Dacor RDW24Sの取扱説明書

ページ1に含まれる内容の要旨

RDW24I, RDW24S
Document # PG10-007 Revised 03/12/12 Page 1/3
®
Renaissance 24” Wide PLANNING
Built-In Dishwasher GUIDE
Product tolerances: ±1/16” (±1.6 mm)
Product Dimensions
otherwise stated
Wa RnIng

• Observe all governing codes and ordinances during planning
A
and installation. Contact your local building department for
further information.
• This appliance must be installed in accordance with the
accompanying installation instructions.
Model RDW24I Model RDW24S
Integrated
a pprox

ページ2に含まれる内容の要旨

RDW24I, RDW24S Document # PG10-007 Revised 03/12/12 Page 2/3 Renaissance 24” Wide PLANNING Built-In Dishwasher GUIDE ■ Floor must be solid and level. All cutout surfaces must be at right Electrical Specifications angles. Surrounding cabinet must have sufficient material for Total attachment of the anti-tip brackets (see installation instructions). Dedicated Circuit Required Connected Load ■ The electrical wiring, water supply and drain lines must enter through Grounded, 3-prong, electrical

ページ3に含まれる内容の要旨

RDW24I, RDW24S Document # PG10-007 Revised 03/12/12 Page 3/3 Renaissance 24” Wide PLANNING Built-In Dishwasher GUIDE Drain Specifications Custom Panel/Handle for Model RDW24I IMPORTan T: Should a drain hose longer than the one provided be ■ The custom panel mounting screws are provided with the dishwasher. required, use a hose extension approved for detergents and high Follow the panel dimensions below to ensure that the custom overlay temperature water. Total drain hose length (including f