ページ1に含まれる内容の要旨
2-663-700-11 (1)
Trinitron Color TV
GB
Operating Instructions
• Before operating the unit, please read this manual thoroughly and retain
it for future reference.
RU
Инструкция по эксплуатации
• Перед работой с устройством внимательно прочтайте инструкцию
и сохраните её для дальнейшего использования.
KV-SR292
M99K
© 2005 Sony Corporation
01GB01COV-SOEMRus.p65 1 9/9/05, 5:26 PM
Sony KV-SR292M99K GRP R9 (GB, RU)_2-663-700-11 (1)
Black
ページ2に含まれる内容の要旨
WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 220 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground. • To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediate
ページ3に含まれる内容の要旨
Table of Contents Installation Menu Adjustment Securing the TV .................................... 4 Introducing the WEGA GATE navigator ............................................. 17 Getting Started ..................................... 5 “Settings” Adjustment ...................... 18 Setting up your TV (“Initial Setup”) .................................... 6 Changing the “Picture” setting ........ 19 Changing the “Sound” setting ......... 20 Changing the Picture-in-Picture Overview of Cont
ページ4に含まれる内容の要旨
Installation x Securing the TV To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV. 20 mm 3.8 mm screws clamps band Screw the band to the TV stand and to the provided hole at the rear of your TV. or (1) Put a cord or chain through the clamps. (2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV. or (1) Attach each end of a cord or chain to the provided holders at the rear of your TV. (2) Secu
ページ5に含まれる内容の要旨
Installation b b x Getting Started 1 Step 1 Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Step 2 Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tips • Your TV can receive both TV and FM radio signal from appropriate connections through the 8 (antenna input) terminal (see page 26). • You can also connect your TV to other optional components (see page 25). Step 3 Plug in the power cord, then pr
ページ6に含まれる内容の要旨
x Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel. Press V or v to select the desired menu 1 language, then press . The selected menu language appears. End Select Confirm Press V or v to select “Yes”, then press to
ページ7に含まれる内容の要旨
Installation d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, (block symbol). Then press . 1) To label, press V or v to select the alphanumeric characters for the label. Select Confirm Exit Then press . 2) To skip the program number, press V or v to select “On”. Then press . You can skip this program number when using PROG +/-. Select Confirm Exit 3) To block unwanted program number, press V or v to sel
ページ8に含まれる内容の要旨
Overview of Controls x TV front and rear panels TV rear panel qs CR RL Y CB qh 13 4 qg WEGA GATE MIC 1 MIC 2 L(MONO)2 R FM PROG qf qd TV front panel qa 0 9 87 65 4 3 2 1 WEGA GATE MIC 1 MIC 2 L(MONO) R FM PROG 2 Button/Terminal Function Page 1 ! Turn off or turn on the TV. 5 2 1 Standby indicator. 5 2 Wake Up indicator. 10 3 Remote control sensor. – 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 6 t Select TV or video input. 25 WEGA GATE menu operations 4,5 V,v,B,b Select and adju
ページ9に含まれる内容の要旨
Overview of Controls x Using the remote control and basic functions 0 qa 1 qs A/B 2 qd 1 2 3 qf 4 5 6 7 8 9 0 3 PROG 4 qg 5 qh qj 6 WEGA WEGA RETURN RETURN GATE GATE qk 7 ql 8 w; 9 TV Button Description Page 1 ?/1 Turn off temporarily or turn on the TV. – 2 a Display the TV program. – 3 Jump to last program number that has been – watched for at least five seconds. 4 PROG +/– Select program number. – 5 2 +/– Adjust volume. – 8 Change the picture size: – “On” (16:9 wide mode), “Off”. 9 Select surr
ページ10に含まれる内容の要旨
continued Button Description Page WEGA GATE menu operations 6 Confirm selected items. 17 7 WEGA GATE Display or cancel the WEGA GATE menu. qj V, v, B, b Select and adjust items. RETURN Return to the previous level. qk Timer operations qg Set TV to turn on automatically according to the – (Wake up timer) desired period of time (max. of 12 hours). The indicator on TV lights up amber once you set the wake up timer. If no buttons or controls are pressed for more than one hour after the TV is turned
ページ11に含まれる内容の要旨
