ページ1に含まれる内容の要旨
BN68-00953A-00Cover.qxd 9/27/05 1:29 PM Page 1
LCD TV
LE26R53BD
LE32R53BD
-
AFTER SALES SERVICE
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other Europ
ページ2に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 2 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. • Digital Ready TV: When you Although digital broadcasting must be in the select the regular screen (4:3) wide screen (16:9) HD format, broadcasters mode to watch an SD-grade sometimes show programs made originally digital broadcast (and the Set-Top in the regular screen format (4:3) by Box output is 480p). converting the signals into digital for
ページ3に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 3 • Integrated Digital TV Although digital broadcasting must be in the (Wide-screen): When the TV wide screen (16:9) HD format, broadcasters receives SD-grade (regular) sometimes show programs made originally broadcasting signals (receives in the regular screen format (4:3) by 480p regular signals). converting the signals into digital form, in which case the left and right side edges of • Digital Ready TV (wide-screen): the screen are cropped. dig
ページ4に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 2 Contents CONNECTING AND PREPARING YOUR TV Viewing the Control Panel ......................................................................................... 5 Viewing the Connection Panel................................................................................... 6 - Connecting an Aerial or Cable Television Network ............................................... 7 - Connecting Component Devices (DTV/DVD) ..................................
ページ5に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 3 Contents SETTING THE SOUND Adjusting the Volume.............................................................................................36 Switching the Sound Off Temporarily....................................................................37 Selecting the Sound Mode ....................................................................................38 Changing the Sound Standard..............................................................
ページ6に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 4 Contents USING THE DTV FEATURE Previewing the DTV Menu System ......................................................................... 60 Basic Functions.......................................................................................................... 61 Operating the DTV Menu........................................................................................... 63 RECOMMENDATIONS FOR USE Troubleshooting: Before Contacting Service Pe
ページ7に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 5 Viewing the Control Panel SOURCE (Power) Press to turn the TV on and off. Displays a menu of all of the available input sources Power Indicator (TV, DTV, Ext. 1, Ext. 2, AV, S-Video, Component, PC, HDMI). In the on-screen menu, use this button as you Blinks and turns off when the power is on and lights up in stand-by mode. use the ENTER button on the remote control. Light Detecting Sensor MENU Adjusts brightness of screen automatically by detect
ページ8に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 6 Viewing the Connection Panel Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched off. When connecting an external device, match the colour of the connection terminal to the cable. English-6
ページ9に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 7 Viewing the Connection Panel Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting Component Devices (DTV/DVD) - Connect component video cables to component connectors (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video
ページ10に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 8 Viewing the Connection Panel Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and digital TVs). - No sound connection is needed for an HDMI to HDMI connection. What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - “Multim
ページ11に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 9 Viewing the Connection Panel TV Rear Panel CI Card Please insert the card as shown Connecting CI (Common Interface) Card - When not inserting “CI Card” in some channels, “Scramble Signal” is displayed on the screen. - The pairing information containing a telephone number, CI Card ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel
ページ12に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 4:49 PM Page 10 Viewing the Remote Control (All Functions Except Teletext) Television Standby button (Refer to page 13) Electronic Program Guide (EPG) display Selects the TV mode directly / DTV Channel list display Selects the DTV mode directly (Refer to page 51) Number buttons for direct channel access Previous channel / This key is used in the MHP application This key is the hard key for accessing and to change the previous channel. MHP Application List. T
ページ13に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 11 Viewing the Remote Control (Teletext Functions) Teletext display/mix both teletext information and the normal broadcast Teletext hold P : Teletext next page P : Teletext previous page Teletext mode selection (LIST/FLOF) Teletext reveal Teletext index Teletext size selection Teletext sub page Teletext store Teletext cancel Select the teletext mode. Teletext Function : Refer to pages 57-59 for details English-11
ページ14に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 12 Installing Batteries in the Remote Control 1 Slide the cover out completely. 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3 Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. (Assuming typical TV usage, the batterie
ページ15に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 13 Switching On and Off The mains lead is attached to the rear of your set. 1 Plug the mains lead into an appropriate socket. Result: The standby indicator lights up on the front panel. The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz. 2 Press the POWER button on the front of the panel. Result: The programme that you were watching last is reselected automatically. 3 Press the numeric button (0~9) or channel up/
ページ16に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 14 Becoming Familiar with the Remote Control The remote control is used mainly to: Change channels and adjust the volume. Set up your set using the on-screen menu system. The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the - next stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. For double digit chan
ページ17に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 15 Plug and Play When the set is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the set is in standby mode, press the POWER button on the remote control. Result: The message Start Plug & Play. is displayed. It appears for a little while, and then the Language menu is automatically displayed. 2 Select the appropriate language by pressing the or button. The avai
ページ18に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 16 Plug and Play If you want to reset this feature... 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup. Press the ENTER button. Result: The options available in the Setup group are displayed. 3 The Plug & Play is selected. 4 Press the ENTER button. Result: The message Start Plug & Play. is displayed. 5 For further details on how to set, refer to the previous page. This function does not work in PC
ページ19に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 17 Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options availabl
ページ20に含まれる内容の要旨
01 BN68-00953A-00Eng.qxd 9/27/05 1:30 PM Page 18 Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 P
