ページ1に含まれる内容の要旨
DVR-4CF
USER MANUAL
Speco Technologies
200 New Highway
Amityville, NY 11701
631-957-8700
ページ2に含まれる内容の要旨
INDEX 1. SAFETY PRECAUTIONS ........................................................................... 2 2. INTRODUCTION........................................................................................ 3 2.1 PRODUCT INTRODUCTION .......................................................................................3 2.2 APPLICATION.........................................................................................................3 3. FEATURES .............................
ページ3に含まれる内容の要旨
1. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. It is advised to read the Safety Precaution Guide through carefully before operating the product, to prevent any possible danger. WARNING: Alert the user to the presence of un-insulated “dangerous voltage”. CAUTION: Alert the user the pres
ページ4に含まれる内容の要旨
2. INTRODUCTION 2.1 Product Introduction World leading technology not only perfect for office safety, personnel home security, public environments, industry surveillance, school, and so on. Quick and simple installation, the best choice for your own ultimate protection. The sate-of-art 4-channel digital recording system, equipped with advanced embedded CPU operating system, powerful MPEG4 compression technology. Standalone type DVR system that is based on embedded OS, replac
ページ5に含まれる内容の要旨
3. FEATURES Auto video input detection Auto detects video input (NTSC/ PAL) and supports combine use of color and b/w cameras. Supports high quality digital video recording Adopts MPEG4 compression technology (NTSC: 30fps/ PAL: 25fps). Video Size Video Resolution • NTSC: 640x 224 • PAL: 640x 272 Monitoring Resolution • NTSC: 720x 480 • PAL: 720x 576 Replaces the conventional VCR. Stores video on hard disks instead of VCR tapes. Large disk capacity, there is
ページ6に含まれる内容の要旨
4. PACKING LIST Check to make sure all of the items shown below are included in your product package. If something is missing, contact your dealer as soon as possible. (1) DVR (digital video recorder) (2) Power adapter (3) Power Cord (Plug type differs depending on area) 5 DVR-4CF
ページ7に含まれる内容の要旨
5. INSTALLATION 5.1 Connectors on the Rear Panel Please setup the connection by following the illustration shown below (network is an optional function): 6 DVR-4CF
ページ8に含まれる内容の要旨
6. NAME and FUNCTION of EACH PART 6.1 Front Panel Buttons and Controls 1. Removable HDD Box 2. Front Panel Button Definition Press this button under monitoring or quad mode to show quad (2) QUAD : display. Press this button under monitoring or record mode to show (3) CH 1 : CH 1 in full-screen. Press this button under monitoring or record mode to show (4) CH 2 : CH 2 in full-screen. Press this button under monitoring or record mode to show (5) CH 3 : CH 3 in full-scre
ページ9に含まれる内容の要旨
(13) PLAY LED : LED lights while playing playback. (14) MENU LED : LED lights when entering setup menu. (15) STOP LED : LED lights when entering stop mode. (16) REC : Press this button under monitoring mode to start recording. (17) STOP : Press this button under playback to return to start monitoring. (18) PAUSE : Press this button under playback to pause playback. (19) REW : Press this button under playback to start reverse scanning. (20) PLAY : Press this button under playback mod
ページ10に含まれる内容の要旨
6.2 Rear Panel Buttons and Controls (1) RJ45: Internet connection terminal (optional). (2) Video Input [VIDEO IN]: Connect to cameras. (3) DC 12V (4A) [Power Input terminal]: power socket. (4) S-Video Output [S-VIDEO OUT]: Connect to the monitor. (5) Video Output [VIDEO OUT]: Connect to the monitor. (6) Video Loop [VIDEO LOOP]. (7) I/O Block [I/O BLOCK]: Terminal function description is shown below. No. Name Function 1 GND Ground Terminal（signal） 2 ALARM 1 Alarm Input Terminal G
ページ11に含まれる内容の要旨
