ページ1に含まれる内容の要旨
WC370 Integrated Dishwasher
Manual for Installation, Use and Maintenance
Passionate about style
Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY
T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
ページ2に含まれる内容の要旨
Important Important The CDA Group Ltd The cannot CDA be Group held Ltd responsible cannot be for held injuries responsible or losses for caused injuries by or inc losses orrect caused use or by inst inc allation orrect of use this or installation of this product. Please note pr that oduct. CDA Please reserv not e the e that right CD to A in reserv validat e the e the right guar to ant inee validat supplied e the with guarant this ee prsupplied oduct following with this inc pr orr oduct ect foll
ページ3に含まれる内容の要旨
• The plastic housing on the water inlet pipe contains an electrically operated valve. The wires that connect to this valve are inside the inlet hose. Do not cut through the inlet hose, and do not put the plastic housing in water. • Children could get locked inside the appliance. Therefore when disposing of an old appliance, cut off the plug and set aside, and damage the door lock so that the door can no longer be closed. Recommendations • To reduce energy and water consumption, remove al
ページ4に含まれる内容の要旨
Control Panel 1 2 3 4 5 6 7 8 Power button (1) • To switch the dishwasher on or off, press the power button (1). When you switch on the dishwasher, the end of programme light will illuminate, and two dashes will appear on the display. Programme display (2) The programme display shows the selected programme and the remaining time to run. If there is a fault on the dishwasher, the fault code will show on the display. Programme selection button (3) • To select a programme, press the program
ページ5に含まれる内容の要旨
Please note: You should ensure that there are no dishes in the upper basket when running a lower basket half-load programme, and none in the lower basket when running an upper basket half-load programme. If you have selected any extra function (3 in 1, prewash, half-load) for a programme, this function will automatically be selected the next time the dishwasher is used. To cancel the selection of any extra function, press the specific extra function button (5, 6 or 7) until the indicator lig
ページ6に含まれる内容の要旨
Detergent To fill the detergent compartment 1. Push the latch as shown in figure 1. 2. Add the required amount of detergent. The main detergent compartment “b” (figure 2) has lines to allow for specific amounts of 3 3 detergent. These are marked at either 15 cm or 25 cm , to be used depending on how dirty the dishes are. 3 If your dishes are in need of an intensive wash, then add 5 cm of detergent into the prewash section of the compartment “a” (figure 2). 3. Then close the d
ページ7に含まれる内容の要旨
Detergent To fill the detergent compartment 1. Push the latch as shown in figure 1. 2. Add the required amount of detergent. The main detergent compartment “b” (figure 2) has lines to allow for specific amounts of 3 3 detergent. These are marked at either 15 cm or 25 cm , to be used depending on how dirty the dishes are. 3 If your dishes are in need of an intensive wash, then add 5 cm of detergent into the prewash section of the compartment “a” (figure 2). 3. Then close the d
ページ8に含まれる内容の要旨
ENGLISH T esting strip The washing effectiveness of your machine depends on the softness of the tap water. For this reason, your machine is equipped with a system that reduces the hardness in mains water supply.The washing effectiveness will increase when the system is correctly set. To find out the water hardness level of water in your area, contact your local water board or determine water hardness level by using the test strip(if available). Softener Adjustment The efficiency of your dishwash
ページ9に含まれる内容の要旨
Rinse Aid Rinse Aid To fill the rinsRinse Aid e aid compartment Rinse Aid To fill the rinse aid compartment To fill the rinse aid compartment To fill the rinse aid compartment 1. Open the rinse aid compartment by turning and removing the cap as 1. Open the rinse aid compartment by turning and removing the cap as 1. Open the rinse aid compartment by turning and removing the cap as shown in figure 4. 1. Open the rinse aid compartment by turning and removing the cap as shown in figure 5.
