Instruction d'utilisation Harbor Freight Tools Mini250 PSI

Résumé du contenu de la page N° 1

®
MINI AIR COMPRESSOR
250 PSI
Model 04077
ASSEMBLY and OPERATING
INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright c 2003 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Résumé du contenu de la page N° 2

Specifications Power Requirements 12 VDC Maximum Pressure 250 PSI Pressure Gauge 0-300 PSI, 0-20 Bars Overall Dimensions 5-1/2” x 2-7/8” W x 4-7/8” H Power Cord Length 10 Feet (including switch) Hose Length 18” (with valve adapter) Includes two nozzle adapters, sport needle, built in cigarette lighter plug storage slot. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep yo

Résumé du contenu de la page N° 3

9. Maintain tools with care. Keep tools clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords and air hoses periodically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times. 10. Disconnect Compressor. Disconnect cigarette lighter plug in when not in use. 11. Avoid unintentional starting. Be sure the thumbwheel switch is in the Off positi

Résumé du contenu de la page N° 4

Operation 1. Remove the Power Cord/Cigarette Plug (#11) from the recessed holder on the unit. See FIGURE 1. FIGURE 1 EXPLOSION DANGER Before inflating tires or toys check the manufacturer’s recommended air pres- sure. Do not exceed that pressure. Over inflation Cord/Cigarette Plug (#11) may result in an explosion. Holder 2. Check to make sure the Thumbwheel Switch on the power cord is in the “off” position. 3. Situate the Compressor outside of the car. 3. Plug the Cord/Cigarette Plug (#11)

Résumé du contenu de la page N° 5

Parts List Part No. Description 1 Hull 2 Cylinder Head 3 Gauge 4Plug 5 Rubber Hose 6 Air Outlet 7 Seal 8 Motor 9 Shaft 10 Gasket 11 Power Cord/Cigarette Plug Maintenance 1. Visually inspect the unit before each use to make sure the hoses are properly attached and the hoses and the power cord are not frayed or torn. 2. Check that the cigarette plug is clean of dirt, grease, or debris. 3. Make sure the universal outlet adapter is clean of dirt, grease, or debris. PLEASE READ THE FOLLOWING CAREF

Résumé du contenu de la page N° 6

Assembly Drawing Valve Lock Page 6 SKU 04077