KitchenAid KUDD01DPPAの取扱説明書

ページ1に含まれる内容の要旨

®
Undercounter Dishwasher
PRODUCT MODEL SERIES OVERALL DIMENSIONS
KUDD01DPPA
23-7/16"
22-7/16" *
(59.5 cm)
(57 cm)
raised tabs for
optional top
attaching brackets
Electrical: A 120-volt, 60 Hz, AC-only, 15-amp
fused electrical supply is required. (Circuit breaker
or time-delay fuse is recommended.) It is
recommended that a separate circuit serving only
32-3/16"- 34-1/2"
this appliance be provided. 30" ***
(81.8 cm - 87.8 cm)
(76.2 cm)
The 3 prong grounded outlet must be installed
within 6"

ページ2に含まれる内容の要旨

® KitchenAid Double Drawer Dishwasher Custom Door Panel Requirements MODEL: KUDD01DPPA 9” IMPORTANT: It is recommended that the top and (22.9 cm) bottom custom door panels be made from suitable 5 2 ⁄16” material to withstand damp conditions or adequately (5.9 cm) sealed with a moisture-resistant material to withstand CUSTOM 5” moisture and humidity. PANEL FOR (12.7 cm) TOP DRAWER 1) Cut the top drawer custom door panel to size as shown (Front Side) (See figure 1A). The custom

ページ3に含まれる内容の要旨

® KitchenAid Double Drawer Dishwasher Custom Door Panel Requirements MODELS: KUDD01DPPA Horizontal Position Line 7) On the back side of the top drawer custom door panel, 7 1 ⁄16” 1 rout a ⁄4” (6.4 mm) radius around the medallion cutout CUSTOM (36.5 mm) previously cut in step #4. The medallion end does not PANEL FOR need to be routed. TOP DRAWER (Back Side) 8) On the back side of the bottom drawer custom door 1 panel, rout a ⁄4” (6.4 mm) radius around the medallion Vertical cutout