ページ1に含まれる内容の要旨
Digital Video Recorder U 1 ser’s Manual
ページ2に含まれる内容の要旨
Introduction Thank you for purchasing the SVR-940/450. This is a user manual for SVR-940/450. Before product installation and operation, please become thoroughly familiar with this user manual and other manuals referenced by this manual. This user manual and the software and hardware described here are protected by the copyright law. Therefore, with the exception of copying for general use within the copyright law, copying and reprinting the user manual, either partially or in its entirety, o
ページ3に含まれる内容の要旨
Table of contents Introduction ····························································································································································2 Product warranty and limits of responsibility ····························································································2 Chapter 1. Safety Cautions ·······························································································································5 Chapter 2. Sum
ページ4に含まれる内容の要旨
Table of contents 5.3 Menu Screen Setup ·····································································································································42 5.4 SCREEN SETUP ··············································································································································43 5.4.1 CH1~CH4 / CH1~CH9 (for SVR-940) ······························································································43 5.4.2 AUTO SEQUENCE ····
ページ5に含まれる内容の要旨
Chapter 1. Safety Cautions Symbols displayed for each item Refers to information users need to know in order to prevent serious Warning injury or death. Provides information users need to know in order to prevent minor Caution injury or product damage. • Before installation - Verify the supplied voltage (AC100V~AC240V) before connecting the power supply. - Make sure the power supply is off before installation. - Do not install in a very humid environment. Doing so may cause an electric shock o
ページ6に含まれる内容の要旨
Chapter 1. Safety Cautions • During use - Make sure the product is not exposed to shocks or shaking when using the product or during moving. - Do not move the product while it is in operation, and apply strong shocks to the product or throw the product. - I f hard disk drives other than those recommended are used additionally, abnormal operation may occur. Inquire at the point of purchase of the product before installing such a hard disk drive. - Product warranty will not cover delib
ページ7に含まれる内容の要旨
Chapter 2. Summary The Samsung SVR-940/SVR-450 is a digital video recorder designed to be used as a security device in small shops, convenience stores, banks, ATMs, etc. It is a stand-alone device, securing system performance and safety. The Samsung SVR-940/SVR-450 saves video images on an HDD instead of on videotape. It can save quality images even with repeated recording, and facilitates data search by recording and playing video data in a digital file format. Moreover, the Samsung SVR-94
ページ8に含まれる内容の要旨
Chapter 2. Summary Storage Media The built-in HDD is the basic memory supply. Using a USB memory stick or external CD-RW (guaranteed for the recommended models only), users can copy images from the internal HDD. . Basic Memory Supply: Built-in HDD . Backup media: USB memory stick . Backup media: Built-in CD-RW • CD-RW-Maker : LITEON CO., LTD Model : LTR-52327SX Model : SHM-165P6SX02C • CD MEDIA-Maker : SAMSUNG Model : PLEOMAX R80X- Network The Samsung SVR-940/SVR-450 supports a wide range
ページ9に含まれる内容の要旨
Chapter 2. Summary 2.2 Contents The SVR-940/SVR-450 package contains the main unit and its components as specified be- low. When you purchase the unit, please check that the components specified below are included. If any components are missing, please contact your local vendor. SVR-450/940 Main unit 1. Network viewer program CD 2. User Manual 3. Remote controller 4. Batteries for remote controller 5. Adaptor (For SVR-450) 9. Power cable 2.2.1 Control panel on the front Digital Video Recorder
ページ10に含まれる内容の要旨
Chapter 2. Summary LED Indication Number LED Name Description 1 Lights up when power is applied to the system 2 Lights up when the system is backing up. 3 Lights up when an Alarm is triggered. Lights up when client has connected to the system through 4 the Network 5 Lights up when the system is accessing HDD 6 Lights up when the system is recording video data Button Indication Number Button Name Description 1 Press to power the system ON/OFF. 2 Press to navigate to and select a Menu item. Pre
ページ11に含まれる内容の要旨
