Résumé du contenu de la page N° 1
® ®
Intel Pentium 4 LGA775 / mPGA478
AMD K8(939/754) / K7
Installation Guide
GH-PDU21-MF
REV.1002
050318
Résumé du contenu de la page N° 2
Table of Content Checklist............................................................................................................3 Specification.......................................................................................................4 Feature..............................................................................................................4 Warranty Item.....................................................................................................5 Precautions
Résumé du contenu de la page N° 3
Checklist (1)GH-PDU21 -MF Cooler (6) Heat sink paste (2)LGA775 RM (3) P4 clips (4) K8 clip (5) K7 clip (7) Screw (9) Speed control (13) Double-sided (8) Fan control box (10) Power cable (11) PCI bracket (12) GH-PDU21-MF & 3.5” bracket adhesive strip user's manual (note1) The double-sided adhesive strip is to attach the fan control box to the chassis. - 3 - GH-PDU21-MF English
Résumé du contenu de la page N° 4
Specification Heat Sink Dimension : 110x110 x 109mm Fin Material : Al fin Heatpipe Number : 4 Rated Current : 0.1 ~ 0.5A Fan Speed : 1,700~3,200 rpm Airflow : 36.2 ~ 68.5 CFM Rated Voltage : 12V Life Expectancy : 50,000 hr Noise :21.3 ~ 40.1 dBA Total Weight : 430g Bearing Type: Ball Bearing Application : ® ® Intel Pentium 4 LGA775 840 / 670 / 570(3.8GHz) Base Maerial : Copper w/ Ni coating ® ® Intel Pentium 4 478 3.4GHz TM TM AMD Athlon FX55 / AMD Athlon XP 4000+ AMD K7 3200+ Feature ®
Résumé du contenu de la page N° 5
Precautions The cooler fan speed levels provided are for reference use only. Please refer to the motherboard BIOS to verify actual fan speed levels. Each connector on the fan control box is foolproof. Read the user’s manual before use. Before use, please remove the bottom protective layer of the cooler. Please make sure the computer is turned off and its power disconnected prior to installation. Warranty Item Incorrect method of operation or
Résumé du contenu de la page N° 6
Installation Instructions for Fan Control Box & Power Cable Connector for 3.5 Fan Speed controller Fan Control Box Power Cable connector Power connector for Cooler o r Connect the other end of the power Connect the other end of the power cable to the 3-pin CPU fan header cable to the 4-pin CPU fan header on the motherboard. on the motherboard. (LGA775) - 6 - GH-PDU21-MF English
Résumé du contenu de la page N° 7
Power Installation and 3.5” Fan Speed Controller Installation Figure 1 Securely hold the 3.5” fan speed controller bracket in place with the screws provided(Figure 1-1). Figure 1-1 Figure 1-2 Figure 2 Connect the cable connector of the 3.5" fan speed controller to the fan control box (Figure 2-1). Figure 2-1 Figure 3 Connect the power cable connector of the cooler to the fan control box (Figure 3-1). Figure 3-1 Figure 4 Assure that one end of the power cable included with the GH-PDU2
Résumé du contenu de la page N° 8
Power Installation and PCI Fan Speed Controller Installation Figure 1 Disassemble the turn knob, bolt and fan speed controller from the 3.5” bracket and reassemble these parts onto a PCI bracket in sequence. Figure 1-1 Figure 1-2 Figure 2 Place the PCI bracket with the fan speed controller in the selected PCI slot. Use screws to secure the PCI bracket in Figure 2-1 place. Figure 3 Repeat the steps in “Power Installation and 3.5” Fan Speed Controller Installation (Figure 2-1~Figure 4-2)”. Fi
Résumé du contenu de la page N° 9