Advanced Operations x Selecting the picture and sound modes You can select picture and sound modes and adjust the setting to your preference in the “Custom” option. Selecting the picture mode Press to select the desired picture mode. A/B Select To view 1 2 3 “Vivid” contrast and sharp pictures. 4 5 6 7 8 9 “Standard” normal pictures. 0 PROG “Custom” the last adjusted picture setting from the “Picture Adjustment” option in the menu (see page 19). WEGA WEGA RETURN RETURN GATE GATE TV Selecting th
ページ12に含まれる内容の要旨
x Watching Picture-in-Picture (PIP) With the PIP feature, you can display two different TV programs or video input at the same time by using the button. To Press display a sub screen . A/B To cancel the sub screen, press 1 2 3 the button again. 4 5 6 change a program number V or v. 7 8 9 in the sub screen 0 PROG swap pictures between . the main and sub screens swap sound between the B or b. main and sub screens A “ ” symbol will appear V/v/B/b next to the program WEGA WEGA GATE RETURN RETURN GA
ページ13に含まれる内容の要旨
x Enjoying the Party Mode You can sing duet along with any music program of TV broadcast or with any audio/video equipment or create visual presentations (e.g., photos or video stories) with narration and favorite background music by using the Party Mode feature. Party Mode Setup TV front panel MIC 1 Level MIC 2 Level Echo Level Vocal Reducer: Off MIC 1 MIC 2 L(MONO) R Audio Input Fix: Off 2 Reset Select Confirm End Select the input connected to your audio/video equipment. 1 Connect the micropho
ページ14に含まれる内容の要旨
x Listening to the FM Radio You are able to listen to the FM radio stations using your TV. To access to FM Radio mode: Press WEGA GATE button and select “FM Radio” (see page 17). or Press FM button on the front panel (see page 8). To exit from FM Radio mode: Press WEGA GATE button, select the desired items: “TV” or “External Inputs”, then press . Select the desired TV channel or external inputs and press . or Press FM button on the front panel. Listening to preset stations A/B Access to FM Radio
ページ15に含まれる内容の要旨
x Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. When receiving a NICAM program Broadcasting On-screen display (Selected sound) A/B NICAM Mono NICAM t A/B stereo (Regular sound) (Stereo sound) 1 2 3 4 6 5 NICAM NICAM Main NICAM Sub Mono tt bilingual (Main sound) (Sub sound) (Regular sound) 7 8 9 0 PROG NICAM Mono NICAM Main t (Regular sound) monaural (Main sound) When receiving an A2 program Broadcast
ページ16に含まれる内容の要旨
x Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. To Do this display a Teletext Press . Each time you press , the A/B A/B page on the screen changes as follows: TV picture Teletext t Teletext and TV t TV. 1 1 2 3 3 2 If there is no Teletext broadcast, “100” is 4 4 5 6 6 5 displayed at the top left corner of the 7 7 8
ページ17に含まれる内容の要旨
Menu Adjustment x Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode, Party Mode and “Settings” menu. TV WEGA GATE 01 TV 02 External Inputs “TV” watch the preset TV 03 FM Radio 04 channels (see pages 6 Party Mode 05 Settings and 12) Select Confirm Select Confirm End External Inputs 1 Video 1 select the inputs for the 2 Video 2 “External Inputs” 3 Video 3 connected equipment 4 Video 4 (see page 25) “FM
ページ18に含まれる内容の要旨
x “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press . The following is an overview of the items that can be adjusted. Picture ”Picture” (see page 19) Picture Mode: Vivid “Picture Mode”: “Vivid” “Standard” “Custom” Picture Adjustment Color Temperature: Cool “Picture Adjustment”: “Picture”, “Brightness”, “Color”, “Hue”, Intelligent Picture: On “Sharp
ページ19に含まれる内容の要旨
x Changing the “Picture” setting The “Picture” menu allows you to adjust the picture settings. Press WEGA GATE and select “Settings”. 1 Picture Make sure the “Picture” icon ( ) is 2 Picture Mode: Vivid . selected, then press Picture Adjustment Color Temperature: Cool Intelligent Picture: On Select Confirm End Press V or v to select the desired item (e.g., “Picture Mode”), then press . 3 Select To “Picture Mode” choose either “Vivid”, “Standard” or “Custom”* (see page 11). “Color Temperature” ad
ページ20に含まれる内容の要旨
x Changing the “Sound” setting The “Sound” menu allows you to adjust the sound settings. Press WEGA GATE and select “Settings”. 1 Press V or v to select the “Sound” Sound 2 Sound Mode: Dynamic icon ( ), then press . Sound Adjustment Balance Intelligent Volume: Off Surround: Off Select Confirm End Press V or v to select the desired item (e.g., “Sound Mode”), then press . 3 Select To “Sound Mode” choose either “Dynamic”, “Standard” or “Custom”* (see page 11). “Balance” Press v or B to emphasize
