Résumé du contenu de la page N° 1
CD RECEIVER KD-S890
RECEPTOR CON CD KD-S890
RECEPTEUR CD KD-S890
ATT SOUND
U
R SOURCE F
D
VOL VOL
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
INSTRUCTIONS the top or bottom of the cabinet.
Retain this information for future
MANUAL DE INSTRUCCIONES
reference.
MA
Résumé du contenu de la page N° 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Résumé du contenu de la page N° 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 MP3 INTRODUCTION ...................... 16 How to use the M (MODE) button ............. 3 What is MP3?............................................ 16 How are MP3 files recorded and LOCATION OF THE BUTTONS ............ 4 played back? .......
Résumé du contenu de la page N° 4
LOCATION OF THE BUTTONS Control panel Display window 1 (standby/on/attenuator) button i E (EQ: equalizer) button 2 SEL (select) button o CD button 3 Control dial ; (control panel release) button 4 Display window 5 Loading slot Display window 64 /¢ buttons a LOUD (loudness) indicator 7 FM/AM button s EQ (equalizer) indicator 85 (up) button d CD–in indicator +10 button f CD indicator 90 (eject) button g FM band indicators (FM1, FM2, FM3) p∞ (down) button h AM band indicator –10 button j Tuner rec
Résumé du contenu de la page N° 5
3 • Selects the preset stations while listening to Remote controller the radio. Each time you press the button, the preset station number increases, and the selected station is tuned in. ATT SOUND • Skips to the first file of the previous folder while listening to an MP3 disc. Each time you press the button, you can move to the previous folder and start playing U the first file. R SOURCE F 4 Functions the same as the control dial on the D main unit. Note: These buttons do not function for the pr
Résumé du contenu de la page N° 6
3. Return the battery holder. Preparing the remote controller Insert again the battery holder by pushing it until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. (back side) Remote sensor • Do not expose the remote sensor to strong WARNING: light (direct sunlight or artificial lighting). • Store the battery in a place where children cannot reach. Installing the ba
Résumé du contenu de la page N° 7
BASIC OPERATIONS 1 3 2 Turning on the power 4 Adjust the sound as you want. (See pages 22 and 23.) 1 Turn on the power. To drop the volume in a moment Press briefly while listening to any Note on One-Touch Operation: source. “ATT” starts flashing on the display, and When you select a source in step 2 below, the the volume level will drop in a moment. power automatically comes on. You do not have To resume the previous volume level, press the to press this button to turn on the power. button bri
Résumé du contenu de la page N° 8
4 Finish the setting. Setting the clock 1 Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,” “SCROLL,” or “TAG DISP” appears on the display. To check the current clock time or change the display mode Press DISP (display) repeatedly. 2 Set the hour. Each time you press the button, 1 Select “CLOCK H” (hour) if not shown on the display changes as follows: the display. 2 Adjust the hour. • During tuner operation: 2 1 Frequency Clock • During disc operation: Elapsed C
Résumé du contenu de la page N° 9
RADIO OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM 1 – 3, AM). Each time you press the 1 Select the band (FM 1 – 3, AM). button, the band changes as Each time you press the follows: button, the band ch
Résumé du contenu de la page N° 10
Storing stations in memory 3 Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to To tune in to stations of store broadcasting stations in memory. higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To tune in to stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM • If you release your finger from th
Résumé du contenu de la page N° 11
Notes: Manual preset • A previously preset station is erased when a new You can preset up to 6 stations in each band station is stored in the same preset number. (FM1, FM2, FM3, and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex.: Storing FM station of 88.3 MHz into the during battery replacement). If this occurs, preset preset number 1 of the FM1 band. the stations again. 1 Select the band (FM1 – 3, AM) you want to store st
Résumé du contenu de la page N° 12
