Résumé du contenu de la page N° 1
VP201b LCD Display
VP201s
User Guide
Guide de l’utilisateur
Bedienungsanleitung
Guía del usuario
Guida dell'utente
Guia do usuário
Användarhandbok
Käyttöopas
Használati útmutató
Podr cznik u ytkownika
Uživatelská píruka
Full 20.1" Diagonal Viewable Screen
Résumé du contenu de la page N° 2
Contents Product Registration............................................. 2 For Your Records ................................................. 2 Getting Started Package Contents................................................ 3 Precautions .......................................................... 3 Quick Installation.................................................. 4 Landscape/Portrait Modes ................................... 5 To Raise and Lower the display ...........................5 Inst
Résumé du contenu de la page N° 3
Copyright © ViewSonic Corporation, 2004. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association. DPMS and D
Résumé du contenu de la page N° 4
Getting Started ® Congratulations on your purchase of a ViewSonic LCD display. Important! Save the original box and all packing material for future shipping needs. NOTE: The word “Windows” in this user guide refers to the following Microsoft operating systems: Windows ‘95, Windows NT, Windows ‘98, Windows 2000, Windows Me (Millennium), and Windows XP. Package Contents Your LCD display package includes: LCD display Power cord Video cables (VGA and DVI) USB cable ViewSonicWizard CD-
Résumé du contenu de la page N° 5
Quick Installation 1 Connect power cord 4 Wizard CD (continued) (1) Wait for the CD-ROM to auto-start. 2 Connect video cable NOTE: If the CD-ROM does not auto-start: • Make sure both the LCD display double-click on the CD-ROM icon in the and computer are turned OFF Windows Explorer, then double-click on • Remove rear panel covers if necessary viewsonic.exe. • Connect the video cable from the LCD (2) Follow the on-screen instructions. display to the computer Macintosh users: Models older tha
Résumé du contenu de la page N° 6
Landscape/Portrait Modes The LCD display can operate in either Landscape or Portrait mode. Follow the instructions that accompany the Perfect Portrait software. Note: Before using the portrait display mode, first install the Perfect TM Portrait software included with your LCD display. Perfect Portrait software is compatible with most PCI and AGP graphics (video) cards. For information about compatible graphics cards and approved hardware configurations, go to the ViewSonic website, ht
Résumé du contenu de la page N° 7
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your LCD display from a desk-mounted to a wall-mounted display, do the following: 1 Disconnect Power. 2 Lay the LCD display face down on a towel or blanket. 3 Pull the back plate away from the head of the LCD display. Let the plate hang on the neck of the LCD display as shown on the left. Notice the four
Résumé du contenu de la page N° 8
Using the LCD Display Setting the Timing Mode Setting the timing mode is important for maximizing the quality of the screen image and minimizing eye strain. The timing mode consists of the resolution (example 1600 x 1200) and refresh rate (or vertical frequency; ® example 60 Hz). After setting the timing mode, use the OnView controls to adjust the screen image. For the best picture quality set your LCD display timing mode to: VESA 1600 x 1200 @ 60Hz. To set the Timing Mode: 1 Set the resol
Résumé du contenu de la page N° 9
Adjusting the Screen Image ® Use the buttons on the front control panel to display and adjust the OnView controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in "Main Menu Controls" on page 9. Main Menu with OnView controls Front Control Panel shown below in detail Scrolls through menu options and adjusts the displayed control. Also a shortcut to display the Contrast adjustment control screen. Displays the control screen for t
Résumé du contenu de la page N° 10
Do the following to adjust the screen image: 1 To display the Main Menu, press button [1]. NOTE: All OnView menus and adjustment screens disappear automatically after about 30 seconds. 2 To select a control you want to adjust, press or to scroll up or down the Main Menu. 3 After the control is selected, press button [2]. 4 To adjust the control, press the up or down buttons. 5 To save the adjustments and exit the menu, press button [1] twice. The following tips may help you optimize
Résumé du contenu de la page N° 11
