Ives Offset Top Pivot 7222の取扱説明書

ページ1に含まれる内容の要旨

Installation Instructions
7212/12V and 7222
3/4” Offset Intermediate Pivot
Door
leaf
Bearing
Right hand
spindle
installation shown;
left hand opposite
Frame
leaf
3/32” Allen
Right hand Left hand
wrench
installation installation
3/32” set screw
5/32” Allen
wrench
1. Prepare and mortise hinge stile of door and hinge side jamb to receive pivot set. Determine
pivot location using dimensions on reverse side. The pivots are handed and must match hand
of door. To determine hand of door and proper pivo

ページ2に含まれる内容の要旨

NOTE ! It is very important for installer to verify that intermediate pivot point lines up with center line of top and bottom pivot points before final installation. Both door and frame pivot leafs located from face of door. Intermediate pivot should be evenly spaced between top and bottom pivots. Heel edge of door must be beveled 1/8” in 2”. Frame Leaf Door Leaf Face of door 1/2” Reference line 13 mm 1/2” 13 mm C C 5/16” L 5/16” L 8 mm 8 mm 3/4” C L 19 mm 5/16” 3/4” 8 mm 5/16” 19 mm Face 8 mm o