan
Résumé du contenu de la page N° 19
The PTY indicator either lights up or flashes. Searching for your favorite programme • If the PTY indicator lights up, PTY Standby You can search for any one of the PTY codes. Reception is activated. In addition, you can store your 6 favorite If a station (or service) starts broadcasting the programme types in the number buttons. selected PTY programme, this unit When shipped from the factory, the following automatically tunes in to the station (or 6 programme types have been stored in the servi
Résumé du contenu de la page N° 20
3 Press and hold the number button for more than 2 seconds to store the PTY code selected into the preset number you want. Ex.: When “Rock M” is selected How to use the 5 (up) or ∞ (down) button By pressing 5 (up) or ∞ (down) repeatedly, you can show the list of your preset PTY Selected preset number flashes for a while. codes and all twenty-nine PTY codes (six PTY codes at a time). First, the list of your 4 Press and hold TP/PTY for more than stored PTY codes appears, then all twenty- 2 seconds