ページ10に含まれる内容の要旨
Top basket height adjustment while it is full Dishwasher Baskets Dishwasher Baskets The upper basket has two different heights available, to allow for larger Basket height adjustment mechanism on the top basket of To adjust the height of the upper basket: products in either the upper or lower basket. To raise or lower the upper Top basket height adjustment while it is full your machine is designed to let you adjust the height of your Top basket height adjustment while it is full
ページ11に含まれる内容の要旨
Standard loading and Test Data Standard Loading and Test Data Capacity Capacity • • Upper and low Upper and lower bask er baskets: 1 ets: 12 plac 2 place set e settings. tings. • • The upper bask The upper basket should be adjust et should be adjusted t ed to high position. o high position. • • Cups should be plac Cups should be placed on t ed on to the dish r o the dish rac ack pins. k pins. Detergent / Rinse aid Detergent / Rinse aid 3 • 5 + 25 cm , in accordance with EN50242-DIN
ページ12に含まれる内容の要旨
Programme Listing Auto Auto- Auto- Programme name Intensive Express Economy Quick Prewash Intensive+ Intensive normal delicate O O O O O 60 60 50 40 - 70 and temperature O O O 60-70 50-60 30-50 Level of soil High High Low High Medium Medium Low - High Detergent required A+B A+B A A+B A+B A+B A - A+B The dishwasher is equipped with a sensor that Prewash Prewash Prewash Prewash Prewash Prewash automatically adjusts the washing time, temperature and amount of water required. O 50 Prewash O O O O
ページ13に含まれる内容の要旨
ENGLISH MAINTENANCE AND CLEANING Cleaning the machine in regular intervals prolongs the machine's service life. Oil and lime may accumulate in the machine's washing section. In case of such accumulation; ENGLISH -Fill the detergent compartment without loading any dishes into the machine, select a programme that runs at high temperature, and start the machine. In case of insufficiency, use special cleansing material available in the market. (Cleansing material produced special to ENGLISH machines
ページ14に含まれる内容の要旨
Failure Codes and Troubleshooting The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance. Error Code Error description Advice Turn off the dishwasher and disconnect the water supply. F1 Alarm is active against water overflow. Contact CDA service. Drain hose is blocked. The filters of your machine might be blocked. The waste water in the machine can not be F2 discharged. Restart the dishwasher and cancel the programme. If the error c
ページ15に含まれる内容の要旨
Failure Codes and Troubleshooting Problem Possible cause Check the plug, fuse and circuit breakers of the mains supply. The water tap is turned off. The programme will not start The dishwasher door is not fully closed. The water inlet filter or the machine filters are blocked. The water drain hose is blocked or kinked. Water remains inside the dishwasher at the end of a programme The filters are blocked. Power failure. The dishwasher stops in the middle of a programme Water inlet failure. Prog
ページ16に含まれる内容の要旨
Electrical information Warning! This appliance must be earthed. The mains lead of this appliance has been fitted with a BS 1363A 13 amp fused plug. To change a fuse in this type of plug, follow the steps below: 1. Remove the fuse cover and fuse. 2. Fit replacement 13A fuse, ASTA approved to BS 1362 type, into the fuse cover. 3. Replace fuse cover. Important: Do not use the appliance without the fuse cover in position. How to connect an alternative plug If the fitted plug is not suitable f
ページ17に含まれる内容の要旨
Installation Installation • Do not install this appliance if it is damaged in any way. Installing a • Do not install this appliance if it is damaged in any way. Installing a damaged appliance may invalidate the warranty. damaged appliance may invalidate the warranty. • The water supply tap should be located in an adjacent cupboard so that it • The water supply tap should be located in an adjacent cupboard so that it can be accessed after installation. can be accessed after i
ページ18に含まれる内容の要旨
Fitting the integrated appliance door Where non-standard integrated appliance doors are supplied, additional fitting instructions are required to ensure compatibility with this product. The machine is supplied with a fitting template and these instructions should be followed as normal. However, the fitting template needs to be located lower down the fascia door; this is shown below. The amount of offset, Y, depends on the height of the fascia door and can be calculated as X = 723mm. For exa
ページ19に含まれる内容の要旨
Notes 18
ページ20に含まれる内容の要旨
To contact our Customer Care Department, or for Service, please contact us on the details below. Passionate about style Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www.cda.eu
