Human Touch Massage Chairsの取扱説明書

ページ1に含まれる内容の要旨

Jan 04, 2010

X1103
REPLACING THE MAIN POWER PANEL
iJoy-2400
®
To ensure that Human Touch products are repaired in a manner that is fully consistent with the practices used during the manufacturing process, Human Touch requires that all
SERVICE LEVEL: 2
product repairs are performed using only factory-new parts and in accordance with these product repair instructions.
Tools Required: Phillips-head screwdriver, utility blade, flat-head screwdriver.
SAVE ALL REMOVED PARTS FOR USE DURING REAS

ページ2に含まれる内容の要旨

INSTALLING THE NEW POWER PANEL 1. Connect the new power panel connectors to the corresponding connectors on the side of the chair (Fig.4). 2. Insert the power panel into the opening in the side of the chair, then press firmly until the power panel face plate is flush with the chair upholstery (Fig.5). 3. Using a Phillips-head screwdriver, replace the two screws to secure the power panel to the chair (Fig.6). 4. Carefully apply the new power panel label to the power panel, smoothing it wi