Résumé du contenu de la page N° 1
KD-SX1000R
CD RECEIVER KD-SX1000R
RECEPTOR CON CD KD-SX1000R
RECEPTEUR CD KD-SX1000R
/I SEL
ATT
TP
DISP
RDS
40WX4
PTY MO/RND
SSM
RPT
TEXT
INT
VCR CONTROL
EXT BAND
78 VCR 91011 12
12 3 4 5 6 CD-CH TUNER CD
SOUND
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the
Résumé du contenu de la page N° 2
INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Résumé du contenu de la page N° 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS BASIC OPERATIONS ....................................................4 RADIO BASIC OPERATIONS .........................................5 Listening to the radio ..................................................................... 5 Storing stations in memory ......................................
Résumé du contenu de la page N° 4
BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly, see page 26. 3 2 / I 1 ATT Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 EXT BAND Select the source. CD-CH TUNER C D To operate the tuner, see pages 5 – 17. To operate the CD player, see pages 18 – 22. To operate the CD changer, see pages 40 – 42. To operate
Résumé du contenu de la page N° 5
RADIO BASIC OPERATIONS Listening to the radio When using this unit in an area other than North or South America: You need to change the AM/ FM channel intervals. See “Changing the AM/FM channel intervals” on page 33. 2 1 1 BAND Select the band (FM1, FM2, FM3 or AM). TUNER You can select any one of FM1, FM2, and FM3 to listen to an FM station. F1 F2 F3 AM (FM1) (FM2) (FM3) Selected band appears. 2 To search stations Start searching a station. of higher When a station is received, searching stops.
Résumé du contenu de la page N° 6
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1,FM2 and FM3). 2 1 1 BAND Select the FM band number (FM1,FM2 or TUNER FM3) you want to store FM stations into. F1 F2 F3 AM (FM1) (FM2) (FM3) 2 Press and hold both buttons for more t
Résumé du contenu de la page N° 7
Manual preset You can preset up to 6 stations in each band (FM1,FM2,FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 3 1 1 BAND Select the FM1 band. TUNER 2 Tune into a station of 88.3 MHz. SSM See page 5 to tune into a station. 3 78 VCR Press and hold the number button (in this 12 example, 1) for more than 2 second. Preset number and “MEMO” flashes alternately for a while. 4 Repeat the above procedure to store other stations into other
Résumé du contenu de la page N° 8
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 6 and 7. DISP 21 BAND 1 Select the band (FM1,FM2,FM3 or AM) you TUNER want. F1 F2 F3 AM (FM1) (FM2) (FM3) VCR CONTROL 78 VCR 9 1011 12 2 12 3 4 5 6 Select the number (1 – 6) for the preset station you want. To change the display information while receiving an FM RDS station Press DISP. Each time you press the button, the display changes a
Résumé du contenu de la page N° 9
RDS OPERATIONS What you can do with RDS RDS (Radio Data System) allows FM stations to send an additional signal along with their regular program signals. For example, the station send their station names, as well as information about what type of program they broadcast, such as sports or music, etc. By receiving the RDS signals, this unit can do the following: • Tracing the same programme automatically (Network-tracking Reception) • Standby Reception of TA (Traffic Announcement) or your favorite
Résumé du contenu de la page N° 10
Mode 1 (AF:on) Network-Tracking is activated. Switches to another station, within the same network, broadcasting the same programme when the receiving signals from the current station become weak. Mode 2 (AF:off) Network-Tracking is deactivated. The same programme can be received on different frequencies. Programme 1 broadcasting on frequency E Programme 1 broadcasting on frequency A Programme 1 broadcasting on frequency B Programme 1 broadcasting on frequency C Programme 1 broadcasting on frequ
Résumé du contenu de la page N° 11
Using Standby Reception Standby Reception allows the unit to switch temporarily to a programme of your favorite programme (PTY: Programme Type) and Traffic Announcement (TA) from the current source (another FM station, CD, and other connected components). Note: Standby Reception will not work if you are listening to an AM station. TA Standby Reception • When TP/RDS is pressed briefly in the FM mode, the TP indicator is lit TP RDS during reception of a TP station and the TA standby mode is engage
