ページ1に含まれる内容の要旨
DVD Player
Operating Instructions
LDVD52
LDVD52
Before attempting to connect,
NOTES Any change to the design and specifications will not be advised.
or operating this product.
Please read the instructions completely
ページ2に含まれる内容の要旨
Important Precautions Table of content The design and manufacture of this player takes personnel 1 DVD features _ ______________ 1 safety in to consideration. However, any improper operation may result in electric shock, fire and other hazard. So Please adhere to following precautions. 2 Names of parts ______________ 2 2.1 Frontal panel _________________ 2 Safety precautions 2.2 Rear panel __________________ 2 There is dangerous voltage inside this product, do not open the 2.3 Remote control ___
ページ3に含まれる内容の要旨
DVD features Table of content 1. DVD features 7 Functions of buttons in remote control____ 20 8 Technical terms ______________ 24 It provides this multi-media disc player high-resolution image 9 Troubleshooting ______________ 24 with, high-quality sound and surround sound effect. The DVD 10 Specification _______ ________ 25 player can play not only DVD discs of various versions, but also VCD,SUPER-VCD,DVCD,CD,MP3,etc. Features 1. It is compatible to DVD, VCD, SUPER-VCD, DVCD,CD, MP3,etc. 2. Mult
ページ4に含まれる内容の要旨
Names of parts Names of parts 2. Names of parts 2.3 Remote control 2.1 Front panel 13 1 1.POWER 6 2 3 5 14 2 ON/OFF 2.DISK TRAY 3.OPEN/CLOSE 4.LCD DISPLAY 3 5.PAUSE/PLAY 6.PHONE 15 7.STOP 16 4 8.AUDIO R 17 5 9.AUDIO L 6 10.VIDEO 18 7 19 20 8 21 9 10 8 9 4 1 7 22 10 11 23 24 2.2 Rear panel 12 25 26 8 1 1.MENU PBC 13.TITLE 1.COAXIAL 2.POWER 14.EJECT 2.S-VIDEO 3.NUMBER 15.CLEAR 3.VIDEO RF IN (FROM ANT) 4.SUBTITLE 16.SLOW 4.AUDIO L 5.DISPLAY 17.PROGRAM 5.AUDIO R 6.AUDIO 18. MUTE 6.REMOTE 7.ANGLE 19.
ページ5に含まれる内容の要旨
- Preparation before operation Names of parts 3. Preparation before operation 3.3 Connections 3.1 Unpacking and check The video signal is output through s-video or video output Check for the following Accessories: terminal, while audio signal is output by mixing channel terminal, coaxial terminal, dts signal is only output through or coaxial terminal. There are many solutions to connect TV and this product, user can select one according to the condition of the Remote control 1 apparatus to be co
ページ6に含まれる内容の要旨
Preparation before operation Preparation before operation DVD+AC DVD+AMP Power connection drawing while operating in room Connect AC adapter to +12V input When you turn off the car's power supply by key (ACC), the unit will be turn off and can remember the latest picture. When you turn on the IGNITION SWITCH AMP again and play DVD, the unit will play from the memory point. S-VIDEO VIDEO LR When you turn off the car's power supply by key (ACC), ADAPTOR and want to take away the YELLOW WHITE -110V
ページ7に含まれる内容の要旨
Basic operation Basic operation 4. Basic operation playback, push [ ] again to resume play Ifyou have connected the productto TV, all power lines have been plugged into receptacles, and loaded the batteries into remote control, so you can play the player. Turn on TVpower Mute (available to analog audio output Signal only) If you have connected amplifier, you should also turn it on, and select proper Push [MUTE] to silence the sound of the amplifier mode according to the type of player, press it
ページ8に含まれる内容の要旨
Frequent operation Frequent operation 5. Frequent operation Play fastbackward While playing you can push [FB] button to play fast backward. We will introduce some regular Four speed are available to play forward, press it once the speed operations of different types of function, grows by one shift, when the speed reaches maximum speed, the user can perform one or more press[FB]again to return to normal state. operations as you like, In addition chapter 7details purposes and operationsofall butto
ページ9に含まれる内容の要旨
