ページ1に含まれる内容の要旨
WebCam with Earset
Model 98061
rev. 12/18/07
ページ2に含まれる内容の要旨
Table of Contents How To Install And Use The PC Camera ..........................................................................................01 Install Driver………………………..…………………………………. ....................................................................01 How To Use Your Headset with your PC ..........................................................................................02 How To Use Your PC Camera…………………………………………….. ........................................................
ページ3に含まれる内容の要旨
How to Install and use the PC Camera Installing the camera driver Use Installer to install camera driver (Recommended) Don’t connect the camera to your computer yet! To install the driver: 1. Insert the CD into your CD-ROM drive; the installer screen will automatically come up. Click the “Install Device Driver” button to start installing. Note: If the installer screen does not come up automatically, click Start, then Run and execute the file “launch.exe” on the CD to start the installer progr
ページ4に含まれる内容の要旨
How To Use the Headset with your PC 1. Place snugly in ear. 2. Plug the 2.5mm plug into the black end of the Headset Adaptor. Plug the other end of the Headset Adaptor into your PC. Earset can be plugged in or disconnected without interrupting call. 3. NOTE: Mute switch will act as answer/off function for some phone models. 4. To change earcup: Carefully pry the edge of the silicone earcup away from the earbud post and pull gently to separate. Position the new earcup over the post and pre
ページ5に含まれる内容の要旨
How To Use Your PC Camera 1. Plug PC camera’s connector to the USB port on your computer. 2. Set the Focus a. Start VideoImpression. b. Select “Capture Video” c. Turn the focus ring until image becomes sharp. 3. Video Recording: a. Start VideoImpression. b. Select “Capture Video” c. To start video recording, click on “Record ” . d. To stop video recording, click on “Stop ”. e. To save captured video, Produce Drive Microso
ページ6に含まれる内容の要旨
How To Install MSN Messenger For Windows Vista/XP/2000 1. Please log on to http://messenger.msn.com to download. 2. After the installation package is downloaded to your computer, it will start installing MSN Messenger. All you have to do is follow the instructions. 3. After the installation is completed, click Start, point to Programs, and click MSN Messenger. 4. After you run Messenger for the first time, you can add friends to your list and send instant messages. How to use the camera with MSN
ページ7に含まれる内容の要旨
Getting Started With VideoImpression When you first run the program, a window will appear that lets you choose the type of project you want to make (you can also open previously saved projects). Choose “Create a New Video.” A new window will appear. It will contain multiple options for gathering your video content. For this walk-though, choose “Get From Album.” Even if you choose one of the other options, you’ll end up at your albums soon or later. Albums contain shortcuts to files
ページ8に含まれる内容の要旨
Media This first step is where you select the “media” (still images, videos, and sound clips) that you want to use to create your movie. All you need to do is choose the components you want and add them to the Storyboard. When you save—or “pro- duce”—your movie, all the components on the Storyboard will be combined together into a single video file. Let’s look at the Storyboard again: Video Clips & Still Images Transitions Audio Tracks The Storyboard The large squares are reserved for
ページ9に含まれる内容の要旨
Edit You’re now ready to touch up and modify your movie components. Different editing options are available depending on the component type. Modifying Image And Video Brightness/contrast 1. Single-click the desired still image or video clip on the Storyboard. 2. Click and drag the sliders to your liking. You can preview the effect within the Player. Trimming Videos And Audio 1. Select the desired video or audio clip on the Storyboard. 2. Drag the Starting Mark to the spot where you wo
ページ10に含まれる内容の要旨
Effects-transitions The third step in the creation process lets you add cool scene transitions between each still image or video component on the Storyboard. Transitions are effects that occur as one movie component changes to another. You can add/delete transitions in the same way that you add/de- lete media components. Click the “Randomize” button to automatically add a random transition to each spot. You can go back to Step 2 to modify the display time for your transitions as well.
