ページ1に含まれる内容の要旨
DVD-P390K
DVD Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register your
product at
www.samsung.com/global/register
AK68-01808C
ページ2に含まれる内容の要旨
precautions - When condensation forms inside the player 1. Setting up due to sharp changes in temperature, the - Refer to the identification label located on player may not operate correctly. If this the rear of your player for its proper operat- occurs, leave the player at room tempera- ing voltage. ture until the inside of the player becomes - Install your player in a cabinet with ade- dry and operational. quate ventilation holes. (7~10cm) Do not block ventilation holes on any of the com
ページ3に含まれる内容の要旨
before you start table of contents Accessories Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Check for the supplied accessories below Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Setup General Features . . . . . . . . . . . . . . . . . . . . . . . . . .4 Disc Type and Characteristics . . . . . . . . . . . . . . . .5 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Tour of the Remote Control . . . . . . . . . .
ページ4に含まれる内容の要旨
setup Note General Features - Discs which cannot be played with this player. Excellent Sound • DVD-ROM • DVD-RAM Dolby Digital, a technology developed by Dolby • CD-ROM • CDV Laboratories, provides crystal clear sound reproduc- • CDI • CVD tion. • CDGs play audio only, not graphics. Screen - Ability to play back may depend on recording Both regular and widescreen(16:9) pictures can be conditions. viewed. • DVD-R, +R Slow Motion • CD-RW An important scene can be viewed in slow
ページ5に含まれる内容の要旨
● SETUP Disc Type and Characteristics This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Types (Logos) Recording Types Disc Size Max. Playing Time Characteristics - DVD contains excellent sound and Single-sided 240 min. DVD video due to Dolby Digital and MPEG- 12 Cm Double-sided 480 min. Audio 2 system. + - Various screen and audio functions Video Single-sided 80 min. can be easily selected through the on- 8 Cm Double-sided 160 min. screen me
ページ6に含まれる内容の要旨
setup Description Front Panel Controls 6 7 2 1 3 4 5 8 5. USB Host 1. STANDBY/ON ( ) Connect digital still camera, MP3 player, memory stick, Turn on/off and the player is turned on/off. Card reader, or another removable storage devices 2. DISC TRAY 6. DISPLAY Place the disc here. Operation indicators are displayed here. 3. MIC 1/2 7. OPEN/CLOSE/STOP ( ) Connect Microphone for karaoke functions. Turn on/off and the player is turned on/off. Press to open and close the disc tray. 8. PLAY
ページ7に含まれる内容の要旨
● SETUP Rear Panel 2 3 1 1. AUDIO OUT JACKS - If P-SCAN Video Output is selected in Setup Menu, - Connect to the Audio input jacks of your television or progressive scan mode will work. audio/video receiver. - If I-SCAN Video Output is selected in Setup Menu, interlaced scan mode will work. 2. VIDEO OUT JACK - Use a video cable to connect to the Video input jack 4. DIGITAL AUDIO OUT JACKS on your television. - Use either a coaxial digital cable to connect to a com- patibl
ページ8に含まれる内容の要旨
setup Tour of the Remote Control 1. DVD POWER Button Turns the power on or off. 2. REPEAT Button Allows you to repeat play a title, chapter, track, or disc. 3. DISC MENU Button Brings up the Disc menu. 12 1 4. BOOKMARK 13 2 Quickly find bookmark sections of a DVD. 5. SEARCH Buttons ( ) / 14 3 Allow you to search forward/backward through a disc. 15 4 6. STOP Button ( ) 5 7. SKIP Buttons ( ) 16 / 6 Use to skip the title, chapter or track 7 8. MENU Button 17 Brings up the DVD playe
ページ9に含まれる内容の要旨
● CONNECTIONS connections Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. - Refer to the user’s manual of the additional components you are connecting for more information on those particular components. Connection to a TV (For Video) 1 Using video/audio cables, connect
ページ10に含まれる内容の要旨
connections Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - You will enjoy high quality and accurate color reproduction images. Component video separates the pic- ture element into black and white(Y), blue(P ), red(P ) signals to present clear and clean images. (Audio B R signals are delivered through the audio output.) 1 Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of T
ページ11に含まれる内容の要旨
