1. Smart phone requirements • Confirm Password : Checks whether your password is Hardware / Operating System Requirements entered correctly. OS - iOS 4.3.5/5.0/6.0/6.1 • Name : Enter your name. CPU - 600MHz or higher • E-mail : Email address is used to recover your account password. - 128MB or more (recommended), RAM RAM : 50MB (Minimum) ` For further details, please refer to the user’s manual. M - WiFi or 3G/LTE wireless communication- Network enabled smart phone Video Codec - H.264 3.
ページ2に含まれる内容の要旨
4. Camera Registration 5. Camera 1. Tap . 4. Create the and item. Name>, and then tap . From the listed active cameras, ` Create camera password using tap the desired camera’s [ ] M alphanumeric characters between on the right. 1 to 8 without any space. ` You cannot monitor an inactive M camera. 2. Select the camera found and tap . ` When your smartphone is M 2. You may find the Live, Event or conn
ページ3に含まれる内容の要旨
6. Live Video 1. Tap the desired camera’s 3. Press and hold the Mic icon and start talking. Press and Live Video [ ] or tap the icon. hold for 2sec after finished talking to properly send the audio over the internet. 4. Even if you did not activate the two-way audio function, you can receive the audio sound of the video. In addition, the microphone setting should be at least 1 or higher if you f want to use the two-way audio function. ` When there are multiple users logged on to t
ページ4に含まれる内容の要旨
7. Event List 1. Tap on the icon to see YouTube icon: 2. Tap on the to clear Tap on the YouTube the YouTube and Picasa event the event list. icon to play the YouTube links. video. Picasa icon: Tap on the Picasa icon Audio to see picture. Detection icon Motion Detection Icon Deleting Each Event ` You will get a notification prompt M when event is detected by the 1. Slide you finger right to left on camera. the event you want to delete. ` Phone does not allow you
ページ5に含まれる内容の要旨
8. Camera Setup Tap the icon to configure a camera to be monitored. 3. Configure the notification. Time setting • Push Notification : Notifies 1. Tap
