ページ1に含まれる内容の要旨
43-935.fm Page 1 Friday, January 14, 2000 3:07 PM
Cat. No. 43-935
OWNER’S MANUAL
Please read before using this equipment.
Two-Line Caller ID Phone
With Speakerphone
ページ2に含まれる内容の要旨
43-935.fm Page 2 Friday, January 14, 2000 3:07 PM FEATURES Your RadioShack Two-Line Caller ID Two Telephone Lines — allows you to Phone offers the latest in telephone select which line you prefer. technology, combining Caller ID fea- tures, two telephone lines, and speaker- Caller ID Memory Dial — lets you se- phone all in one easy-to-use telephone. lect a stored phone number from Caller ID memory, then dial it with the touch of The system displays a caller’s phone a button. number (and name,
ページ3に含まれる内容の要旨
43-935.fm Page 3 Friday, January 14, 2000 3:07 PM Your phone is ETL listed to UL stan- Important Caller ID Information dards and meets all applicable FCC standards. To use the phone’s Caller ID and Mes- sage Waiting features you must be in an area where those services are available WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain and you must subscribe to those servic- or moisture. es through your local phone company. Where Caller ID is offered, one or m
ページ4に含まれる内容の要旨
43-935.fm Page 4 Friday, January 14, 2000 3:07 PM FCC STATEMENT IMPORTANT SAFETY INSTRUCTIONS This telephone complies with Part 68 of FCC Rules. You must, upon request, SAVE THESE INSTRUCTIONS — To provide the FCC Registration Number reduce the risk of fire, electric shock and the REN to your phone company. and/or injury, always follow these basic These numbers are located on the bot- safety precautions when using your tele- tom of your phone. phone equipment. Note: You must not connect your
ページ5に含まれる内容の要旨
43-935.fm Page 5 Friday, January 14, 2000 3:07 PM 7. Never push objects of any kind 13. Never install jacks in a wet location through slots in the phone. You unless the jack is specifically de- could touch dangerous voltage signed for wet locations. points or short out parts that could 14. Never touch uninsulated telephone result in a risk of fire or electric wires or terminals unless the tele- shock. Never spill liquid of any kind phone line has been disconnected on the telephone. at the net
ページ6に含まれる内容の要旨
43-935.fm Page 6 Friday, January 14, 2000 3:07 PM 4. Exercise care in handling batteries 11. Do not store this product, or the bat- in order not to short the battery with teries provided with or identified for conducting materials such as rings, use with this product, in high-tem- bracelets and keys. The battery or perature areas. Batteries that are conductor may overheat and cause stored in a freezer or refrigerator for burns. the purpose of extending shelf life should be protected from cond
ページ7に含まれる内容の要旨
43-935.fm Page 7 Friday, January 14, 2000 3:07 PM CONTENTS Preparation ...................................................................................................................................... 8 Installing Batteries ..................................................................................................................... 8 Selecting a Location .................................................................................................................. 9 Mounting t
ページ8に含まれる内容の要旨
43-935.fm Page 8 Friday, January 14, 2000 3:07 PM PREPARATION Caution: If you do not plan to use the INSTALLING BATTERIES the phone for a month or more, remove the batteries. Batteries can leak chemi- Your phone requires two AA batteries cals that can destroy electronic parts. (not supplied) for power. For the best performance and longest life, we recom- Notes: mend RadioShack alkaline batteries. • If you replace the batteries, have Note: The batteries protect the phone’s fresh batteries on h
ページ9に含まれる内容の要旨
43-935.fm Page 9 Friday, January 14, 2000 3:07 PM SELECTING A LOCATION MOUNTING THE SYSTEM You can place the phone on a desk top Attaching the Stand or table, or mount it on a standard wall plate. Select a location that is: To mount the phone on a wall or desk top, you need to attach the supplied • near an accessible AC outlet stand to the phone. • near a telephone line jack To place the phone on a desk top, insert • out of the way of normal activities the tab on the narrow end of the stand •
ページ10に含まれる内容の要旨
43-935.fm Page 10 Friday, January 14, 2000 3:07 PM 4. Align the base’s keyhole slots with On a Desk Top the wall plate studs and slide the Follow these steps to mount the system base downward to secure it. on a desktop. 5. Press and lift out the handset hold- 1. Plug one end of the supplied long er. Rotate it 180°, then snap it back modular cord into the TEL LINE jack into place so it holds the handset. on the back of the phone. 2. Plug the other end of the modular cord into a modular phone j
ページ11に含まれる内容の要旨