7. OPERATING PROCEDURE 7.1 Power On Each time after power on, DVR will auto-detect its peripherals (self-testing, warm-up, auto detects the hard disk and starts CF-card testing, and etc.) The system will detect the video input and judge whether the video system is NTSC or PAL. When video input is unable to be detected (VIDEO LOSS), the system will send out an alarm, press-on any button to stop the alarm (it will not affect the actual recording). 7.2 Monitoring Mode This mod
ページ12に含まれる内容の要旨
7.3 Record Display Note:CH1: No block figure next to CH1 indicates that it is not recording. EACH: Record Type QUAD: Record Type (T): TIMER RECORD (A): ALARM RECORD (M): MIX RECORD (□): Currently under recording. VIDEO LOSS: Video input unable to be detected. CAMERA1: Name for CH 1. OFF: Channel is set to “OFF”. 11 DVR-4CF
ページ13に含まれる内容の要旨
7.4 Playback Display TIME SEARCH HARD DRIVE: MASTER 03/11/27 18:20:42 - 03/11/27 19:32:32 >01 TIME 2003/11/27 18:20:42 02 TIME 2003/11/27 16:43:56 03 TIME 2003/11/27 15:07:11 (<,>) MOVE (ENTER)CHANGE (PLAY)PLAY (MENU) EXIT (FF)SELECT EVENT OR TIME >01 TIME Total 7 >07 1. First press《STOP》button to stop record, then press《PLAY》button to enter search display. 2. P
ページ14に含まれる内容の要旨
7.5 Note! 1. “Auto Sequence” function operates only during recording or under live status (Dwell Time: 5 seconds). Sequencing will bypass a channel with video loss if programmed accordingly (Example: Video Loss occurs on CH3, sequencing order: CH1→CH2→CH4→QUAD). 2. To deactivate “Auto Sequence” function, press 1, 2, 3, 4, or QUAD. 3. Withdrawing the CF card, each time before the system (DVR) enters recording or playback status, it auto detect the hard disk (detection time is about
ページ15に含まれる内容の要旨
8. SYSTEM SETUP 8.1 Menu （1） (2) (3) > SYSTEM SETUP CAMERA SETUP RECORD SETUP BUZZER SETUP EVENT LIST CF CARD SETTING HARD DRIVE SETUP (4) PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT (1) MAIN MENU: Item subject (First menu layer does not have a subject). (2) Menu Layer Indication: The device consists of four menu layers. ■ ：First Menu Layer (Main Menu) ■■ ：Second Menu Layer ■■■ ：Third Menu Layer ■■■■ ：Fourth Menu Layer (3) Menu O
ページ16に含まれる内容の要旨
8.2 System Setup SYSTEM SETUP ■■ > TIME SET PASSWORD SET LOARD DEFAULT VERSION V1.0 PRESS(< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Press《←》and《→》button to move the cursor. 3. Press《ENTER》button to proceed. 4. Press《MENU》button to exit “System Setup”. 5. “System Setup＂is situated on the second menu layer. Under t
ページ17に含まれる内容の要旨
8.2.1 TIME SET TIME ■■■ 2005/01/11 17：23：06 ^ PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (^) position indicates the current time and date selected. 2. Use《←》or《→》button to move the cursor. 3. Use《ENTER》button to setup time and date. 4. Use《MENU》button to exit “Time Setup”. 16 DVR-4CF
ページ18に含まれる内容の要旨
8.2.2 PASSWORD SET PASSWORD SETUP ■■■ > PASSWORD CHANGE MENU PASSWORD OFF STOP REC PASSWORD OFF PRESS (< >), THEN (ENTER) PRESS (MENU) TO EXIT 1. Cursor (>) position indicates the current function selected. 2. Use《←》and《→》button to move the cursor to the desired item . 3. Use《ENTER》button to make changes. 4. Use《MENU》button to exit “Password Setup”. 5. When the password is setup to “ON”, user will be re
ページ19に含まれる内容の要旨
8.2.2.1 PASSWORD CHANGE ■■■■ CURRENT PASSWORD ：_ _ _ _ _ _ NEW PASSWORD ：_ _ _ _ _ _ CONFIRM PASSWORD ：_ _ _ _ _ _ PRESS (MENU) TO EXIT 1. Press《ENTER》button to show the display above. 2. Enter the current password (CURRENT PASSWORD). 3. Enter new password (NEW PASSWORD). 4. Confirm the new password (CONFIRM PASSWORD). 5. When password change is successful, the
ページ20に含まれる内容の要旨
8.2.3 LOAD DEFAULT ■■■ PRESS (ENTER) TO RESET PRESS (MENU) TO EXIT 1. Press《ENTER》button to show the display above. 2. Press《ENTER》 button the message《ALL SETTING DATA IS INITIALIZED》 will be displayed by flashing 3 times, and returns to default value. When reset procedure has been completed, the message“DVR RESET COMPLETED TURN OFF AND ON THE DVR＂will be displayed, please restart the DVR.
