Résumé du contenu de la page N° 1
MAS3
ZEKTOR
TM
Multi-channel Audio Switch
Owner’s Manual
www.zektor.com
Rev: 2 03/12/04
Résumé du contenu de la page N° 2
Important Safety Instructions! Read all instructions for prior to installation of your product. Retain this User's Manual for future reference. Adhere to all safety and operation instructions. Before cleaning this product, unplug from the wall outlet. Do not use liquid cleaning products. Use a damp cloth for cleaning. Do not use this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child, and serious damage to the product. Ensure that any attached
Résumé du contenu de la page N° 3
Résumé du contenu de la page N° 4
Using the MAS3 with a Remote Control Remote operations of the MAS3 are accomplished through the use of just about any remote control. A remote control is not supplied with the MAS3, yet the versatile programming modes of the MAS3 allows the MAS3 to work with virtually any remote control. The next section "Programming your Re- mote Control" on page 5, describes how to setup your remote controller. After your remote control is programmed the following describes the pre-programmed functions of t
Résumé du contenu de la page N° 5
Programming your Remote Control Setting up your Universal Remote Control For remote control operations, the MAS3 requires either a Universal Remote control to be pro- grammed as one of eight pre-programmed devices, or alternatively, the MAS3 can be taught to use most existing remote controls. The simplest way begin using the MAS3, is to program your Universal Remote control to act like a Symphonic TV. Once this is done you will be able to immediately start using your MAS3. Check your remote’s
Résumé du contenu de la page N° 6
Using Different Remote Codes Using Alternate Component Keys on your Remote The MAS3 will also respond to alternate component key codes. Allowing you to use an unused TV, VCR, RCVR or one of the added AUX positions many remotes include. Setting up the MAS3 to respond to alternate component codes is a two step process. You must first program your universal remote control to behave as one of the components in the following table. You must then teach the MAS3 to respond to the same set of alterna
Résumé du contenu de la page N° 7
STEP 1 1 Place the MAS3 in standby mode. This is the factory default mode ZEKTOR 1 2 3 on power up, and if it has not been changed, you can unplug the MAS3 and plug it back in and it will power up in standby mode (at this point only the power indicator light is lit and glowing RED). If the MAS3 does not power up in standby mode, follow the steps given in "Restoring the MAS3 to Factory Defaults" on page 13. STEP 2 2 On your remote control press the buttons in the following ZEKTOR 1 2 3 sequ
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
STEP 4 4 The Power indicator blinks slowly, and input 2 is selected. ZEKTOR 1 2 3 Press the key on your remote that you want to use as the new key for SELECTIN2. 1 BLINK STEP 5 5 The Power indicator blinks slowly, and input 3 is selected. ZEKTOR 1 2 3 Press the key on your remote that you want to use as the new key for SELECTIN3. 1 BLINK STEP 6 6 After a pause, the Power indicator blinks 2 times, and repeats. ZEKTOR 1 2 3 Press the key on your remote that you want to use as the new key for PO
Résumé du contenu de la page N° 10
STEP 11 11 After a pause, the Power indicator blinks 7 times, and repeats. ZEKTOR 1 2 3 Press the key on your remote that you want to use as the new key for POWEROFF. 7 BLINKS STEP 12 12 The MAS3 will return to the standby mode indicating a return to ZEKTOR 1 2 3 normal operations. The newly programmed codes will now operate your MAS3. Remote Control Learning Caveats Some component’s control codes will work better than others. We’ve designed the MAS3 to work with a great majority of codes, h
Résumé du contenu de la page N° 11
Bright / Dim / Auto-dimming Modes Setting the Display intensity modes of the MAS3 The front panel display of the MAS3 can be set to Bright, Dim or an Auto-dimming mode where the display brightens for 4 seconds after any function is selected and then auto-dims. Setting the mode is simply a matter of toggling between the three modes: • Bright Mode. When pressing the SETDIMMODE key to toggle to this state, the display will turn bright and remain that way. • Dim Mode. When pressing the SETDIMMODE
Résumé du contenu de la page N° 12
Setting Power On Defaults The MAS3 power on default mode When toggling between Standby mode and PowerOn the MAS3 will remember all it’s current set- tings. After completely powering down the MAS3 (by unplugging the AC wall adapter), upon restor- ing power (by plugging the AC wall adapter back in), it will power up in a user settable default mode. This is useful in situations where the MAS3 is externally switched by a power strip. The factory default settings for initial power on are: • Initial
Résumé du contenu de la page N° 13
Restoring the MAS3 to Factory Defaults Restoring the MAS3 to the factory defaults There are many ways to program the MAS3’s remote capabilities. Most learning modes require the MAS3 to be in standby mode before learning can begin. If the remote used to control the MAS3 were to be lost, and the MAS3 were programmed to power on during initial power up (as described in "Setting Power On Defaults" on page 12), there would be no way to reprogram the MAS3 to ac- cept new remote control codes. There
Résumé du contenu de la page N° 14
Résumé du contenu de la page N° 15
Warranty Information Warranty Policy ZEKTOR, LLC warrants this product against defects in material and workmanship under normal use and service for one year from the original date of purchase. ZEKTOR, at its option, shall repair or replace the defective unit covered by this warranty. In order to keep this warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying this warranty. This warranty does not cover any damage due to accident, misuse
Résumé du contenu de la page N° 16
Customer Service Contact Information: ZEKTOR, LLC 12675 Danielson Court Suite 401 Poway, CA 92064 Email: customerservice@zektor.com 16
