KitchenAid KUDD01SSの取扱説明書

ページ1に含まれる内容の要旨

®
Single Drawer Dishwasher
PRODUCT MODEL SERIES OVERALL DIMENSIONS
KUDD01SS
22⁷⁄₁₆" *
23⁷⁄₁₆"
(57 cm)
(59.5 cm)
Electrical: 120-volt, 60 Hz, AC-only, 15 or
20 amp fused electrical supply is required. A
time-delay fuse or circuit breaker and separate 16³⁄₃₂"
circuit is recommended.
Water: A hot water line with 4.3-145 psi side
attaching
(30-1000 kPa) water pressure. Water temperature
tabs
must be minimum 120°F (49°C) at dishwasher. An
easily accessible valve with ³⁄₈” compression
fitting must b

ページ2に含まれる内容の要旨

® KitchenAid Single Drawer Dishwasher Custom Cabinet Requirements 7 19 ⁄8” NOTE: Diamond Utility Hole: (50.5 cm) symbol indicates 1 7 1 ⁄2” (3.8 cm) dia. 16 ⁄32” Side Attaching Tab either side immediately (41.2 cm) screw locations. adjacent to corner 13 3 ⁄16” (9.7 cm) 5 2 ⁄8” (6.7 cm) 7 22 ⁄8 ” (58.0 cm) 5 23 ⁄8” (60.0 cm) The minimum thickness of cabinet 5 cavity sides and bottom is ⁄8” (1.6 cm) FIGURE 2 • A 3-prong grounded outlet must be installed within IMPORTANT:

ページ3に含まれる内容の要旨

® KitchenAid Single Drawer Dishwasher Custom Door Panel Requirements MODEL: KUDD01SSPA 9” 3) On the front side of the custom door panel, measure, (22.9 cm) mark and cut a hole for the medallion to size as shown 5 2 ⁄16” (See figures 1 & 2). (5.9 cm) NOTE: The medallion must be placed within the specified CUSTOM 5” medallion area. Do not locate outside of this specified area PANEL (12.7 cm) (See figure 1). (Front Side) 4) Lay the custom door panel face down on a protective surfa