Chapter 2. Summary Button Indica- Number Button Name Description Playback position moves 1 frame forward/back during 7 Pause. 8 Press to start and stop manual recording 9 Press to search the recorded data 10 Press to launch Setup Menu 11 Press to control the PTZ functions 12 Press to backup still images or video Press to start screen Auto Sequence. Set °ÆSCREEN SETUP/ 13 AUTO SEQUENCE/SEQUENCE°Ø as °ÆON°Ø. Press to select the live display format as full screen, quad 14 screen, or 9-channel sc
ページ12に含まれる内容の要旨
Chapter 2. Summary 2.2.2 Rear Connection terminals Rear panel of SVR-450 Rear panel of SVR-940 1. VIDEO IN Camera Input (NTSC/PAL) 2. AUDIO IN Audio Input 3. AUDIO OUT Audio Output 4. VIDEO OUT Composite Video Output 5. VGA VGA output 6. RS-232 For the engineering console only, not for other purposes. 7. LAN RJ45 Connector 8. RS-485/422 PTZ camera control 9. SENSOR IN Sensor Input 10. ALARM OUT Alarm Output 11. SWITCHES NTSC/PAL, BNC/VGA Select Switch(Please refer to Chapter 5 for the detaile
ページ13に含まれる内容の要旨
Chapter 2. Summary 2.2.3 Remote controller • MENU Button to enter Setup Menu • AUTO For Auto Sequence • SPOT Button for Spot ON/OFF (SVR-940.) • PTZ Button for PTZ camera control. • COPY Button for data backup. • RECORD Button for Manual record ON/OFF. • STOP Button to stop playback. • SEARCH Button for search menu. • STEP P layback position moves 1 frame forward/back during Pause. • PLAY/PAUSE Button to Play and Pause the Playback screen • FAST Button for Forward Playback. Speeds of 2X, 4X, 8X
ページ14に含まれる内容の要旨
Chapter 2. Summary Video Items SVR-450 SVR-940 Input Method Composite Input 4-Channel Composite Input 9-Channel Video Input Level 1.0 Vp-p, Composite Live Screen Display Speed Real time display NTSC: 720 (W) _ 480 (H) Pixels for the full screen. PAL: 720 (W) _ 576 (H) Pixels for the full screen Live Screen 8bit Brightness (256 Gray Scale) 24bit Color (160,000 Colors) 1.0Vp-p Composite, 75Ω / Monitor Output 1.0Vp-p Composite, 75Ω S-VHS RGB Output (Non-Interlaced Scan) VGA Output * Select compos
ページ15に含まれる内容の要旨
Chapter 2. Summary Recording Items SVR-450 SVR-940 Maximum Number of 720X480: 30 Frames/Sec Frames 720X480: 30 Frames/Sec 720X240 : 60 Frames/Sec Sec per Resolution 360X240: 120 Frames/Sec 360X240: 120 Frames/Sec (NTSC) Recording Method 3 Types of Recording Mode: General, Schedule, & Event Pre-Event Recording Individual Channel ON/OFF Setting Image Quality 3-Stage Image Quality: User Configurable HDD Items SVR-450 SVR-940 Default HDD 1 ea (Max. 1ea) 1 ea (Max. 2ea) HDD type EIDE RPM 7200rpm R
ページ16に含まれる内容の要旨
Chapter 2. Summary Search and Playback Items SVR-450 SVR-940 Search by Time: Year, Month, Date, Hour, Minute Search by Channel: per channel Search by Event: Alarm, Motion Detect Search Mode Search by the oldest data: The first recording image Search by the most recent data: The last recording image Search by bar: Using the search bar Speed & direction of Forward and Reverse Playback Fast Search Rewind (X2, X4, X8), Rewind (X2, X4, X8) STEP Search Search in 1 second increments Pause and Frame Pl
ページ17に含まれる内容の要旨
Chapter 2. Summary User Environment Items SVR-450 SVR-940 Operating Temperature 5˚C~ 40˚C Storage Temperature 10˚C~60˚C Humidity 30% ~90%(without dewfall) Exterior Items SVR-450 SVR-940 Material Steel Case Dimensions 260(W) X 350(D) X 65(H)mm Weight About 5.5Kg 11Kg Connection Terminals Items SVR-450 SVR-940 Video Input BNC(4EA) BNC(9EA) Loop out (9EA), Spot (1EA) Monitor Output BNC(1EA) S-VHS 15-Pin DSUB VGA Output (PC Monitor) RCA Input (4), RCA Output (1) Audio Jack USB2.0 (Firmware Upgrade/C
ページ18に含まれる内容の要旨
Chapter 3. Installation 3.1 How to connect all parts The connection layouts for the SVR-450/940 with the monitor, CCTV, and external devices are described as below. SVR-450 SVR-940 Digital Video Recorder U 18 ser’s Manual
ページ19に含まれる内容の要旨
Chapter 3. Installation 3.2 Detailed connection 3.2.1 Camera The SVR-450 and 950 can accommodate up to 4 or 9 cameras respectively. Connect the BNC terminal of each camera to the CAMERA IN terminal of the unit. SVR-450 SVR-940 3.2.2 Audio The SVR-450/950 can save audio information. For storage or output of audio information, it is required to connect the relevant devices. SVR-450 Digital Video Recorder U 19 ser’s Manual
ページ20に含まれる内容の要旨
Chapter 3. Installation SVR-940 Audio input Please connect an RCA audio cable to the AUDIO IN connector (such as camera with built-in microphone and others). (All types of microphone and speaker are compatible with the • For Audio input setting, set [Audio] to [ON] in the Recording setting menu Notes Please connect an RCA audio cable to the AUDIO OUTPUT connector (such as monitor with built-in speakers). • W hen playback with audio in split display mode is not working properly, Notes turn th