Main Menu Controls Adjust the menu items shown below by using the up and down buttons. Control Explanation Auto Image Adjust automatically sizes, centers, and fine tunes the video signal to eliminate waviness and distortion. Press the [2] button to obtain a sharper image. NOTE: Auto Image Adjust works with most common video cards. If this function does not work on your LCD display, then lower the video refresh rate to 60 Hz and set the resolution to its pre-set value. Contrast adjust
Résumé du contenu de la page N° 12
Control Explanation 5400K Adds green to the screen image for a darker color. 5000K Adds blue and green to the screen image for a darker color. User Color Individual adjustments for red (R), green (G), and blue (B). 1 To select color (R, G or B) press button [2]. 2 To adjust selected color, press or . Important: If you select RECALL from the Main Menu when the product is set to a Preset Timing Mode, colors return to the 6500K factory preset. Information displays the timing mode
Résumé du contenu de la page N° 13
Control Explanation Scaling adjusts the video input signal to the screen size other than 1600 x 1200 using the following options. 1:1 adjusts the video signal so that the height and width of the picture are the same. Fill all adjusts the video signal to fill the screen. Fill Aspect Ratio maintains the correct video signal proportions for different resolutions. Setup Menu displays the menu shown below. The Setup Menu controls are explained below: allows you to choose the language used in t
Résumé du contenu de la page N° 14
Control Explanation OSD Position allows you to move the on-screen display menus and control screens. OSD Timeout sets the length of time an on-screen display screen is displayed. For example, with a "15 second" setting, if a control is not pushed within 15 seconds, the display screen disappears. OSD Background allows you to turn the On-Screen-Display background on or off. OSD Pivot This function is used to rotate the OSD menu, when the display is changed from Landscape to Portrait mode. re
Résumé du contenu de la page N° 15
Other Information Specifications Type 20.1" (full 20.1" viewable diagonal area), LCD TFT (Thin Film Transistor), Active Matrix UXGA LCD, 0.255 mm pixel pitch Color Filter RGB vertical stripe Glass surface Anti-Glare Analog RGB analog (0.7/1.0 Vp-p, 75 ohms) Input signal Composite Sync, Separate Sync, Sync on Green f :30-92 kHz, f :30-85 Hz h v Digital TMDS f :30-92 kHz, f :30-85 Hz h v PC Up to 1600 x 1200 Non-interlaced Compatibility 1 Power Macintosh up to 1280 x 1024 Macintosh Recommended
Résumé du contenu de la page N° 16
Troubleshooting No power • Make sure power button (or switch) is ON. • Make sure A/C power cord is securely connected to the LCD display. • Plug another electrical device (like a radio) into the power outlet to verify that the outlet is supplying proper voltage. Power is ON but no screen image • Make sure the video cable supplied with the LCD display is tightly secured to the video output port on the back of the computer. If the other end of the video cable is not attached permanently to the
Résumé du contenu de la page N° 17
Customer Support For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number. Country/ Web site T = Telephone Email Region F = FAX www.viewsonic.com/ United States T: (800) 688-6688 service.us@ support F: (909) 468-1202 viewsonic.com Canada www.viewsonic.com/ T: (800) 688-6688 service.ca@ support F: (909) 468-1202 viewsonic.com United Kingdom www.viewsoniceurope.com T: 0800 833 648 service.eu@ F: (01293) 643910 viewsonice
Résumé du contenu de la page N° 18
Cleaning the LCD Display • MAKE SURE THE LCD DISPLAY IS TURNED OFF. • NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE. To clean the screen: 1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2 If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1 Use a soft, dry cloth. 2 If still not clean, apply a small amount of a non
Résumé du contenu de la page N° 19
Limited Warranty VIEWSONIC LCD DISPLAY What the warranty covers: ® ViewSonic warrants its products to be free from defects in material and workmanship during the warranty period. If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components. How long the warranty is effective: ViewSonic LC
Résumé du contenu de la page N° 20
Appendix Safety Guidelines CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA.................UL Switzerland ..... SEV Canada.............CSA Britain ............. BASE/BS Germany..........VDE Japan ............... Electric Appliance Control Act IMPORTANT NOTICE CONCERNING POWER
