ページ1に含まれる内容の要旨
SALES NETWORK
• •
SAMSUNG TECHWIN CO., LTD. SAMSUNG OPTO-ELECTRONICS UK, LTD.
HIGH RESOLUTION COLOR CAMERA
145-3, Sangdaewon 1-dong, Jungwon-gu, Seongnam-si, Samsung House, 1000 Hillswood Drive, Hillswood Business
Gyeonggi-do 462-703, Korea Park Chertsey, Surrey KT16 OPS
TEL : +82-31-740-8137~8141 FAX : +82-31-740-8145 TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
INSTRUCTION MANUAL
• SAMSUNG OPTO-ELECTRONICS AMERICA,INC. • TIANJIN SAMSUNG OPTO-ELECTRONICS CO., LTD.
ELECTRONIC IMAGING DI
ページ2に含まれる内容の要旨
■ Thank you for purchasing a SAMSUNG CCD CAMERA. Before operating the camera, confirm the camera model and proper input power voltage. In order to that you can understand this manual thoroughly, we'll introduce our model description. SDC-313A SERIES • NTSC MODELS • PAL MODELS SDC-313AND SDC-313APD SDC-313ANA SDC-313APA The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” ■ MODEL DESCRIPTION
ページ3に含まれる内容の要旨
Contents 8 20 Precautions Camera Operation Menu 20 Settings 21 10 • LENS (selection) 23 Composition • SHUTTER (condition and speed control) 24 • WHITE BALANCE control 25 11 • BACKLIGHT (Backlight Compensation) 26 Name and Function of Each Section 11 FRONT • AGC (Auto Gain Control) 27 12 SIDE • SSNR (Samsung Super Noise reduction) 28 13 BOTTOM 29 • SENS-UP (Low illuminance) 14 BACK 30 • SPECIAL • EXIT 35 15 Installation Lens 15 36 Troubleshooting 18 Connecting to a monitor Specification 38 Connec
ページ4に含まれる内容の要旨
Features Warning The camera needs periodic inspection. Horizontal Resolution 530 TV Lines Contact an authorized technician for inspection. Clear image quality has been achieved by employing a CCD with 410,000 pixels(NTSC), 470,000 pixels (PAL), which provides a horizontal resolution of 530 TV lines. Electronic IRIS Stop using your camera when you find a malfunction. If you use your camera around smoke or unusual heat for a long time, a fire The electronic IRIS function enables continuous automat
ページ5に含まれる内容の要旨
Precautions Do not install under extreme Do not install in high humidity Do not drop the camera or Never keep the camera face to temperature conditions. environment. subject it to physical shock. strong light directly. Use only under temperature conditions May lower image quality. May cause a product malfunction. May damage the CCD. between -10˚C and +50˚C. Provide good ventilation when using in high temperature conditions. Do not expose the camera to Do not expose the camera to rain or other ty
ページ6に含まれる内容の要旨
Component Names and Functions of Parts FRONT 1. HIGH RESOLUTION COLOR CAMERA 2. Auto iris lens connection plug CCD protection cap 3. C-Mount adaptor Please cover the CCD SENSOR when not using it. C-Mount lens adaptor Please attach the C-Mount lens here. CS-Mount lens adaptor Please remove the C-MOUNT lens adaptor and then attach it. Back Focus clamp screw Please loosen the clamp screw with a screwdriver before adjusting the Back Focal 4. Instruction manual length. COLOR CCD CAMERA User’s Manual
ページ7に含まれる内容の要旨
Names and Functions of Parts SIDE BOTTOM Mounting bracket screw hole 1/4"-20 UNC (20 THREAD) Please use the screw hole when L L:4.5mm±0.2mm (ISO standard), fixing the camera onto the or 0.197" (ASA standard) mounting bracket. Please use the clamp screw as specified below. Auto iris lens connector The mounting bracket can be separated and attached to the top of the This is the connection terminal for the auto iris lens. camera. In this instance please do not tighten the screw to a depth of mor
ページ8に含まれる内容の要旨
Names and Functions of Parts Installation Lens BACK Lenses are sold separately. Lenses such as an auto iris lens, CS-Mount lens and C-Mount lens can be used. Notes • Please keep the lens clean. • Any foreign objects and fingermarks on the lens can cause inferior image quality in low light level conditions. When using an auto iris lens 1. Please peel off about 8mm of the outer skin of the auto iris lens cable. Auto iris lens selection switch approx. 8mm Please change the mode to DC or VIDEO depe
ページ9に含まれる内容の要旨
Installation 3. Please remove the cover of the auto iris lens connection plug and solder the When using a C-Mount lens lens cable to the connector pin in the plug. Please take off the CCD protection cap and attach the LENS Pin No. C-Mount lens to the camera by screwing it in clockwise. DC VEDIO No.1 Pin Damping- Red (power) C-mount adaptor No.2 Pin Damping+ NC No.3 Pin Drive+ White (video signal) No.4 Pin Drive- Black (GND) Lens cable When using a CS-Mount lens 1. Please take off the CCD prote
ページ10に含まれる内容の要旨
Installation Connecting to a Monitor Connecting to Power Each model has a different power input specification. Please connect the video output terminal located on the back of the camera to the Please check the model type and standard power requirement before connecting monitor. to power. AC Power Type (AC 24V, 300mA) Use AC24V, 300mA adaptor. For SDC-313ANA/SDC-313APA. CCD Camera Monitor • The connection method varies depending on the type of monitor and accessories. Please refer to the user's
ページ11に含まれる内容の要旨
