Résumé du contenu de la page N° 1
GARMENT STEAMER
EWGS1B
-HOUSEHOLD USE ONLY-
CAUTION:
BEFORE USE, PLEASE READ AND FOLLOW ALL IMPORTANT
SAFEGUARDS, PRECAUTIONS AND OPERATING INSTRUCTIONS.
1
Résumé du contenu de la page N° 2
Table of Contents Safety Instructions -------------------------------------------- 3-5 Parts and Features -------------------------------------------- 6 Assembling & Operating Instructions ------------------ 7-10 Cleaning and Maintenance --------------------------------- 10-11 Problem Solving ----------------------------------------------- 11-12 Warranty ---------------------------------------------------------- 13
Résumé du contenu de la page N° 3
What You Need to Know About Safety Instructions Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining, or operating appliance. Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand. When using electrical appliances, basic safety precaution sh
Résumé du contenu de la page N° 4
Return appliance to authorized service center for examination, repair or adjustment. 8) The use of attachments or accessories not recommended or sold by the manufacturer may result in fire, electric shock or injury. 9) Unplug the appliance from the outlet when not in use, assembling and disassembling, and before cleaning. Make sure the appliance cools down completely before assembling, disassembling and cleaning. 10) Do not let cord hang over edge of table or counter, or touch hot sur
Résumé du contenu de la page N° 5
25) If extended cord is absolutely necessary, a 13 ampere rated cord should be used. Cords rated for less amperage may over heat. Care should be taken to arrange the cord so that the cord cannot be pulled or tripped over. WARNING: To protect against electric shock, fire, and injury to persons, do not immerse main cord, plug or unit in water or any other liquid. WARNING: This product is equipped with a polarized plug (one blade is wider than the other blade) as a safety feature to r
Résumé du contenu de la page N° 6
Parts and Features 1. (A) Steam Nozzle Holder (B) Clothes Hanger Hook 2. Telescopic Pole 3. Steam Nozzle 4. Handle 5. Hose 6. Water Tank 7. Water Reservoir 8. Switch 9. Rolling Casters 10. Drain Plug 11. Hose Base 12. Pole Base 13. Indicating Lamps 14. Fabric Brush SPECIFICATIONS: • Power Rating: 1000 - 1200 Watts • Voltage Rating: 120V 60Hz • Steam Output Time: 45 Seconds • Unit Weight: 13 lbs 6
Résumé du contenu de la page N° 7
Before Your First Use Carefully unpack the garment steamer and remove all packaging materials. Select a flat, heat-resistant, non-flammable surface to place the food steamer. Do not immerse the product in water or other liquid. To remove any dust that may have accumulated on the removable parts during packaging, clean the surface with damp cloth and remove any stickers (except for any warning/caution stickers) Assembly Instructions 1. Put the clothes hanger hook onto the top telesco
Résumé du contenu de la page N° 8
CAUTION: Always hang the steam nozzle on the steam nozzle holder when not in use to prevent steam from causing bodily injury or damage to surfaces. WARNING: Do not pull the hose with excessive force or damage will occur and causing steam leakage. Do not move the appliance by grasping the hose. ACCESSORY ASSEMBLY To attach fabric brush onto the steam nozzle: Figure 4 1. Turn off the steamer and wait until no steam emits from the steam nozzle. 2. Align the pegs along the back of th
Résumé du contenu de la page N° 9
cavity. (See Figure 6) Do not let the steamer operate with a dry water tank, or the damage to the unit could occur. 3. Plug the unit into an outlet. 4. Turn on the switch. Verify that the light on the switch is illuminated. Steam should start flowing from the nozzle in approximately 45 seconds. 5. When finishing with the steaming session place the switch to the “OFF” position and remove the plug from the outlet. Figure 5 Figure 6 PRESSING WITH STEAM 1. To st
Résumé du contenu de la page N° 10
CAUTION: Be careful when handling garments on the clothes hanger hook. Pulling on the garment with too much force may cause the unit to tip. Cleaning and Maintenance COMPLETELY CLEAN AND DRY ALL PARTS AFTER EVERY USE. Be sure to unplug the appliance before cleaning. To protect against electrical shock, do not immerse cord, plug or unit in water or other liquid. Never use harsh abrasives, caustic cleaners on the interior surface. Wipe dry with clean cloth. For stubborn stains, u
Résumé du contenu de la page N° 11
REMOVING THE MINERAL BUILD-UP One common problem with steamer is mineral build-up caused by a high mineral in many municipal water suppliers. Mineral residue inside of the internal pipes and heater can cause intermittent steaming or, in some cases, no steaming at all. According to the water quality in different regions, it is advised to remove the mineral build-up after using 15-30 days. Please take a reference of the following procedures. The procedures below can be used to reduce mine
Résumé du contenu de la page N° 12
Excessive gurgling Condensation in hose. Some gurgling is a natural of Hose and Steam effect of the steam process. Nozzle. For excessive gurgling, extend the hose vertically to allow water to drain back into the Water Reservoir. Steam is Mineral build-up in the It’s normal for the unit to intermittent. unit. periodically stop steaming for a few seconds. If the steam stays off for longer periods, follow the Removing Mineral Build-up procedure. SAVE THESE INSTRUCT
Résumé du contenu de la page N° 13
Limited Warranty This Ewave product is warranted, to the original purchaser or gift recipient, to be free from any manufacturing defects under normal use and conditions for a period of one (1) year from the date of purchase as shown on retailer’s receipt. The obligation of MC Appliance under this warranty shall be limited to repair or replacement (at our option) during the warranty period, of any part that proves to be defective in material or workmanship under normal installation an
