Instruction d'utilisation Harbor Freight Tools 90326

Résumé du contenu de la page N° 1

MOUNTABLE WALL SINK
90326
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2003 by Harbor Freight Tools . All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353

Résumé du contenu de la page N° 2

Specifications Overall Dimensions 34-1/4” W x 17-/58” Deep x 17” H Sink Capacity 10.5 Gallons Spout 10” H - 8” Overhang Weight 11.2 Lbs. Hose Fitting 3/4” Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference. Safet

Résumé du contenu de la page N° 3

10. Stay alert. Watch what you are doing, use common sense. Do not operate or assemble the Sink when you are tired. 11. Check for damaged parts. Before using any product, any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly r

Résumé du contenu de la page N° 4

Assembly FIGURE 1 (Overall view) FIGURE 2 Upper Drain Connection Pin Holes Water Inlet (Attach 3/4” Hose) (not included) Pipe (#8) Water Outlet (Attach 3/4” Hose) (not included) Elbow (#9) Elbow (#9) connects to Drain Set (#11) SKU 90326 Page 4

Résumé du contenu de la page N° 5

Assembly (continued) Note: When deciding where to mount the sink, make sure the wall can handle the FIGURE 3 weight of the sink and at least the weight of 10.5 gallons of water (8 Lbs. per gallon). We recommend mounting into wall studs. Plan the Sink to be located near the water source. Refer to FIGURES 1,2,3,4,5. 1. Attach the two Wall Supports (#3) to the Sink by meshing together the Pins on the Wall Supports (#3) next to the Pin Holes on underside of each side of the Sink.See FIGURE 2. On

Résumé du contenu de la page N° 6

Assembly (continued) 5. To install the Drain Set (#11):Set the Drain FIGURE 6 Ring into the hole in the Sink. Hold the Gasket and the Funnel under the Sink in positionunder the hole. Attach them with the screw. See FIGURES 2 and 6. Screw 6. Attach the Elbow (#9) to the Funnel with the Connector (#10). See FIGURE 6. 7. Attach the Pipe (#8) into the Elbow (#9) Drain Ring in the bottom, and the piece of pipe coming Gasket from the upper drain on the top. Funnel See FIGURES 2 and 6. FIGURE 7

Résumé du contenu de la page N° 7

Parts List and Assembly Drawing 1 7 8 2 Part No. Description Qty. 1 Mounting Bracket 4 9 2 Sink 1 3 Wall Support 2 3 4 Washboard 1 10 5Tray 1 6 Spout/Spout Connector 1 each 7 Hose Coupler 1 8 Pipe 1 11 9 Elbow 1 10 Connector 1 4 11 Drain Set 1 12 Inlet Coupler 1 5 6 12 6 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR DISTRIBU- TOR MAKES ANY REPRESENTATION OR WARRANTY OF