ページ1に含まれる内容の要旨
SIZE : 148 X 210mm
DVD HOME THEATER SYSTEM
R
1
CD PLAYBACK
VCR
CD-R CD-RW
AV INPUT
OWNER'S MANUAL
ページ2に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS The lightning flash with an arrowhead symbol, within CAUTION WARNING the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock. The exclamation point within the equilateral triangle is WARNING: TO REDUCE THE RISK OF ELECTRIC intended to alert the user to the presence of important SHOCK, DO NOT REMOVE COVER (OR BACK). NO opera
ページ3に含まれる内容の要旨
Important Safety Instructions 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Water and Moisture - The appliance should not be used near water
ページ4に含まれる内容の要旨
TABLE OF CONTENTS Important Safety Instruction ......................1-2 Repeat Playback ......................................... 25 Repeating a title/chapter (DVD) ............................ 25 Disc Formats ................................................ 4 Repeating a single track/whole disc (CD) ........... 25 Before You Start ........................................... 5 Repeating a specific section (DVD) ...................... 25 Using the remote control ................................
ページ5に含まれる内容の要旨
DISC FORMATS The Unit can playback discs bearing any of the following marks: DVDs [8cm(3")/12cm(5”) disc] Compatible Audio CDs [8cm(3")12cm(5”) disc] Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs. If the Region number printed on the DVD disc does not correspond to the Region number of this Unit, this Unit cannot play that disc. 1 The region number of this Unit is 1.
ページ6に含まれる内容の要旨
BEFORE YOU ST ART Using the Remote Control Point the Remote Control at the REMOTE SENSOR located on the Unit. When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation. The recommended effective distance for remote operation is about 16 feet (5 meters). To install Batteries 1.Open the battery door. 2.Insert two "AA" or UM-3 size batteries. Battery Replacement When batteries become weak, the operating distance of
ページ7に含まれる内容の要旨
PARTS AND FUNCTIONS Remote Control 1) STANDBY / ON button Turns the Unit on and puts it in standby mode. 2) RETURN button OPEN/ STANDBY/ON Return to the normal operation after using the SETUP CLOSE FUNCTION RETURN menu. 1 3) Number (0 - 9) and (+10) buttons GOTO Use when creating programs, and entering a parental 2 level password. To select numbers over 9, press +10 button and then the second no. for example, to enter 18, press +10 and then 8. 3 4) 5.1 / 2.1 CHANNELS button Switch speaker outpu
ページ8に含まれる内容の要旨
PARTS AND FUNCTIONS Remote Control 19) FUNCTION button Display the FUNCTION screen where you can check or change various setting. 19 20) OPEN / CLOSE button OPEN/ Use to open or close the disc tray. STANDBY/ON CLOSE 21) GOTO button RETURN FUNCTION 20 Skip directly to a specific location on a DVD disc. GOTO 22) SOUND button 21 Selects sound balance and tone controls for adjustment with the cursor buttons. 23) P. SCAN / CVBS button Changing YUV output to Progressive Scan Video mode or back to CVBS
ページ9に含まれる内容の要旨
PARTS AND FUNCTIONS Front and Top Panel 1 24 3 5 678910 11 1) Disc tray 6) PLAY button Press to start or resume playback Open or close tray by pushing OPEN/CLOSE button. Place a disc on the disc tray, label side up. 7) STOP button 2) STANDBY indicator Stop playing a disc. When the Unit is turned on by pressing the 8) FUNCTION button STANDBY/ON button. If you press the STANDBY / Select the source. ON button on the remote control, the Unit will turn 9) STANDBY/ON button off and go into standby mod
ページ10に含まれる内容の要旨
DISPLAY Front Panel Display MEMORY indicator ANGLE indicator REPEAT 1 and A-B Displayed during Appears when multiple camera playback indicators programmed angles are recorded in the Displayed during playback. section of the DVD that is repeat playback. currently playing. DOLBY DIGITAL indicator Displays while Dolby Digital sound processing is being performed or when the loaded disc contains Dolby Digital sound PRO LOGIC II indicator OPERATION indicator STEREO indicator When PRO LOGIC sound is In
ページ11に含まれる内容の要旨
SETUP For better reception FM FM antenna Connect FM antenna (included) to the FM Y VIDEO (VCR) IN ANTENNA jacks. SUBWOOFER VIDEO OUT AUDIO OUT PB AUDIO OUT VIDEO R 5.1 CH TV L PR L AM AM(MW) (MW) R S-VIDEO OUT DIGITAL LOOP (DVD) VIDEO OUT AUDIO IN AUDIO OUT ANT. Connect the loop antenna (included) to To wall outlet the AM(MW) LOOP ANTENNA terminals. AM(MW) LOOP ANTENNA (SUPPLIED) A.Connecting your TV The unit can be connected to your TV in several different ways, depending on the design of your
