ページ1に含まれる内容の要旨
User Guide | Guide de l’utilisateur | Guía del Usuario
Blu-ray Disc Player| Lecteur de disques Blu-ray | Reproductor de discos Blu-ray
NS-BRDVD
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Front . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player 7 Water and moisture—Do not use your Safety information player near water. For example, do not use it near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a CAUTION swimming pool. RISK OF ELECTRIC SHOCK 8 Accessories—Do not place DO NOT OPEN your player on an unstable cart, stand, tripod, bracket, or table. Warning Your player may fall, causing To reduce the risk of electric shock, do not remove serious injury to some
ページ5に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player 13 Outdoor antenna grounding—If an outside 19 Damage requiring service—Unplug your antenna or cable system is connected to your player from the power outlet and refer player, be sure the antenna or cable system servicing to qualified service personnel under is grounded so as to provide some protection the following conditions: against voltage surges and built-up static � When the power supply cord or plug is charges. Article 810 of the National Electric
ページ6に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Installation location � SD Memory Card playback of JPEG, MP3, or WMA files. For safety and optimum performance of your � SD Memory Card playback of player: picture-in-picture commentary, subtitles, or � Install your player in a horizontal and stable other extras for BD-ROM Profile 1 ver.1.1 position. Do not place anything directly on top files with Blu-ray-video. of your player. Do not place your player directly on top of the TV. Front � Shield your
ページ7に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Back Remote control Component Description 1 VIDEO OUT jack Connect a TV, AV receiver, or video device to this jack using a composite video cable. For more information, see “Connecting a TV using standard video” on page 9. 2 COMPONENT VIDEO OUT Connect a TV or AV receiver jacks with component video input jacks to these jacks using a component video cable. For more information, see “Connecting a TV using component video” on page 9. 3 HDMI OUT jack
ページ8に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Button Description Button Description 9 SUBTITLE Press to open the subtitle 24 Press to open the audio AUDIO menu. For more information, menu. For more information, see “Selecting subtitle see “Switching the audio languages or style” on soundtrack” on page 20 or page 19. “Selecting the audio CD audio mode” on page 21. 10 During playback, press to REV fast reverse. 25 During playback, press to FWD fast forward. In pause mode, 11 Press to start or resu
ページ9に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Display Setting up your player Installing remote control batteries To install remote control batteries: 1 Open the battery compartment cover. 1 Displays the playback status icon. For more information, see “Playback status icons” on page 7. 2 Displays status information, such as title number, elapsed time, and repeat mode. For more information, see “Status information displays” on page 7 and “Displaying status information” on page 16. 2 Insert two AA b
ページ10に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player To connect a TV using HDMI: Connecting a TV 1 Make sure that your player and the TV are turned off. Notes Connect your player directly to the TV. If you 2 Connect one end of an HDMI cable (not connect your player to the TV through a VCR, the provided) to the HDMI OUT jack on the back video may be distorted because of the of your player. copy-protection system. If you connect your player to the TV with HDMI or component video cables and the picture is
ページ11に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Connecting a TV using component video Connecting standard audio A component video connection provides better To connect standard audio: video than standard video. 1 Connect one end of the standard audio cable Your player is compatible with progressive scan. (provided) to the AUDIO OUT L/R jacks on The feature provides you with the higher quality the back of your player. pictures than traditional output system does. You may need to adjust the Component
ページ12に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Connecting a digital audio optical system Connect the AC power cord To connect a digital audio optical system: To connect the power cord: 1 Make sure that your player and the TV are 1 Connect one end of the AC power cord to the turned off. AC IN jack on the back of your player. 2 Connect one end of a digital audio optical cable (not provided) to the DIGITAL OUT (PCM/BITSTREAM) OPTICAL jack on the AC power cord back of your player. 2 Connect the other end
ページ13に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player 6 Press or to select a speaker setting, Channel Level setting then press ENTER. You can select: The Channel Level setting tests each speaker � Speaker Size—See “Speaker Size or sets the volume for each speaker. setting” on page 11. � Channel Level—See “Channel Level Setting Option Description setting” on page 11. Test Tone Off The test tone can be output from the � Delay Time—See “Delay Time setting” on speakers so that you can adjust the page 11. Ma
ページ14に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Using your player Notes � Your player cannot play a disc if the contents All tasks are written for use with the remote are protected by Windows Media™ Digital control unless otherwise noted. Rights Management (DRM). � Windows Media™ Audio is an codec Playable discs, memory cards, and files developed by Microsoft® Corporation in the United States. Playability of dual discs is not guaranteed. � Your player supports SD Memory Cards with The following tabl
ページ15に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player 7 To stop playback, press STOP . If you press � To skip to the next chapter, press SKIP . If this button once then press PLAY , the disc does not have any chapters, playback resumes where it stopped. If you pressing this button goes to the next title (if press this button twice then press PLAY , available). playback begins at the beginning of the disc. � To skip to the beginning of the current chapter, press SKIP . Note � To skip to the previous chap
ページ16に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Controlling audio CD or JPEG/MP3/WMA Folder icon disc playback To control audio CD or JPEG/MP3/WMA disc Audio CD playback: track icon � To pause playback, press PAUSE . To JPEG icon resume playback, press PLAY . � To fast forward or fast reverse, press FWD MP3 icon or REV . Each time you press one of these buttons, the fast-forward or fast-reverse speed changes from 2×, 8×, to 30×. (Audio WMA icon CD, MP3, and WMA only) 6 Press or to select a folde
ページ17に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player 4 Place a disc on the disc tray with the label Playing from an SD Memory Card facing up, then press OPEN/CLOSE to Your player can play JPEG, MP3, or WMA files close the disc tray. The menu opens recorded on an SD Memory Card. automatically. Some Blu-ray Discs provide additional picture-in-picture commentary, subtitles, or other extras in BD-ROM Profile 1 ver.1.1 files. You can download these files from the Internet to a computer, then copy them to an
ページ18に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player 4 Press or to select Media Select, then Formatting an SD Memory Card press ENTER repeatedly to select SD Memory. To format an SD Memory Card: 1 Press SETUP. 5 Press SETUP to close the menu. 2 Press or to select , then press ENTER. To play from an SD Memory Card: The Initialize menu opens. 1 Insert an SD Memory Card, label side up, into the SD Memory Card slot until it clicks into place. SD Memory Card 2 When the file list opens, press or to selec
ページ19に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Chapter information Disc information 3 / 5 0 : 01 : 02 T 1 Current chapter number and total 1 Current track number and total number number of chapters of tracks 2 Elapsed time and remaining time for 2 Elapsed and remaining time for the the current chapter current disc 3 Angle icon (appears when multiple WMA tag information viewing angles are available) 4 Current playback status 5 Current title number 6 Repeat setting if repeat mode is active. 1 Title bas
ページ20に含まれる内容の要旨
Insignia NS-BRDVD Blu-ray Disc Player Creating a playback loop Controlling program playback You can play a section of a Blu-ray Disc, DVD, or To control program playback: audio CD repeatedly. � To open the program screen, press STOP twice. To close the program screen and To create a playback loop: return to the program, press RETURN , 1 During playback, find the place where you then press PLAY . want the playback loop to begin, then press A-B. If you want to cancel the starting point, � To
