ページ1に含まれる内容の要旨
English
Contents
Installation
Preparation ________________________________________________3
Switch TV on ______________________________________________4
Select your Menu language____________________________________4
Search for and Store TV channels
Automatic installation ___________________________________5
Manual installation ______________________________________6
Reshuffle the programme list _________________________________8
Select favourite TV channels __________________________________9
In
ページ2に含まれる内容の要旨
B B Your remote control TV VCR 1 TUNER p.33 a selection of EXT1, VCR 2 TAPE a SAT DCC EXT2, EXT3 or FRONT. AMP CD M selection of connected M p.11 peripheral equipment B switch to standby B TV TV operation TV Menu p.11 MENU OK MENU menu on/off B p.11 B select your choice p.11 a volume key K K 0 TV-channel selection OK activate your choice c sound temporarily a 0 L L switched off c E 1 23 p.21 E vertical squeeze e bilingual choice p. 28 e c continuous subtitles 456 c 789 Teletext a J 2 p.26 a
ページ3に含まれる内容の要旨
B Installation Preparation Place the TV on a solid surface. For ventilation, leave a space of at least 5 cm free all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Insert the aerial plug tightly into the aerial socket g at the back of the TV with an aerial cable of good quality. CABLE 4 Check if the loudspeaker switch at the back of the TV is in the l position. Insert the mains plug in the wall socket with a mains voltage of 220V-24
ページ4に含まれる内容の要旨
B Switch TV on 4 Press the power switch A on the front of your set. 5 A green or red lamp lights up on the front of your set. green ................................................... or red ..................................................................... 5 The TV is switched on. 5 The TV is switched on but the screen stays The screen lights up after a few moments. dark. Your TV is on standby. 4 Press a digit key on the remote control. 5 The TV switches on. The screen lights up. 5 The green
ページ5に含まれる内容の要旨
Store TV channels This can be done in two different ways : automatically or manually. Automatic installation ........................ or Manual installation All TV channels are searched for and With manual installation it is possible to stored automatically. As far as it is select whether TV channels are searched transmitted by the cable company or a TV for by frequency or channel number. channel a programme number and a name is attributed automatically as well and filled Follow very closely and
ページ6に含まれる内容の要旨
B Manual installation 4 Select Manual Installation with the keys V or W and press OK. 5 The menu MANUAL INSTALLATION appears. ....... ....... 05 10 In the left upper corner of the screen a programme number, a system, ....... 16 11 a frequency or possibly a channel number are displayed. 27 12 5 Selection Mode is only present and lights up if the country you selected in 38 13 4 9 ... the COUNTRY menu also offers the channel option. In this case you can choose either channel or frequency mode. Se
ページ7に含まれる内容の要旨
B Direct selection of a TV channel TV If you know the frequency, or the C- or S-channel number, it can be entered VCR 1 TUNER VCR 2 TAPE directly with the digit keys on the remote control and in this way call up the a SAT DCC AMP CD TV channel. M Ask for a list from your cable company or dealer, alternatively consult the B TV Table of frequencies on the inside backcover of this handbook. MENU OK 4 Select Search with the keys V or W. B 4 Enter the 3 digits of the desired frequency or the 2 digits
ページ8に含まれる内容の要旨
B Enter or modify a programme name It is possible to change the name stored in the memory or to assign a name to a TV channel which has not yet been entered. A name with a maximum of 5 letters or numbers can be given to the programme numbers 0 to 99. For example SUPER, BBC1,... Between 99 and 0, you can also name any peripherals that are connected. 4 Select Give Name with the keys V or W and press OK. 5 The GIVE NAME menu appears. 90 EXT1 0 GIVE NAME 91 EXT2 1 BBC1 4 Select the TV channel to be
ページ9に含まれる内容の要旨
B Select Favourite TV channels During the installation all the stored TV channels have automatically been placed into the favourite list. This will make selection of only your favourite TV channels a lot easier and faster. In the Favourite Programmes menu you can indicate for each TV channel if you TV VCR 1 TUNER want to keep that TV channel as a favourite. VCR 2 TAPE a SAT DCC You can also do this for a programme number reserved for the programmes AMP CD M you receive from your decoder. TV B Af
ページ10に含まれる内容の要旨
B Install TV Configuration Different options can be selected depending on the different peripheral equipment you may have connected to your TV. Audio Output TV CONFIG. 4 Select TV Configuration with the keys V or W and press OK. Ext2 Output 5 The TV CONFIG. menu appears and Audio Output lights up. CD-i/Photo CD Information Line Audio Output If you have audio equipment or another external sound source connected to your TV, you can select two types of audio output. 4 Select Variable with the keys
ページ11に含まれる内容の要旨