LO MED HI TONE PULSE RESET 3 D0 C 0 m 9V A TEL. LINE 43-935.fm Page 11 Friday, January 14, 2000 3:07 PM 5. Press and lift out the handset hold- Cautions: er. Rotate it 180°, then snap it back You must use a Class 2 into place so it holds the handset. power source that supplies ! 9V DC and delivers at least 300 mA. Its center tip must be set to CONNECTING THE negative and its plug must fit the HANDSET phone's DC 9V jack. The supplied adapter meets these specifications. 1. Plug one end of the
ページ12に含まれる内容の要旨
43-935.fm Page 12 Friday, January 14, 2000 3:07 PM only after you pick up the hand- DISABLING THE LINE 2 set. INDICATOR 4. When you finish adjusting the con- If you have only one telephone line, the trast, press DELETE to return to the LINE 2 indicator lights and LINE 2 EX- main display. TENSION appears on the display. Follow these steps to disable the LINE 2 indica- tor. SETTING THE RINGER 1. Press REVIEW 8 or 9 repeatedly VOLUME until the call total appears. To set the ringer’s volume for
ページ13に含まれる内容の要旨
43-935.fm Page 13 Friday, January 14, 2000 3:07 PM 3. When you hear the dial tone, press place the batteries with fresh ones, any number other than 0. then reconnect it and try initializing it again. Note: If your phone system requires that you dial an access code (9, for example) before you dial an outside number, do not press the access code number. • If the dial tone stops, you have touch-tone service. Leave TONE/ PULSE set to TONE. • If the dial tone continues, you have pulse service. Set
ページ14に含まれる内容の要旨
43-935.fm Page 14 Friday, January 14, 2000 3:07 PM OPERATION tone. PLEASE DIAL and## /,1(4 or MAKING AND RECEIVING /,1(5 appear on the display accord- CALLS ing to the line in use. The SPEAK- ERPHONE and LINE 1 or LINE 2 To make a call using the handset, pick it indicators light. up. When you hear the dial tone, dial the number. Then current time disappears, 3. Adjust VOLUME to a comfortable lis- and the number appears on the display tening level. as you dial it. When you complete the 4. Dia
ページ15に含まれる内容の要旨
43-935.fm Page 15 Friday, January 14, 2000 3:07 PM To switch from the speakerphone to the Notes: handset, simply pick up the handset. • If you do not have any special phone services, pressing FLASH might disconnect the current call. New Call Indicator •Pressing FLASH does not hang up The NEW CALL indicator blinks if the the system. system has either voice mail or a new • You can store a FLASH entry when call in call memory. The NEW CALL in- you store a number in memory. dicator stops blinking
ページ16に含まれる内容の要旨
43-935.fm Page 16 Friday, January 14, 2000 3:07 PM Ringer Indicators IDENTIFYING THE INDICATORS To indicate which line has an incoming call, Line 2 has a higher sounding ring Your phone has line status indicators than Line 1. that use ringing tones, the display, and indicator lights to let you know if a call is coming in, on hold, or a line is in use. Display and Light Indicators Display Information Light Indicator Situation LINE 1 RINGING LINE 1 blinks. Line 1 is ringing. LINE 2 RINGING LI
ページ17に含まれる内容の要旨
43-935.fm Page 17 Friday, January 14, 2000 3:07 PM USING CALLER ID Display Situation Appears if there are one If you subscribe to a Caller ID service, or more incoming new the phone automatically displays infor- X calls saved in memory. mation about calls you receive and X indicates the number stores the information in Caller ID mem- of new calls. ory. The system can store up to 99 in- Appears when there are coming phone numbers, or up to 68 a total of XX Caller ID XX CALLS incoming nam
ページ18に含まれる内容の要旨
43-935.fm Page 18 Friday, January 14, 2000 3:07 PM Display Situation Display Situation Appears if the Caller ID Appears if the caller is information was gar- not within a Caller ID bled. It is normal for this service area, or during to happen occasionally. the following types of in- ERROR If this happens often, coming calls: contact your local • Long-distance calls phone company and (except when the ask them to correct the long-distance UNKNOWN problem. phone company NUMBER/ used for t
ページ19に含まれる内容の要旨
43-935.fm Page 19 Friday, January 14, 2000 3:07 PM • If a displayed phone number is more 2. Press CALL BACK. AREA CODE NO. than twelve characters, the rest of 1 appears. the Caller ID information scrolls au- 3. Press REVIEW 8 or 9 to review tomatically. the area codes which you stored previously. Area Code 4. Press STORE to exit. Your phone allows you to pre-store five Follows these steps to delete stored area codes of three digits. When you area codes. dial a Caller ID number by pressing the
ページ20に含まれる内容の要旨
43-935.fm Page 20 Friday, January 14, 2000 3:07 PM If the Caller ID record has the same Note: If you do not press any button area code as one you have stored within 30 seconds while deleting call but you need to include the area records, the phone automatically returns code to make the call, dial the area to the current time display. code on the number key pad then press CALL BACK. Storing Call Records Into If the Caller ID record has a different Memory Locations area code than one you have
