ページ1に含まれる内容の要旨
MFC-9880
OWNER’S MANUAL
ページ2に含まれる内容の要旨
THIS EQUIPMENT IS DESIGNED TO WORK WITH A TWO WIRE ANALOGUE PSTN LINE FITTED WITH THE APPROPRIATE CONNECTOR. APPROVAL INFORMATION Brother advises that this product may not function correctly in a country other than where it was originally purchased, and does not offer any warranty in the event that this product is used on public telecommunication lines in another country. i
ページ3に含まれる内容の要旨
ii
ページ4に含まれる内容の要旨
Using This Manual Thank you for purchasing a Brother machine. This machine has been designed to be simple to use, with LCD screen prompts to guide you through functions. However, you can use the machine to its fullest potential by taking a few minutes to read this manual. Additionally, the machine has a Reports key. Press Reports and 1 to print a help list of basic operational steps and functions. Finding Information All chapter headings and subheadings are listed in the Ta
ページ5に含まれる内容の要旨
User-Friendly Programming We have designed the machine with on-screen programming. User-friendly programming helps you take full advantage of all the functions the machine has to offer. Since your programming is done on the LCD, we have created step-by-step on-screen prompts to help you program the machine. All you need to do is follow the prompts as they guide you through the function menu selections, programming options and settings. Additionally, you can program settings more quic
ページ6に含まれる内容の要旨
Table of Contents Using This Manual User-Friendly Programming Table of Contents.................................................................................v PREPARATION AND SIMPLE USE Preparation and Simple Use Guide Advice for Preparation and Simple Use Guide....................................4 Control Panel Overview.....................................................................10 BASIC FAX USE Chapter 1 Setup Initial Settings ........................
ページ7に含まれる内容の要旨
Chapter 8 Polling Polling Receive.................................................................................. 46 Polling Transmit ................................................................................ 48 Chapter 9 Remote Fax Options Setting Fax Storage............................................................................ 49 Fax Forwarding ................................................................................. 49 Remote Retrieval .............
ページ8に含まれる内容の要旨
® Chapter 13 Using the Windows -Based Brother Control Centre ® (For Windows Only) Brother Control Centre ......................................................................85 Using the Scan Keys with Windows PC............................................86 Using the Control Panel Keys............................................................87 Brother Control Centre Features........................................................88
ページ9に含まれる内容の要旨
OPTIONAL ACCESSORIES Chapter 20 Optional Accessories Memory Board................................................................................. 155 Optional Paper Tray ........................................................................ 158 Network (LAN) Board .................................................................... 158 APPENDIX Chapter 21 Specifications Fax Specifications ........................................................................... 159 Printer Specif
ページ10に含まれる内容の要旨
PREPARATION AND SIMPLE USE Preparation and Simple Use Guide Steps to prepare and use the machine simply Follow the steps below to prepare and use the machine simply. However, before you perform these steps, see Important Safety Information (page 152), and Advice for Preparation and Simple Use Guide (page 4). If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE. 1 Read the Quick Setup Guide Follow the instructions on the Brother Quick Setup Guide to set up the machine. 2
ページ11に含まれる内容の要旨
4 Pull up the document stopper. Document Stopper If the original “double-feeds”, try to straighten the paper or try again by inserting a simple sheet of original in the ADF or use glass platen. Using the Glass Platen To use the glass platen, the ADF must be empty. Documents are Face Down on the Glass Platen 1 Lift the document cover. 2 Using the document guidelines on the left, centre the document FACE DOWN on the glass platen. 3 Close the document cover. If the document is a book or is thick,
ページ12に含まれる内容の要旨