B Operation To be operational with the remote control Every time you press a key on the remote your TV should be in the TV operation control, a green lamp on the front of your position. TV set blinks. If this is not the case, first press the TV key left of the display. The letters TV in the display of the remote control appear in a black block for a few seconds. Switch TV on 4 Press A on the front of your TV. 5 A green lamp lights up and the programme appears. 5 Does a red lamp light up ? Your T
ページ12に含まれる内容の要旨
Main Menu Select the picture settings During manufacture four types of picture setting have been pre-defined. You can choose among these four different settings with the PICTURE key of SMART CONTROLS the smart controls on the door of the remote control. PICTURE SOUND 4 Press the Smart Controls' key PICTURE repeatedly to select : Soft, Natural, Rich or Personal. 5 The picture setting possibilities are displayed briefly on top of the screen. The picture settings correspond with a specific predefi
ページ13に含まれる内容の要旨
B If you want to store the modified adjustments for Contrast, Brightness, Colour, Tint and Dynamic Contrast for all TV channels. 4 Press MENU. Sleeptimer FEATURES Pip size 5 The MAIN MENU reappears. Child Lock 4 Select Features with the keys V or W and press OK. General PP store 5 The FEATURES menu appears. Message 4 Select General PP store with the keys V or W and press OK. Timers 5 The message Stored appears briefly on the bottom of the screen. Recording Source 5 You have created and stored a
ページ14に含まれる内容の要旨
Select the sound settings During manufacture 6 types of sound style have been pre-defined. You can choose among these six different styles with the SOUND key of the SMART CONTROLS smart controls on the door of the remote control. PICTURE SOUND 4 Press the Smart Controls' key SOUND repeatedly to select : Standard, Incredible Sound, Music, Movie, Superbass or Personal. 5 The sound styles are displayed briefly on the top of the screen. Each sound style corresponds with a specific predefined setting
ページ15に含まれる内容の要旨
Select spatial and surround sound, Incredible sound When Spatial On is selected, it seems as though the loudspeakers are spread Volume SOUND further apart from one another. You get a spatial sound effect. Balance Treble Bass You get a super spatial sound effect when Incredible Sound On is selected. Sound Mode Loudness You achieve a Surround Sound effect if you have 2 or for a maximum effect Speech 4 extra loudspeakers connected. See Connect Peripheral Equipment, p. 31. Spatial Incredible sound H
ページ16に含まれる内容の要旨
Adjust the basic picture and sound settings with the Local Menu key Should your remote control be lost or broken you can still change some of the basic picture and sound settings. 4 Press the LOCAL MENU key at the front of the TV. 5 The adjustment Volume, including a bar, appears on the screen. 4 Press the key V - or + behind the door at the front of the TV, to adjust the LOCAL volume. MENU 4 Press the Local Menu key again or repeatedly to select a following adjustment. 5 The adjustments Volume
ページ17に含まれる内容の要旨
B Features 4 Select FEATURES in the MAIN MENU with the keys W or V and press OK. Sleeptimer 5 The FEATURES menu appears. FEATURES PiP Size 4 Use the keys W and V to make your selection in the FEATURES menu. Child Lock 5 Your selection lights up. General PP Store Message Timers Recording Source Sleeptimer With the aid of the sleeptimer you can set a time period after which the TV should switch itself off to standby. 4 Hold the B key pressed down. 5 The counter runs from Off up to 180 min. 4 Hold
ページ18に含まれる内容の要旨
Message With this function you can enter a personal message which will be displayed automatically when the set is switched on from standby. E.g. I'll be late this evening. Don't wait for dinner. 4 Select Message with the keys W or V. Message ................... 4 Press OK. ........................... 5 The MESSAGE menu appears and consists of a message part and a selection menu. Change MESSAGE Clear 4 Select Change with the keys V or W and press OK. Type 5 A block appears on the first positi
ページ19に含まれる内容の要旨
Timers Sleeptimer FEATURES With the Timers menu you can make your TV automatically switch to a Pip size specific programme number from standby or switch over to a different Child Lock General PP Store programme number at a specific time. Message Timers 4 Select Timers with the keys W or V in the FEATURES menu and press OK. Recording Source 5 The TIMERS menu appears and Actual Time lights up. Actual time On prog. no 1 or under the lowest or On prog. no 1 or under the lowest Actual Time TIMERS Pro
ページ20に含まれる内容の要旨
Recording Source See Peripheral Equipment, Recording with your video recorder, p. 34. Select Programme list MAIN 4 Select PROGRAMMES with the keys W or V in the MAIN MENU and press OK. MENU 5 A page with an overview of stored TV channels, together with the names you PICTURE entered for the connected peripheral equipment appears. SOUND Programme numbers from the favourite list are displayed in white characters. FEATURES Programme numbers which are not in the favourite list are displayed in black
