ページ1に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 1
+++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++
DigiBox VIACCESS
Instruction Manual
Integrated VIACCESS deco-
ding unit. Receives free-to-air
as well as VIACCESS enco-
ded/scrambled satellite pro-
grammes.
+++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++ DIGITAL +++
ページ2に含まれる内容の要旨
FERNBEDIENUNG V1.qxd 20.09.00 11:30 Seite 2 Remote control On/Standby Sound on/off Numeric keypad MONO1/MONO2 Language selection Arrow up Programme + Volume - OK Arrow left Programme list on/off Volume + Programme - Arrow right Arrow down Back EPG Menu on/off TV/Radio mode Delete (red) Transponder informa- tionen (green) Programme informa- EXTERNAL tion (yellow) Information (blue)
ページ3に含まれる内容の要旨
inhalt1.qxd 07.09.00 10:41 Seite 4 Contents 1 Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2, 5 3 Important - please read first . . . . . . . . . . . . . . . . .6 Disposal instructions . . . . . . . . . . . . . . . . . . . . . .6 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . .7 4 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 4.1 Mains connection . .
ページ4に含まれる内容の要旨
inhalt1.qxd 07.09.00 10:41 Seite 5 6.13.7 EPG functions . . . . . . . . . . . . . . . . . . . . . . . . . . .23 6.13.7.1 EPG information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23 6.13.7.2 Pre-selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . .23 6.13.7.3 Activating the VCR (timer mode) . . . . . . . . . . . . . . . . . . . . .23 6.13.7.4 Overview of EPG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24 6.13.7.5 Searching the EP
ページ5に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 2 Programme selection LED display up/down VIACCESS card reader: On/standby mode Insert appropriate smart card carefully into the slot (gold chip at bottom, and in direction of insertion) until it meets resi- stance LNB input HF output SCART connection TV set RS-232 connection/interface SCART connection VCR Input terrestri- Mains power connection al antenna Audio outputs
ページ6に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 6 3 Please read this first NOTE:English-speaking customers - the default setting of your receiver is German. You should go directly to Chapter 5 to change the setting to English (point 5.1 on Page 12) > Before connecting the receiver, first check that you have received all necessary parts. The following are included: 1 receiver 1 mains cable 1 remote control unit 1 instruction manual 1 guarantee card 2 batteries (1.5V size AAA) > Inse
ページ7に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 7 > Now select the line of text OSD LANGUAGE, by marking the appropriate line with the aid of the arrow up/down controls. > Confirm with OK. Safety Instructions For your own safety, you should read the safety instructions carefully before switching on your new receiver for the first time. The manufacturer can accept no responsibility for damage caused by inappropriate handling, or by ignoring the safety advice. > To ensure a sufficien
ページ8に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 8 8 Connecting a DVB receiver a. Connection from LNB to LNB IN connection on DVB receiver b. Mains connection to a satellite installation c. Connection from terrestrial antenna to antenna input (RF IN) on DVB receiver. d. SCART connection between a VCR and the VCR Scart connection on the DVB receiver. e. SCART connection between DVB receiver and the TV set. Optional: f. Connection from HF output on the DVB receiver to the HF input of
ページ9に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 9 4 Connections The references in bold type - a b c etc. refer to the diagram on page 8. 4.1 Mains connection The receiver should only be connected to the mains supply after all connections with other components and equipment have been made. This helps to eliminate the likelihood of dama- ge to the receiver or other components. b Once all other cable connections have been made, connect the receiver to a mains supply of 230 V/50 Hz, u
ページ10に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 10 4.4 Setting the UHF Output Channel The procedure is as follows: > Use the Menu key to select the Main Menu > Now select the entry Settings, marking it in blue by using the up/down arrow keys > Confirm by pressing OK The sub-menu Settings will be displayed. > Now use the up/down arrow keys to mark the line Audio/Video Settings > Confirm by pressing OK. The sub-menu Audio/Video will be displayed > Now select the line UHF Out Channel,