Installation Instructions for P4 LGA775RM & Cooler To install GH-PDU21-MF on LGA775 motherboard needs both LGA775 RM & P4 clips. ARM Side A Please add an adequate layer of heat sink Side B paste on the surface of the CPU. CAM Figure 1 Place the LGA775RM onto the LGA775 motherboard so that side A is parallel with ARM and side B is parallel with CAM. Figure 1 Figure 2 From the underside of the motherboard, use screws (4) and plastic washers (4) together to secure the LGA775RM into place.. Plasti
Résumé du contenu de la page N° 10
® ® Installation Instructions for Intel Pentium 4 mPGA478 Clips Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU(Figure1-1). Figure 1-2 showing the correct installation of the cooler atop the CPU. Figure 1-2 Figure 1-1 Figure 2 C Clip introduction-- B A Part A: Secured to the retention mechanism hook. Part B: Tightly contact the cooler bracket. Figure 2 Part C: Secured to the retention mechanism hook. Figure 3 Secure Parts A, B, and then C of the clip t
Résumé du contenu de la page N° 11
Installation Instructions for AMD K8 (939 / 754) Clip Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU. Figure 1-1 Figure 1-2 Figure 2 Figure showing the correct installation of the cooler atop the CPU. Figure 2 Figure 3 Align the three insert spaces of the clip with the three juts on the CPU socket and then push firmly downwards to hold the clip in space. Figure 3 Figure 4 Push the lever on the side of the cooler towards the lever position on the base o
Résumé du contenu de la page N° 12
Installation Instructions for AMD K7 Clip Figure 1 Please add an adequate layer of heat sink paste on the surface of the CPU. Remove the bracket of the cooler along the direction of the arrow (Figure 1-2). The bracket should Figure 1-1 Figure 1-2 Figure 1-3 be removed as that shown in Figure 1-3. A B Figure 2 Place point A of the clip (Figure2-1)on point B at the bottom of the cooler(Figure2-2).As Figure 2-3. Figure 2-1 Figure 2-2 Figure 2-3 Figure 3 Align the three spaces on the co
Résumé du contenu de la page N° 13
® ® Intel Pentium 4 LGA775 / mPGA478 AMD K8 (939 / 754) / K7 GH-PDU21-MF
Résumé du contenu de la page N° 14
.......................................................................................................15 .......................................................................................................16 .......................................................................................................16 .......................................................................................................17 ............................................................................
Résumé du contenu de la page N° 15
(1) GH-PDU21-MF (6) (7) (2) LGA775 (3) P4 (4) K8 (5) K7 (9) 3.5 (8) (10) (11)PCI (12) GH-PDU21-MF (13) ( 1) - 15 - GH-PDU21-MF
Résumé du contenu de la page N° 16
: 110 x 110 x 109 mm : 0.1~ 0.5 : 4 : 36.2 ~ 68.5 CFM : 1,700 ~ 3,200 rpm : 50,000 hr : 12V : 430g : 21.3 ~40.1 dBA : ® ® : Ball Bearing Intel Pentium 4 LGA775 840 / 670 / 570(3.8GHz) ® ® Intel Pentium 4 478 3.4GHz : TM TM AMD Athlon FX55 / AMD Athlon XP 4000+ : Aluminum AMD K7 3200+ P4 LGA775 P4 mPGA478 AMDK8(939 / 754) AMDK7 4 (1,700~3,200 rpm) 3.5 PCI LED - 16 - GH-PDU21-MF
Résumé du contenu de la page N° 17
BIOS - 17 - GH-PDU21-MF
Résumé du contenu de la page N° 18
3.5 3 pin CPU fan 4 pin CPU fan (LGA775) - 18 - GH-PDU21-MF
Résumé du contenu de la page N° 19
3.5 1 3.5 ( 1-2) 1-1 1-2 2 3.5 ( 2-1) 2-1 3 3-1 ( 3-1) 4 GH-PDU21-MF CPU fan ( 4-1) ( 4-2) 4-1 4-2 - 19 - GH-PDU21-MF
Résumé du contenu de la page N° 20
PCI 1 3.5 ( 1-1) PCI ( 1-2) 1-1 1-2 2 PCI 2-1 PCI ( 2-1) 3 3.5 ( 2-1~ 4-2) 3-1 3-1 - 20 - GH-PDU21-MF