ページ11に含まれる内容の要旨
Narrate In addition to being able to add audio files to the Storyboard, you can also record audio directly within the program. To record audio: 1. Click the Audio Settings button and verify the audio configuration (in gen- eral, higher settings will yield higher audio quality but larger file sizes). 2. Click the red Record button. 3. Set the file name and save location for the recorded file. If you want, you can have the file automatically added to an album for easy access in another project
ページ12に含まれる内容の要旨
Produce The final step lets you save your movie in a variety of ways. Consult the Help file for details on the specifics of each case. For this guide, we’ll save a movie as a VCD. When you do this, you can pop the CD into most commercial DVD players to see your movie on your TV! 1. Click on the CD tab. 2. Select the device/drive to which the movie will be written or “burned.” 3. Choose the burn speed. 4. Choose the file type. (Remember, we’re creating a VCD, so choose “Video CD File.”) 5. C
ページ13に含まれる内容の要旨
Getting Help VideoImpression provides an extensive online help. If you need more informa- tion or instructions on how to use a specific feature or tool, click the [Help] button on the upper corner of the screen. 11
ページ14に含まれる内容の要旨
Getting Started With PhotoImpression 1. Connect your camera and your PC with the supplied USB cable. 2. Click Start, Select Programs, PhotoImpression. 3. PhotoImpression main Screen will appear on your desktop. Viewing Camera Images through PhotoImpression 1. To capture a video from the camera to the PhotoImpression main screen . 2. Click the Digital Camera/Scanner button. 3. Click the Soc PC Camera button. 12
ページ15に含まれる内容の要旨
Photo View Options When viewing a single photo, use the set of tools along the top of the screen to zoom in/out, skip to other photos stored in the same location, and rotate the current picture left or right. Enhancing Photos When you’re ready to edit a photo, bring it up on the screen and then pro- ceed to the Enhance module. From there, you can perform various types of modifications. Getting Help PhotoImpression provide an extensive online help. If you need more informa- tion or instruction
ページ16に含まれる内容の要旨
Two-year Limited Warranty Jasco Products Company warrants this product to be free from manufacturing defects for a period of two years from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other products that may be used with this unit. This warranty is in lieu of all other warranties express or implied. Some states do not allow limitations on how long an implied w
ページ17に含まれる内容の要旨
Instrucciones en Español Tabla de Contenido Cómo instalar y usar la cámara para PC ..........................................................................................16 Instalación del controlador .....................................................................................................................16 Cómo utilizar sus Auriculares con su PC ...........................................................................................17 Cómo usar su cámara para PC ...........
ページ18に含まれる内容の要旨
Cómo instalar y usar la cámara para PC Instalación del controlador de la cámara Use el instalador para instalar el controlador de la cámara (recomendado). ¡Todavía no conecte la cámara a su computador! Para instalar el controlador: 1. Inserte el CD en la unidad de CD-ROM; la pantalla del instalador aparecerá au- tomáticamente. Pulse el botón “Install Device Driver” (Instalar controlador del disposi- tivo) para comenzar la instalación. Nota: Si la pantalla del instalador no aparece automáticament
ページ19に含まれる内容の要旨
Cómo utilizar sus Auriculares con su PC 1. Coloque en el oído a comodidad. 2. Conecte el enchufe de 2,5 mm al dorso del Adaptador para Auriculares. Conecte el extremo de su Adaptador para Auriculares a su PC. 3. NOTA: El interruptor de silencio actuará como función de responder/apagar en algunos modelos de teléfonos móviles. 4. Para cambiar de copa de oreja: Curiosee con cuidado la orilla de la copa de oreja lejos del poste del audífono. Tirón separar suavemente. Coloque la nueva copa de
ページ20に含まれる内容の要旨
1. Inserte el conector de la cámara para PC al puerto USB de su computador. 2. Configure el enfoque a. Comience VideoImpression. b. Seleccione “Capture Video”. c. Gire el anillo de enfoque hasta que la imagen aparezca nítida. 3. Grabación de Video: a. Comience VideoImpression. b. Seleccione “Capture Video”. c. Para comenzar la grabación de video, pulse “Record”. d. Para detener la grabación de video, pulse “Stop”. e. Para guardar el video captur