PREPARATION AND SIMPLE USE 3 Faxing from the ADF (Automatic Document Feeder) 1 Insert the document face up in the ADF. 2 Dial the fax number, then press Fax Start. 4 Faxing from the Glass Platen 1 Place the document face down on the glass platen. 2 Dial the fax number, then press Fax Start. The machine starts scanning the first page. 3 To send a single page, go to Step 5—OR—To send MEMORY #001 99% multiple pages, go to Step 4. NEXT:PRESS SET DIAL:PRESS START 4 Place the next page on the glass p
ページ13に含まれる内容の要旨
Advice for Preparation and Simple Use Guide Choosing a Location Place the machine on a flat, stable surface, such as a desk. Select a place that is free of vibration and shocks. Locate the machine near a telephone wall socket and a standard earthed electrical socket, grounded power outlet. Avoid placing the machine where it may be knocked. Do not place near heaters, air conditioners, water, chemicals or refrigerators. Do not expose the machine to direct sunlight, excessive heat, moisture or
ページ14に含まれる内容の要旨
PREPARATION AND SIMPLE USE Connecting the Power Cord • This machine must be fitted with an earthed plug. • Since the machine is earthed via the mains plug, you can protect yourself from potentially hazardous electrical conditions on the telephone network by keeping the power to the machine on when you connect it to a telephone line. Similarly, you can protect yourself when you want to move the machine, by disconnecting the telephone line first, and then the power cord. IMPORTANT: If you nee
ページ15に含まれる内容の要旨
Memory Storage In the event of a power failure, all settings in the menus are stored permanently except for the settings that are valid for the next fax only (e.g. contrast, overseas mode). Multi-Line Connections (PABXs) Most offices use a central telephone system, or PABX. The machine will work with most PABX or key systems that allow a two-wire analogue connection. However, we recommend that you have a separate telephone line for the machine. You can then leave the machine in Fax Only Mode
ページ16に含まれる内容の要旨
PREPARATION AND SIMPLE USE Using Extension Telephones It may be that your premises are already wired with parallel extension telephones, or you intend to add extension telephones to your line, in addition to the machine. While the simplest arrangement is straightforward parallel connection, there are some reasons as to why this arrangement will cause unsatisfactory service, the most obvious of which is inadvertent interruption of a facsimile transmission by someone picking up an extension te
ページ17に含まれる内容の要旨
Connecting an External Telephone Answering Device (TAD) Sequence You might choose to connect an additional answering machine. When you have an external TAD on the same telephone line as the machine, the TAD answers all calls. The machine “listens” for fax calling (CNG) tones. If it hears them, the machine takes over the call and receives the fax. If it doesn’t hear the CNG tones, the machine will not answer the call, and messages can be left on the TAD by callers in the normal way. The TAD m
ページ18に含まれる内容の要旨
PREPARATION AND SIMPLE USE Outgoing Message (OGM) of External TAD Timing is important in recording this message. The message sets up the ways to handle both manual and automatic fax reception. 1 We recommend the outgoing message (OGM) is no longer than 20 seconds. 2 Allow 5 seconds of silence at the beginning of your message. (This allows the fax to detect the calling tone prior to OGM, so reception can be faster.) 3 We recommend that you end your OGM by giving your Remote Activation Code for p
ページ19に含まれる内容の要旨
Control Panel Overview 1 3 5 6 7 10 12 13 2 1 2 3 5 4 6 7 8 9 0 4 9 8 11 14 One Touch Dial Keys Programming Keys: 1 9 These 16 keys give you access to 32 Menu previously stored phone numbers. Lets you access the function and programming mode. Reports 2 Accesses the Reports menu so you can (Left Arrow) select a report to print: Help, Quick Dial, Moves the LCD cursor to the left and Journal, Xmit Verify, System Setup List displays the previous menu and Order Form. option/function. Set Broadcas
ページ20に含まれる内容の要旨
PREPARATION AND SIMPLE USE Scan Keys: Fax and Telephone Keys: A D Scan to E-mail Search/Speed Dial Press this key to start scanning an Lets you look up numbers stored in the original into your E-mail application, dialling memory. Also, lets you dial setting it up automatically as an stored phone numbers by pressing # and attachment. two-digit number. Scan to Image Receive Mode Press this key to scan a picture into your Select how the machine will handle graphics application for viewing and i