ページ12に含まれる内容の要旨
SETUP or Component video outputs (DVD) Some TVs or monitors are equipped with component video inputs. Using the Audio cable (not supplied), connect the left/right AUDIO OUT jacks on your Unit to the left/right AUDIO IN jacks on your TV and the Component video cable (not supplied), connect the Green plug Y VIDEO OUT jack on your Unit to Y VIDEO IN jack on your TV, the Blue plug PB/CB VIDEO OUT jack on your Unit to PB/CB VIDEO IN jack on your TV and the Red plug PR/CR VIDEO OUT jack on your Unit t
ページ13に含まれる内容の要旨
SETUP C. Connecting a VCR 1. Using the supplied Audio/Video cable, connect the yellow plug from VIDEO OUT jack on your Unit to VIDEO IN jack on your TV, connect the left and right AUDIO OUT jacks on your Unit to AUDIO IN jacks on your TV. If you want the sound come from the speakers of the Main Unit, you need not to connect these left and right Audio cable from the Main Unit to your TV. 2. Using the Video cable (not supplied), connect the VIDEO IN (VCR) jack on your Unit to VIDEO OUT jack on yo
ページ14に含まれる内容の要旨
SETUP D. Connecting the speakers & subwoofer The speaker cords have been color-coded to simplify connection. Just plug the POSITIVE (+) and NEGATIVE (-) ends of each speaker wire into the corresponding jacks on the rear of the Unit, matching the color tube on the end of the speaker wire to the color-coded connector. Y VIDEO (VCR) IN SUBWOOFER AUDIO OUT SUBWOOFER VIDEO OUT AUDIO OUT PB AUDIO OUT VIDEO TV R 5.1 CH 5.1 CH L PR L AM (MW) R S-VIDEO OUT DIGITAL LOOP (DVD) VIDEO OUT AUDIO IN AUDIO OUT
ページ15に含まれる内容の要旨
SETUP E. Positioning the speakers and subwoofer FRONT SPEAKERS CENTER Place on both sides of the TV, Place on the top of or equal distances apart. below the TV. REAR SPEAKERS Place right beside or slightly behind your listening position, SUBWOOFER and a little higher than your ears. Can be placed anywhere. E - 14
ページ16に含まれる内容の要旨
SETUP Mounting rear surround speakers 1) Mark the correct mounting position on the wall. 2) Insert a fixing screw(s) at the marked position on the wall. 3) Align the slot hole(s) of the speaker over the screw and pull the speaker downward until it is firmly hooked. Need More Help? DO NOT RETURN THIS TO THE STORE Please call Customer Service at 1-800-252-6123 or visit online help at http://www.18002526123.com Turning on the Unit and TV 1)Press the STANDBY/ON button to turn the Unit ON, or 2)Press
ページ17に含まれる内容の要旨
ADJUSTING THE SOUND To adjust the surround sound balance while Dolby Digital and Pro Logic II decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) Press the SOUND button repeatedly to display , then press the or CURSOR button to adjust the sound level. It will show on the display of the Unit. Front speaker (right) Press the SOUND button repeatedly to display , then press the or CURSOR button toadjust the sound level. It will
ページ18に含まれる内容の要旨
ADJUSTING THE SOUND Pro Logic Emulation Mode The Pro Logic emulation mode offers users the same robust surround processing as original Pro Logic, in case the source content is not of optimum quality, or if there is a desire to hear the program more "as it used to be". When this mode is used, it is called Pro Logic, as before. There is no "Pro Logic I" mode. The Pro Logic emulation mode is optional. Dolby does not require PLII products to use the original Pro Logic decoding algorithm. However, i
ページ19に含まれる内容の要旨
DVD CD PLAYING A DISC Basic playback This owner’s manual explains the basic instructions of this DVD Unit. Some DVD discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD Unit may not respond to all operating commands. This is not a defect in the DVD Unit. Refer to the instruction notes of discs. “ ” may appear on the TV screen during operation. A “ ” means that the desired operation is not permitted by the DVD Unit or the disc. Playing a Dis
ページ20に含まれる内容の要旨
PLAYING A DISC DVD CD Fast Forward/Fast Reverse 1.Press the TUNING or TUNING button when a disc is playing. • The disc begins fast scan at x2 speed. Four speeds are available. Each time TUNING or TUNING button is pressed, the speed of fast scan changes in the following sequence: 2.Press the PLAY button when you reach the desired point to resume playback at normal speed. DVD Slow-motion play 1.Press the SLOW or SLOW button in the play mode. Two speeds are available. Each time SLOW o
