Résumé du contenu de la page N° 1
REFRIGERATOR
USER INSTRUCTIONS
THANK YOU for purchasing this high-quality product. If you should experience a problem not covered in TROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777.
You will need your model and serial number, located on the inside wall of the refrigerator compartment.
Table of Contents / Índice / Tab
Résumé du contenu de la page N° 2
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions: ■ Plug into a grounded 3 prong outlet. ■ Use nonflammable cleaner. ■ Do not remove ground prong. ■ Keep flammable materials and vapors, such as gasoline, away from refrigerator. ■ Do not use an adapter. ■ Use two or more people to move and install refrigerator. ■ Do not use an extension cord. ■ Disconnect power before installing ice maker (
Résumé du contenu de la page N° 3
Location Requirements Electrical Requirements WARNING WARNING Explosion Hazard Electrical Shock Hazard Keep flammable materials and vapors, such as Plug into a grounded 3 prong outlet. gasoline, away from refrigerator. Do not remove ground prong. Failure to do so can result in death, explosion, or fire. Do not use an adapter. Do not use an extension cord. To ensure proper ventilation for your refrigerator, allow for ¹⁄₂" (1.25 cm) space on each side and at the top. When installing your Failure
Résumé du contenu de la page N° 4
5. Using a cordless drill, drill a ¹⁄₄" (6.35 mm) hole in the cold Water Pressure water pipe you have selected. A A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water B G dispenser and ice maker. If you have questions about your water C pressure, call a licensed, qualified plumber. Reverse Osmosis Water Supply IMPORTANT: The pressure of the water supply coming out of a F E D reverse osmosis system going to the water inlet valve
Résumé du contenu de la page N° 5
Style 2 Complete the Installation 1. Unplug refrigerator or disconnect power. 2. Remove and discard the black nylon plug from the gray water tube on the rear of the refrigerator. WARNING 3. If the gray water tube supplied with the refrigerator is not long enough, a ¹⁄₄" x ¹⁄₄" (6.35 mm x 6.35 mm) coupling is needed in order to connect the water tubing to an existing household water line. Thread the provided nut onto the coupling on the end of the copper tubing. NOTE: Tighten the nut by ha
Résumé du contenu de la page N° 6
■ Wait 24 hours before you put food into the refrigerator. If you add food before the refrigerator has cooled completely, your Crisper Humidity Control food may spoil. (on some models) NOTE: Adjusting the Refrigerator and Freezer Controls to a You can control the amount of humidity in the moisture-sealed higher (colder) than recommended setting will not cool the crisper. Adjust the control to any setting between LOW and compartments any faster. HIGH. LOW (open) for best storage of fruit
Résumé du contenu de la page N° 7
The Water Dispenser The Dispenser Lock (on some models) IMPORTANT: Dispense enough water every week to maintain a The dispenser can be turned off for easy cleaning or to avoid fresh supply. unintentional dispensing by small children and pets. To Dispense Water: NOTE: The lock feature does not shut off power to the product, to the ice maker, or to the dispenser light. It simply deactivates 1. Press the WATER button to select water. the dispenser lever. The ice and water dispensers will not wo
Résumé du contenu de la page N° 8
Removing and Replacing Ice Storage Bin REFRIGERATOR CARE 1. Lift and hold open the translucent ice maker door. 2. Lift the wire shutoff arm so it clicks into the OFF (up) position. Release the ice maker door. Cleaning 3. Lift up the front of the storage bin and pull it out. WARNING Explosion Hazard Use nonflammable cleaner. 4. Replace the bin by pushing it in all the way, or the dispenser Failure to do so can result in death, explosion, or fire. will not work. 5. To restart ice production, l
Résumé du contenu de la page N° 9
Changing the Light Bulbs NOTE: Not all bulbs will fit your refrigerator. Be sure to replace 3. Remove light bulb and replace with one of the same size, the bulb with one of the same size, shape and wattage. On some shape and wattage. models, the dispenser light requires a heavy duty 10-watt bulb. 4. Replace light shield when applicable. All other lights require a 40-watt bulb. Replacement bulbs are 5. Plug in refrigerator or reconnect power. available from your dealer. 1. Unplug refrigerator