Résumé du contenu de la page N° 12
Selecting Your Favorite Programme for PTY Standby Reception You can select your favorite programme for PTY Standby Reception to store in memory. When shipped from the factory, “NEWS” is stored as the programme type for PTY Standby Reception. 1, 4 3 2 1 SEL Press and hold the button for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 27). 2 Select “PTY STANDBY” if not shown on the SSM display. 3 Select one of twenty-four PTY codes. (See the table on page 17.) Selected cod
Résumé du contenu de la page N° 13
To store your favorite programme types 2 1, 5 3 4 SEL 1 Press and hold the button for more than 2 seconds to call up the Preferred Setting Mode (PSM: see page 27). 2 SSM Select “PTY SEARCH” if not shown on the display. 3 Select one of twenty-four PTY codes. (See the table on page 17.) Selected code name appears on the display. • If the code already stored in memory is selected, it will flash on the display. VCR CONTROL 78 VCR 9 1011 12 4 12 3 4 5 6 Press and hold the number button for more than
Résumé du contenu de la page N° 14
To search your favorite programme type 1 2 1 PTY Press and hold the button for more than 1 second while listening to an FM station. The last selected PTY code and preset number appear. VCR CONTROL 2 78 VCR 9 1011 12 12 3 4 5 6 Select one of PTY codes stored in the preset number buttons (1 to 6). Ex. When “CLASSICL” is stored in preset number button 2. PTY search for your favorite programme starts after 5 seconds. • If there is a station broadcasting a programme of the same PTY code you selected
Résumé du contenu de la page N° 15
Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons Usually when you press the number button, the preset station is tuned in. However, when the preset station is an RDS station, something different will happen. If the signals from that preset station are not sufficient for good reception, this unit starts searching another station broadcasting the same programme as the original preset station is broadcasting, then if any station broadca
Résumé du contenu de la page N° 16
Automatic clock adjustment When shipped from the factory, the clock built in this unit is set to be readjust automatically using the CT (Clock Time) data in the RDS signal. If you do not want to use automatic clock adjustment, follow the procedure below. • See also “Changing the general settings (PSM)” on page 27. 1. Press and hold SEL (select) for more than 2 seconds so that “PSM” appears on the lower part of the display. 2. Select “AUTO ADJUST” with ¢ or 4 . 3. Select “ADJUST OFF” by turning t
Résumé du contenu de la page N° 17
PTY codes SOFT RCK: Album cuts with a generally No. Indications on No. Indications on soft tempo. the display the display TOP 40: Current hits, often 13 NOSTALGA 1 NEWS encompassing a variety of 14 JAZZ 2 INFORM rock styles. COUNTRY: Country music, including 3 SPORTS 15 CLASSICL contemporary and traditional styles. 16 R&B 4 TALK OLDIES: Popular music, usually rock, 5 ROCK 17 SOFT R&B with 80% or greater non- current music. 18 LANGUAGE 6 CLS ROCK SOFT: A cross between adult hits 19 REL MUSC 7 AD
Résumé du contenu de la page N° 18
CD OPERATIONS Playing a CD 1 1 Open the control panel. 2 1. Insert a disc into the loading slot. Th The unit turns on, draws a CD and starts playback automatically. 2. Close the control panel by hand. Total track number Total playing time of Elapsed of the inserted disc the inserted disc Current track playing time Notes: • When a CD is inserted up side down, “PLEASE EJECT” appears on the display. When you open the control panel by pressing 0, the CD automatically ejects. • When you
Résumé du contenu de la page N° 19
Locating a track or a particular portion on a CD Number buttons ¢ 4 To fast forward or reverse the track Press and hold ¢ , while playing a CD, to fast forward the track. SSM Press and hold 4 , while playing a CD, to reverse the track. To go to the next track or the previous track Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of SSM the next track is located and played back. Press 4 briefl
Résumé du contenu de la page N° 20
Selecting CD playback modes MO/RND RPT INT To play back tracks at random (Random Play) You can play back all tracks on the CD at random. Each time you press MO/RND (Mono/Random) while playing a CD, CD MO/RND random play mode turns on and off alternately. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. Each time you press and hold