Frequent operation Frequent operation The playerwill playorderlyasthe userDefined. You can push [MENU/PBC] to change PBC state. Attention:whether the above procedures Display playingtime andstate workwill be subjectto the type ofdisc. Push [DISPLAY] button, TV screen will display current play time state, i.e.playing time, remaining time, press [DISPLAY] each Repeat play time, the screen will show a time alternatively (the time displayed in the frontal panel accordingly changes), the content to b
ページ10に含まれる内容の要旨
Frequent operation System setting There are two kinds of file disc play mode:1. No-menu play mode.2. 6. System setting Menu play mode. The factory default play mode of this unit is no-menu play mode. Please refer to the description on [SETUP] setting menu for Attention: the information on the switching of play modes. Push [SETUP], the screen will display system setting menu, the While playing, you can In the first play mode, after a disc is put into the player and the player moment you can push
ページ11に含まれる内容の要旨
System setting System setting 2.Push [RIGHT] to enter the sub-menu in the sub-menu in the once to move the high lighting band to "STEREO" item, then right screen. If you want to set the screen to "WIDE", firstly push [DOWN] twice to move the high lighting band to "WIDE' item, then push [ENTER]. push [ENTER], 3,Push [MAIN PAGE]to exitsystemsetting page. 3.Push [MAIN PAGE]to exitsystemsetting. Notes:three screen ratio modes, i, e, 16:9 WIDE, 4:3 PS, 4:3 L are available for your selection to enable
ページ12に含まれる内容の要旨
System setting System setting Example 4:Setage controlgrade For original DVD disc, parents can prohibit the those content inadvisable to children to be played, you can operate following these proceduresto setage control grade: 1.Push [POWER] 2.Push [SETUP] to enable TV screen display system setting menu picture, push [DOWN] till the high lighting band move to the item "PREFERENCE", push [ENTER], then push [DOWN] till the high lighting band move to the item "PARENTAL", TV screen will display: 2.
ページ13に含まれる内容の要旨
Functions of buttons in Functions of buttons in remote control remote control 7. Functions of buttons in remote control when PBC is off, while playing you should firstly push [STOP] button,then [PBC]to open yet. This chapter will detail the functions and operation procedures of all buttons in the remote control, for users' instant reference. Most 8.8 [ ](whetheritworks dependonthetypeofdisc) operation procedures can be referred to relevant content of While playing DVD disc, push the button to sk
ページ14に含まれる内容の要旨
Functions of buttons in Functions of buttons in remote control remote control 8.17 [UP],[DOWN],[LEFT],[RIGHT] 8.25 [DVD/GAME] When the screen display the menu of DVD disc or system menu, Push [DVD/GAME] again, the unit will turn to "GAME"state,you the player is in waiting state, you can push these buttons to move can watch other program or play game by LINE INPUT on front the cursorthen selectthe desired item. panel. 8.18 NUMBER BUTTONS 8.26 [VOL+,VOL-] [0], [1].... [9] number buttons are used t
ページ15に含まれる内容の要旨
Technical terms Specifications Checkwhetherthe discisscratched orthere isdirtwhereof. 8. Technical terms This player is controlled by micro computer,if any trouble occurs, please turn off the power, reopen it till 10 minutes later, when there isnotrouble the moment,you can normallyoperate the player. TITLE:For DVD disc it is defined as a long complete segment of Buttondoes notwork image or music or a movie. Each title has a number that makes it easyto search. This may caused by unstable electric
ページ16に含まれる内容の要旨
How To Deal With Disk How To Deal With Disk Attention Don't write on the labeled side. Don't use pickup cleaning preparation. phenyl, Howtoholddisk chemical solution, dispersing solution, anti- static electricity solution or Don'ttouch the face carving information. any other kind of solutions to cleandisk Whenthere are stains onthe face ofdisk Don't stick label or glue- wipe genitallywith a wetcloth and then with a dryone. based note on disk (Don't use disks with remaining glue or When a disk is
