ページ1に含まれる内容の要旨
universal
RCU310_US_IB_REVB 4/10/03 16:43 Page 1
U N IVE RSAL
Remote
Compatible with
today’s most
popular brands.
Consolidates
up to 3
remotes
Dedicated
MENU key
for DVD
navigation
See back
for most
popular brands.
Multi-Brand Use RCU310
remote
ページ2に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 2 Table of Contents Product Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Battery Installation and Information . . . . . . . . . . . . . . . . . . .3 Key Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Program for TV—Direct Entry Method . . . . . . . . . . . . . . . . .5 Program for DVD or VCR—Dire
ページ3に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 3 3 Component Universal Remote Congratulations on your purchase of the 3 component universal remote. This universal remote controls up to three electronic components and makes juggling remote controls a thing of the past. You can program this RCA brand universal remote to operate most models of most brands of infrared, remote-controlled components manufactured after 1990. (See the enclosed Code List for a complete list of brands.) The 3 component unive
ページ4に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 4 Other Keys (listed alphabetically) 0-9 (Number Keys): operate the same as number keys on your original remote and are used to enter component codes when programming the remote control with Direct Entry method. ANTENNA: in TV mode, switches between the signal coming from a satellite receiver or cable box and an off-air antenna. In VCR mode, switches between the signal coming from a VCR and a TV. CHAN (Channel) UP AND DOWN: goes to the next highest or low
ページ5に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 5 Program for TV— Direct Entry Method In order for the 3 component universal remote to control your TV, you must program it with the TV code that matches your TV. These instructions explain the preferred method of programming the remote—the Direct Entry method. 1. Manually turn on the TV. 2. Locate the enclosed TV Code List. Find your brand of TV. Note: If your brand isn’t listed, use one of the Code Search methods to CODE INDICATOR program this remote con
ページ6に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 6 Program for DVD or VCR— Direct Entry Method In order for the 3 component universal remote to control your DVD or VCR, you must program it with the code that matches your component. The VCR•DVD key can be programmed to operate either a DVD or a VCR player. These instructions explain the preferred method of programming the remote— the Direct Entry method. 1. Manually turn on the VCR or DVD player. 2. Locate the enclosed VCR or DVD Code List. Find your b
ページ7に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 7 Program for Satellite or Cable Box— Direct Entry Method In order for the 3 component universal remote to control your satellite or cable box, you must program it with the code that matches your component. The DBS•CABLE key can be programmed to operate either a satellite receiver or a cable box. These instructions explain the preferred method of programming the remote—the Direct Entry method. 1. Manually turn on the satellite receiver or cable box. 2. L
ページ8に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:43 Page 8 Code Search Methods If your component’s brand isn’t listed in the Code List or you have tried all of the codes for your brand and the remote does not operate your component, use one of the Code Search methods below—Manual Code Search or Auto Code Search. Both Code Search methods search all of the codes because your component’s code may be listed under another brand in the code list. Note: The Code Search method may take a long time because the remote
ページ9に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 9 4. Aim the remote at the component (BLINK) and press the ON•OFF key once. The remote automatically sends every code for the specified component one at a time, with a 3 second delay ON•OFF between each code. Keep the remote aimed at the component throughout the process. 5. As soon as the component turns ENTER off, you must press the ENTER key immediately so the remote stores the correct code. If you don’t press ENTER within 3 seconds, the remote will se
ページ10に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 10 Sleep Feature (Select Models Only) This feature will automatically turn off your TV at a duration you choose from 1 to 99 minutes. PROGRAMMING SLEEP FEATURE INDICATOR 1. Press and hold the SLEEP key SLEEP LIGHT until the indicator light illuminates. Release the SLEEP key. 2. Enter time in minutes using the numerical key pad. The indicator 123 light should turn off. (Minute 1 thru 456 9: press 0 before the actual number. 789 Maximum: 99 minutes). 0 3.
ページ11に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 11 Accessing a Menu System DBS• VCR• TV 1. Make sure your components CABLE DVD are turned on and your TV is set to the component's input. 2. Press the component key on the remote (TV, VCR•DVD or DBS•CABLE). (BLINK) 3. Press the MENU key. The indicator light blinks continuously to indicate MENU the remote is in Menu Mode and the component’s menu should appear on the TV screen. Highlighting and Selecting Menu Items To navigate On-screen Menus, use the VOL
ページ12に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 12 Troubleshooting Problem: The remote can’t be programmed to operate your component. • You may be too far away from the component or at a wrong angle. This remote uses IR (infrared) technology to communicate with components. The remote sends the code and the component’s IR sensor reads the code. Therefore, there must be an unobstructed path between the remote and the IR sensor on the component. Move closer and make sure you point the remote at the compo
ページ13に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 13 Problem: The remote is not performing commands properly. • You must put the remote in the correct mode by pressing the corresponding component key (TV, VCR•DVD, DBS•CABLE) so the remote knows which component you want to operate. • Make sure component is “ready” (e.g., DVD player has disc loaded; VCR has tape loaded, etc.) • You may have pressed an invalid key for the mode the remote is in (for example, REC only works in VCR mode). • If you’re trying to
ページ14に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 14 Limited 90-Day Warranty THOMSON INC. warrants that for 90 days from date of purchase, it will replace this product if found to be defective in materials or workmanship. Return it postage prepaid to the Product Exchange Center address for prompt, no-charge replacement with a current equivalent. This replacement is THOMSON INC.’s sole obligation under this warranty. THOMSON INC. will not be responsible for any incidental or consequential damages or for an
ページ15に含まれる内容の要旨
RCU310_US_IB_REVB 4/10/03 16:44 Page 15 15
ページ16に含まれる内容の要旨
SET-UP INSTRUCTIONS INSIDE RCU310_US_IB_REVB 4/10/03 16:44 Page 16 Consolidate three remote controls into one! Operates up to three components, including: •TV • DVD or VCR • Cable box Dedicated MENU key Operates menu system of major TV brands (most RCA, GE, PROSCAN) and some other popular brands. Operates DVD disc menus! Compatible with today’s most popular brands! Your RCA universal remote control is compatible with most brands of infrared remote-controlled components manufactured after
