Résumé du contenu de la page N° 1
Table of Contents
Certifications…………………………………………………………….. 2
Warning and Caution…………………………………………………… 3
Installation of Monitor…………………………………………………… 4
Using OSD…..…………………………………………………………... 8
Green and P&P…………………………………………………………. 10
Trouble shooting………………………………………………………… 10
Appendix A—Specifications……………………………………………. 13
Appendix B—Factory mode…………………………………………… 14
Appendix C—Pin assignment…………………………………………. 14
Appendix D—Dimension………………………………………………. 14
Notice
Résumé du contenu de la page N° 2
FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may ca
Résumé du contenu de la page N° 3
Notice: 1. The changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference. WARNING AND CAUTION 1 ． STOP OPERATING THE MONITOR WHEN YOU SENSE TROUBLE 。 Please unplug the monitor immediately if you notice
Résumé du contenu de la page N° 4
8 ． CLEANING YOUR MONITOR Do not use alcohol, ammonia based liquid, benzene, or corrosive cleanser to clean the monitor, they may damage the cabinet or CRT’s surface. You may use soft, clouding cloth to clean the monitor careful. Notice, you must unplug the monitor before cleaning it. 9 ． CARING YOUR MONITOR Unplug the monitor when not use it for a long time. You should take the cables in hands when lifting the monitor, or you may trip up by them and dropped the monitor. PACKAGE There
Résumé du contenu de la page N° 5
POWER CORD ： 1. The monitor may work at 100---120VAC or 200---240V AC area. (No user adjustment is required.) 2. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet. Connecting the Video Cable: the monitor comes with a built-in video cable. Plug the signal cable’s 15-pin connector into the computer’s video port and tighten the two screws on the cable connector. (See figure 2) Caution: Don’t bend the signal cable, o
Résumé du contenu de la page N° 6
SETUP General Instructions The power switch and other control knobs are located at front panel of the monitor (See Figure 3). Press the power switch to turn the monitor on or off. By changing other control knobs settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • To turn the monitor on, press the POWER switch to ON position. The power indicator will light up. • Your mo
Résumé du contenu de la page N° 7
Front Panel Control • POWER / Power Indicator: Press this knob to switch ON/OFF of monitor’s power and display the monitor’s state. Green — Power On mode. Orange — Off mode. • MENU : Active OSD menu or function adjust confirm. • CONTRAST / : Adjust contrast or function adjust. • BRIGHTNESS / : Adjust brightness or function adjust. • EXIT : Exit a function or inactive OSD menu, If OSD not shown on the screen, Press this knob to display the monitor’s state. • BRIGHT MODE
Résumé du contenu de la page N° 8
How to adjust a setting The monitor controls are accessed by pressing button MENU to enable OSD (On-Screen-Display). The main menu will be displayed as follows (see figure 5), press the or to choose the next window. Choose the English, then press MENU Key for confirming. OSD window will display in English. 1024X768 68K 85Hz Figure 5 English OSD Message Adjusting the picture The description for functional control icons 1. SIZE & POSITION ： 1.1 HORIZONTAL POSITION ： A
Résumé du contenu de la page N° 9
2. GEOMETRY ： 2.1 ROTATION ： Adjust the picture tilt to horizontal position. 2.2 PINCUSHION ： Adjust the pincushion and barrel. 2.3 BALANCED PINCUSHION ： Adjust to compensate the pincushion unbalance. 2.4 TRAPEZOID ： Adjust the picture’s trapezoid distortion. 2.5 PARALLELOGRAM ： Adjust the picture to be a rectangle. 3. MOIRE ： Moire is the result of interference between the phosphor layout and the video signal. In some cases, you may find the moi
Résumé du contenu de la page N° 10
Green monitor • The monitor has a power saving function that conforms to the VESA DPMS standardThis feature will maximize to decrease power consumption of the monitor. • Power saving will be found via indicator: Signal Power Mode Signal H-Sync V-Sync Video Indicator Consumption On Yes Yes Green Attached Active < 75W Off mode No No Orange Attached Blank < 2W PLUG & PLAY DDC2B feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It all
Résumé du contenu de la page N° 11
3 ．Poor Focus Do not place signal cable between monitor and computer. Verify the current mode is primary mode or not with user manual. Adjust OSD to decrease the value of item “ moire ”. Perform degauss. Decrease brightness and contrast. Decrease video resolution. 4 ．Shaky / Jittery Video Set the computer to primary mode. Check the signal cable for bent or broken pins. If connecting UPS, removing UPS and plug monitor to wall outlet. Away from the speakers, fans, neon lights,
Résumé du contenu de la page N° 12
9 ．Brightness It indicates too bright or dim. Adjust brightness. If OSD has the same problem, it indicates the monitor cause it, or the problem come from display adapter. Check signal cable for bent or broken pins. 10 ．Geometric distortion Geometric distortion refers to where the shape of the image is distorted in any way, such as trapezoid, linearity, line straightness, tilt, pincushion, picture size and centering etc. Check signal cable for bent or broken pins. Adjust OSD to fix
Résumé du contenu de la page N° 13
APPENDIX A – SPECIFICATIONS CRT 43cm / 17" ( 40cm/16.0” viewing ) High and bright angle of pure flat surface, 0.25mm dot pitch, non-glare, anti-static, anti-reflection coating • Video • Analog R, G, B 0.7Vpp positive/75 ohm • Sync. • Horizontal sync. : Positive/Negative • Vertical sync. : Positive/Negative Synchronization • Horizontal 30kHz to 69kHz automatically • Vertical 50Hz to 130Hz automatically Max. Resolution 1280 × 1024 Recommended Res. 1024*768@85Hz Full screen bright
Résumé du contenu de la page N° 14
APPENDIX B - FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL STANDARD RESOLUTION FREQUENCY FREQUENCY Dos-Mode 720 × 400 31.5kHz 70Hz VGA 640 × 480 31.5kHz 60Hz VESA/75 640 × 480 37.5kHz 75Hz VESA/85 640 × 480 43.3kHz 85Hz VESA/75 800 × 600 46.8kHz 75Hz VESA/85 800 × 600 53.6kHz 85Hz VESA/75 1024 × 768 60.0kHz 75Hz VESA/85 1024 × 768 68.7kHz 85Hz VESA/60 1280 × 1024 64.0kHz 60Hz APPENDIX C - Pin Assignment D-SUB PIN INPUT PIN OUTPUT RED NO CONNECT