CD OPERATIONS Refer to “MP3 OPERATIONS” on pages 18 to 21 All tracks will be played repeatedly until you stop for operating MP3 discs. playback. Note: Playing a CD When a CD is inserted upside down, “EJECT” and the CD–in indicator flash on the display and the CD Insert a CD into the loading slot. automatically ejects. The unit turns on, draws the CD and starts playback automatically. To stop play and eject the CD Press 0. CD play stops and the CD automatically ejects from the loading slot. The s
Résumé du contenu de la page N° 13
To go to a track quickly (+10 and –10 buttons) Locating a track or a 1 Press M (MODE) to enter the functions mode particular portion on a CD while playing a CD. To fast-forward or reverse the track Press and hold ¢ , while playing a CD, to fast-forward the track. 2 Press +10 or –10. To skip 10 tracks* forwards Press and hold 4 , to the last track while playing a CD, to reverse the track. To skip 10 tracks* backwards to the first track To go to the next or previous tracks * The first time you p
Résumé du contenu de la page N° 14
To play back tracks repeatedly Selecting CD playback modes (Track Repeat Play) To play back tracks at random You can play back the current track repeatedly. (Disc Random Play) 1 Press M (MODE) to enter the functions mode while playing a You can play back all tracks on the CD at random. CD. 1 Press M (MODE) to enter the functions mode while playing 2 Press RPT (repeat), while still a CD. in the functions mode, so that “TRK RPT” appears on the 2 Press RND (random), while display. still in the func
Résumé du contenu de la page N° 15
Playing a CD Text Prohibiting disc ejection In a CD Text, some information about the disc (its You can prohibit the disc ejection and can lock a disc title, performer, and track title) is recorded. disc in the loading slot. This CD Text information will be shown automatically when you play a CD Text. While pressing CD, press and hold 0 for more than 2 seconds. To change the CD Text information manually, select text display mode while playing a CD Text. Each time you press the “EJECT” flashes on
Résumé du contenu de la page N° 16
MP3 INTRODUCTION Precautions when recording MP3 files What is MP3? on a CD-R or CD-RW MP3 is an abbreviation of Motion Picture Experts This unit can only read MP3 files that are Group (or MPEG) Audio Layer 3. MP3 is simply a recorded in the format that is compliant with ISO file format with a data compression ratio of 1:10 9660 Level 1, Level 2, or Joliet. (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can. How are MP3 fil
Résumé du contenu de la page N° 17
MP3 folder/file configuration ROOT 01 02 04 08 1 2 3 4 03 05 09 5 6 10 11 20 21 06 07 8 12 13 22 23 24 7 9 14 15 16 17 18 19 : Root ROOT 01 : Folders : MP3 files Note: There is no limit on the number of the hierarchy levels (nested folders). However, up to 8 hierarchy levels is recommended for stable operations. MP3 playback/search order • The numbers in circles below the MP3 files ( ) indicate the playback order and search order of the MP3 files. Normally, this unit plays back MP3 files in the
Résumé du contenu de la page N° 18
MP3 OPERATIONS Refer also to “CD OPERATIONS” on pages 12 to All files will be played repeatedly until you stop 15. playback. Notes: Playing an MP3 disc • MP3 discs require a longer readout time. (It differs due to the complexity of the folder/file Insert an MP3 disc into the loading slot. configuration.) The unit turns on, draws • When playback starts, folder and file names (or ID3 the disc and starts tags) will automatically appears. (See also page 19.) playback automatically. • If you change t
Résumé du contenu de la page N° 19
To change the display information Locating a file or a particular While playing back an MP3 file, portion on an MP3 disc you can change the MP3 disc information shown on the display. For “MP3 playback/search order” see page 17. Each time you press DISP (display), the display changes to To fast-forward or reverse the file show the following: Press and hold ¢ while playing an MP3 • When “TAG DISP” is set to “TAG ON” disc, to fast-forward the (initial setting: see page 24) file. Press and hold 4
Résumé du contenu de la page N° 20
2 Press +10 or –10. Press the number button corresponding to the folder number to start playing the first file in the To skip 10 files* forwards selected folder. to the last file To skip 10 files* backwards to the first file * The first time you press +10 or –10 button, the file skips to the nearest higher or lower • To select a folder number from 01 – 06: file with a file number of multiple ten (ex. Press 1 (7) – 6 (12) briefly. 10th, 20th, 30th). • To select a folder number from 07 – 12: Then