Camera Operation Camera Operation Menu Settings Settings can be made using the 5 buttons located on the back of the camera. SETUP menu LENS (selection) · MANUAL · DC/VIDEO UP button SHUTTER (Conditon and speed control) · ESC · MANUAL · FLK LEFT button SETUP button WHITE BALANCE control · ATW · AWC · MANUAL · OFF · LOW · MIDDLE BACKLIGHT RIGHT button (Backlight compensation) · HIGH DOWN button AGC (Auto Gain Control) · OFF · LOW · MIDDLE 1. Please press the SETUP button • Settings can now b
ページ12に含まれる内容の要旨
Camera Operation LENS (selection) Select any function you Modes can be changed This function is used to adjust the brightness of the screen. wish to operate by using the LEFT and using the UP and 1. When the SETUP menu is displayed on the screen, please position the arrow RIGHT buttons. DOWN buttons. to point to 'LENS' by using the UP and DOWN buttons. 2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button. 3. Please press the LEFT or RIGHT button if you wish
ページ13に含まれる内容の要旨
Camera Operation SHUTTER (condition and speed control) WHITE BALANCE control Because of using the DC lens, the shutter speed is fixed at 1/60. The screen color can be adjusted by using the WHITE BALANCE function. 1. When the SETUP menu is on the screen, please position the arrow to point 1. Please position the arrow to point to 'WHITE BAL' on the SETUP menu by to 'SHUTTER' by using the DOWN button. using the UP and DOWN buttons. 2. Please select the shutter mode by pressing the LEFT or RIGHT but
ページ14に含まれる内容の要旨
Camera Operation AGC (Auto Gain Control) BACKLIGHT (Backlight Compensation) 1. Please position the arrow to point to 'AGC' on the SETUP menu by using the When there is a strong backlight behind the object, clear images of the background UP and DOWN buttons. as well as the object can still be obtained by using the BACKLIGHT function. 2. Please select the mode you wish to operate by pressing the LEFT or RIGHT 1. Please position the arrow to point to 'BACKLIGHT' on the SETUP menu by button. As the
ページ15に含まれる内容の要旨
Camera Operation SENS-UP (Low illuminance) SSNR (Samsung Super Noise reduction) SENS-UP helps maintain a bright, clear screen image by automatically detecting The background noise in the low light level decreases automatically as the level changes in the level of light in low light level conditions. of gain changes. 1. Please position the arrow to point to 'SENS-UP' on the SETUP menu by 1. Please position the arrow to point to 'SSNR' on the SETUP menu by using the using the UP and DOWN buttons.
ページ16に含まれる内容の要旨
Camera Operation 3) Please press the SETUP button. SPECIAL Camera ID 1. Please position the arrow to point to 'SPECIAL' on the SETUP menu by using ABCDEFGHIJKLM NOPQRSTUVWXYZ the UP and DOWN buttons. abcdefghijklm 2. Please select the mode you wish to operate by pressing the UP or DOWN nopqrstuvwxyz button. -. 123456789 CLR POS END 4) Up to 15 letters can be used for the ID. Please move the cursor to the letter you wish to choose by using the UP and DOWN button. Camera ID ABCDEFGHIJKLM NOPQ
ページ17に含まれる内容の要旨
Camera Operation 5) When a name has been chosen, please select a position for the name display. • If you choose ‘LL’, you can adjust the desired phase. Please move the cursor onto 'POS' and then press the SETUP button. Press the SET button. • You can adjust the desired phase from 0 to 359. Camera ID ABCDEFGHIJKLM NOPQRSTUVWXYZ abcdefghijklm Notes nopqrstuvwxyz -. 123456789 • When the power frequency is 50Hz, you can not use line-lock mode (NTSC Models). CLR POS END • When the power frequency is
ページ18に含まれる内容の要旨
Camera Operation PRIVACY: This modes conceals the areas you do not wish to appear on the screen. SHARPNESS: The outline of the video image becomes cleaner and more distinctive - OFF : Cancels the PRIVACY mode. as the level of SHARPNESS increases. If the level goes up excessively, however, it may affect the video image and generate noise. - ON : Operates the PRIVACY mode. •Please press the SETUP button. •Please press the SETUP button. •Please select the area you do not wish to appear from the
ページ19に含まれる内容の要旨
Troubleshooting If you have trouble operating your camera, refer to the following table. If the Problem Solution guidelines do not enable you to solve the problem, contact an authorized technician. The MOTION • Please check if 'MOTION DETECTION' mode is DETECTION function turned on. Problem Solution is not working. • Please check if the MD LEVEL is too low. • Please check the setting of the MD AREA. • Please check the power connection. Nothing appears on • Please check the video signal
ページ20に含まれる内容の要旨
DECLARATION OF CONFORMITY Specifications Application of Council Directive(s) 89 / 336 / EEC Item SDC-313ANA SDC-313AND SDC-313APA SDC-313APD Manufacturer's Name SAMSUNG TECHWIN CO., LTD Power Source AC24V, 60Hz DC12V AC24V, 50Hz DC12V Manufacturer's Address SAMSUNG TECHWIN CO., LTD 3.5W(Max) 2.5W(Max) 3.5W(Max) 2.5W(Max) 42, SUNGJU-DONG CHANGWON-CITY, Total Pixels 811(H) x 508(V) 795(H) x 596(V) C C Effective Pixels 768(H) x 494(V) 752(H) x 582(V) KYUNGNAM, KOREA, 641-120 D Size 1/3'' Super HAD