Résumé du contenu de la page N° 10
The doors are difficult to open There is interior moisture buildup NOTE: Some moisture buildup is normal. WARNING ■ Humid room? Contributes to moisture buildup. ■ Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed. Ice and Water Explosion Hazard The ice maker is not producing ice or not enough ice Use nonflammable cleaner. ■ Refrigerator connected to a water supply and the supply Failure to do so can result in death, e
Résumé du contenu de la page N° 11
The ice dispenser will not operate properly The water dispenser will not operate properly ■ Freezer door closed completely? Close the door firmly. If it ■ Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close does not close completely, see “The doors will not close completely.” completely.” ■ Ice bin installed correctly? Be sure the ice bin is firmly in ■ Refrigerator connected to a water supply and the supply position. shutoff v
Résumé du contenu de la page N° 12
WATER FILTER CERTIFICATIONS 12
Résumé du contenu de la page N° 13
PERFORMANCE DATA SHEETS Base Grille Water Filtration System Model T2WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters) Model T2WG2/T2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42
Résumé du contenu de la page N° 14
Base Grille Water Filtration System Model T1WG2L/T2RFWG2 Capacity 200 Gallons (757 Liters) Model T1WG2/T2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class II*; and against NSF/ANSI Standard 53 for the reduction of Mercury, Benzene, Toxaphene, O-dichlorobenzene, and Carbofuran. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reductio
Résumé du contenu de la page N° 15
Base Grille Water Filtration System Model P2WG2L/P2RFWG2 Capacity 200 Gallons (757 Liters) Model P2WG2/P2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I*; and against NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Benzene, Toxaphene, and O-dichlorobenzene. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of th
Résumé du contenu de la page N° 16
Base Grille Water Filtration System Model P1WG2L/P2RFWG2 Capacity 200 Gallons (757 Liters) Model P1WG2/P2RFWG2 Capacity 200 Gallons (757 Liters) System tested and certified by NSF International against NSF/ANSI Standard 42 for the reduction of Chlorine Taste and Odor, Particulate Class I*; and against NSF/ANSI Standard 53 for the reduction of Lead, Mercury, Benzene, Toxaphene, and O-dichlorobenzene. This system has been tested according to NSF/ANSI Standards 42 and 53 for the reduction of th
Résumé du contenu de la page N° 17
® MAYTAG MAJOR APPLIANCE WARRANTY LIMITED WARRANTY For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Maytag brand of Whirlpool Corporation or Whirlpool Canada LP (hereafter “Maytag”) will pay for factory specified parts and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be provided by a Maytag designated
Résumé du contenu de la page N° 18
INSTRUCCIONES PARA EL USUARIO DEL REFRIGERADOR LE AGRADECEMOS la compra de este producto de alta calidad. Si usted experimenta un problema que no se haya cubierto en SOLUCIÓN DE PROBLEMAS, visite nuestro sitio de internet en www.maytag.com para obtener información adicional. Si considera que aún necesita ayuda, llámenos al 1-800-688-9900. En Canadá, visite nuestro sitio de internet en www.maytag.ca o llámenos al 1-800-807-6777. Necesitará tener a mano su número de modelo y de serie ubicados
Résumé du contenu de la page N° 19
Antes de tirar su viejo refrigerador o congelador: Cómo deshacerse adecuadamente de su ■ Saque las puertas. refrigerador viejo ■ Deje los estantes en su lugar para que los niños no puedan meterse con facilidad. ADVERTENCIA Peligro de Asfixia Remueva las puertas de su refrigerador viejo. No seguir esta instrucción puede ocasionar la muerte o daño al cerebro. IMPORTANTE: El atrapamiento y asfixia de niños no es un problema del pasado. Los refrigeradores tirados y abandonados son un peligro, a
Résumé du contenu de la page N° 20
NOTAS: ■ No se recomienda instalar el refrigerador cerca de un horno, Requisitos del suministro de agua radiador u otra fuente de calor. No instale el refrigerador Reúna las herramientas y piezas necesarias antes de comenzar cerca de una ubicación en la que la temperatura puede bajar la instalación. Lea y siga las instrucciones provistas con de los 55°F (13°C). cualquiera de las herramientas enlistadas aquí. ■ El ancho mínimo normal necesario para el área de corte del HERRAMIENTAS NECESAR