● CONNECTIONS Connection to a TV (Progressive) 1 Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of the DVD player to the COMPONENT IN terminal of TV. WHITE 2 BLUE GREEN Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the RED DVD player and TV. RED 3 Component cable Audio Cable Press the input selector on your TV remote control until the Compone
ページ12に含まれる内容の要旨
connections Connection to an Audio System (2 Channel Amplifier) 1 Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. 2 WHITE Using the video signal cable(s), connect the VIDEO, COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV as described on pages 9 to 11. RED 3 Turn on the DVD player, TV, and Amplifier. Audio Cable RED WHITE 4 Pr
ページ13に含まれる内容の要旨
● CONNECTIONS Connection to an Audio System (Dolby Digital, MPEG2 or DTS Amplifier) 1 If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier. 2 Using the video signal cable(s), connect the VIDEO COMPONENT OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT IN terminal of your TV as described on pages 9 to 11. 3 Turn on the DVD player, TV, and Amplifier. Coaxial Cabl
ページ14に含まれる内容の要旨
basic functions 5. Removing Disc Playing a Disc Press the OPEN/CLOSE ( ) button. Before Play 6. Pausing Play - Turn on your TV and set it to the correct Video Input Press the PLAY/PAUSE ( ) on the remote control by pressing TV/VIDEO button on the TV remote con- during play. trol. - Screen stops, no sound. - If you connected an external Audio System, turn on To resume, press the PLAY/PAUSE ( ) button your Audio System and set it to the correct Audio once again. Input.
ページ15に含まれる内容の要旨
● BASIC FUNCTIONS Note Using the Search and Skip To access the desired title when there is Functions Title more than one in the disc. For example, if there is more than one movie on a DVD, During play, you can search quickly through a chapter or each movie will be identified. track, and use the skip function to jump to the next selection. Most DVD discs are recorded in chapters Chapter Searching through a Chapter or so that you can quickly find a specific pas- Track sage (similar to trac
ページ16に含まれる内容の要旨
basic functions Using the Title Menu Using the A-B Repeat function 2. Press the REPEAT A-B button at the point where you 1. During stop mode of a DVD disc, press the MENU button want repeat play to start (A). on the remote control. Press the REPEAT A-B button at the point where you 2. Press the π/† buttons to select Title Menu, then press the want the repeat play to stop (B). ® or ENTER button. - To return to normal play, press the CANCEL button. 3. To return to normal
ページ17に含まれる内容の要旨
● ADVANCE FUNCTIONS advance functions If you are using a 4:3 TV Adjusting the Aspect Ratio For 16:9 aspect ratio discs (EZ View) - 4:3 Letter Box To play back using aspect ratio Displays the content of the DVD title in 16:9 aspect ratio. The (DVD) black bars will appear at the top and bottom of the screen. 1. During play, press the INFO button on the remote control. - 4:3 Pan Scan 2. Press the π/† buttons to select Shortcut, then press The left and right portions of the scr
ページ18に含まれる内容の要旨
advance functions Press Audio / √ button MPEG4 2. To remove the SUBTITLE icon, press the CANCEL or at remocon repeatedly to MP3 1/1 AUDIO select the desired Audio RETURN button. on MPEG4 then press the ENTER . Note - You have to change the desired subtitle in the 2. To remove the AUDIO icon, press the CANCEL or RETURN Disc Menu, according to discs. Press the DISC MENU button. button. - This function depends on what subtitles are encoded on the disc and may not wo
ページ19に含まれる内容の要旨
● ADVANCE FUNCTIONS Using the Bookmark 5. Press the CANCEL button to delete a bookmark number. Function 1 2 3 This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time. Using the Zoom Function Using the Bookmark Function Using the Zoom Function (DVD/ (DVD/VCD) VCD) 1. During play, press the INFO button on the remote control. 1. During play, press the INFO button on the remote control. 2. Press the π/† buttons to select Shortcut.
ページ20に含まれる内容の要旨
advance functions MP3/WMA/CD Audio Playback - : Name of currently playing file. 1. Open the disc tray. Place the disc on the tray. Close the tray. - : Current Playback Time. - Only one kind of file is played back when a disc or a folder contains both MP3 and WMA files. - : Current Playback Mode : There are four 2. Press the π/† or √/® buttons to select a song file. modes. They can be selected in order by Press ENTER to begin playback of the song file. pressing