ページ11に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 11 > Once you have found a UHF channel with optimal quality, please remember to enter it into the memory of your TV set. You can now select further settings in the Audio/Video Settings menu, or you can press the Menu key to return to normal operation. The selected setting will be auto- matically stored in memory when you exit the menu. > If your TV set is only equipped with an automatic channel scan, select any UHF chan- nel on your r
ページ12に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 12 5 Installation Now that you have made all the necessary connections to and from your receiver, and have switched it on, you may, if necessary resp. if you wish, optimise the operation of the receiver. 5.1 OSD Language This menu heading gives you the opportunity of selecting a language of your choice, in which the menus will be displayed. The receiver is given a default setting of German in the factory. You have a choice of German,
ページ13に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 13 > Use the up/down arrow keys to mark the entry Basic Settings. > Press OK to confirm this selection > The sub-menu Basic will be displayed. > You can use the up/down arrow keys to move the marker within the menu, and to change the individual positions as stated. When selecting a menu item, please also note any additional screen notices. The following settings can be made: Parental lock: Your receiver is provided with a security cir
ページ14に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 14 > Now highlight the entry Audio/Video Settings, using the up/down arrow keys. > Confirm by pressing OK The sub-menu Settings Audio/Video will be displayed > Use the up/down arrow keys to move the marker (blue highlighted entry) within the menu, and to change the individual settings as indicated. When selecting an opti- on, please also note any additional on-screen notices. The following selections are possible: Screen Format (TV):
ページ15に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 15 Subtitel Your DVB receiver has the facility to display sub-titles. Provided the function Sub-titles has been enabled, and the preferred language selected in terms of the Audio signal selection is available, the sub-titles will be superimposed on the picture automatically. If the function has not been enabled, it can be set manually, Sub-titles are indicated by the symbol in the information display. Please also refer to Point 6.12 i
ページ16に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 16 The following selections can be made in this sub-menu: 5.4.1 Switching DiSEqC on or off DiSEqC (Digital Satellite Equipment Control) is a digital signal that can control the functions of DiSEqC-compatible components via the antenna connection. If your external installation features DiSEqC components, you should enable the DiSEqC control function: > When this entry is highlighted, use the OK key to switch the DiSEqC function on or o
ページ17に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 17 > Confirm by pressing OK. The menu >LNB>Check will now be displayed, together with the DiSEqC setting selected (e.g. A/A 1). The following settings can be made: LOF low band LOF (local oscillator frequency) is the frequency used by the LNB to convert the frequency received into the so-called 1st Intermediate Frequency, which can then be utilised by the receiver. So-called universal LNBs utilise 2 LOFs in order to cover the whole fr
ページ18に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 18 Yellow bar: good reception Green bar: excellent reception 6 Operation 6.1 Switching on and off > Use the key On/standby on the receiver or on the remote control to switch the receiver on. > Pressing the same key on the receiver or on the remote control again will switch the receiver off again. > The receiver is now in standby mode, the display on the receiver will now show the time. If the time is not shown, this must still be acqu
ページ19に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 19 > Press the OK key, and the desired programme will be shown. > Use the up/down arrow keys to move up or down the programme list one line at a time. > Use the left/right arrow keys to move forward or back one page at a time. 6.2.4 Selecting blocked programmes If a programme is selected that is subject to parental lock, the words PIN Number will appear on the screen > Use the numeric key pad to enter your PIN number. The desired pr
ページ20に含まれる内容の要旨
bed_anl_DigiBox_Viaccess_englisch.qxd 13.08.01 11:42 Seite 20 6.6 TV/Radio selection Your receiver has been pre-programmed with a selection of radio as well as TV programmes. When selecting a radio programme, the TV image is switched off, and only the radio pro- gramme name is displayed. > Use the TV/Radio key to select radio mode. The receiver will automatically go to the last radio programme selected. > Press the TV/Radio key again, and the last TV programme selected will be display- ed aga
