Instruction d'utilisation Renesas 7542

Résumé du contenu de la page N° 1

Renesas Starter Kit for 7542
Quick Start



LCD module


E8a header

Application Board Interface

Reset switch
LCD module
connector


Application Board Interface
E8a emulator

User LEDs
Analog adjust


User switches

Voltage Conversion Board
(for QzROM microcontroller)




D007294_11_S01_V03

Résumé du contenu de la page N° 2

1. Installation Do not connect the E8a emulator hardware until the software support has been installed. 1. Insert the CD into your computer’s CD-ROM drive. The CD should automatically run the installation program. If the installer does not start, browse to the CD root folder and double click on “setup.exe”. 2. The installer will ask you which language is to be used, please choose the appropriate one. 3. On the first screen of the installer proper, click . 4. The License Agreement w

Résumé du contenu de la page N° 3

25. On the Project Generator Information window: Click . The project that is created has two configurations. The Release configuration can be used for the final release code version. The Debug configuration allows modifications to the configuration for debugging. 26. Select the Debug build configuration in the left hand drop down list on the toolbar. 27. Click on the “Build” icon to compile, assemble and link the project. 4. Programming and Debug 28. Ensure the “Session740_E8a

Résumé du contenu de la page N° 4

35. Right click on the download module listed in the left hand pane and select “Download”. The code will be downloaded to the microcontroller. This may take several seconds. 36. Click the button. The code will run and you will see the LEDs flash on the board. 37. Click the button. The code will stop and the source code will be opened at the current program counter. 5. Next Step After you have completed this quick start procedure, please review the tutorial