ページ1に含まれる内容の要旨
Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care center.
Contacte con SAMSUNG WORLDWIDE
Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al
Cliente.
Country Web Site Address
Customer Care Center
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
CANADA 1-800-SAMSUNG(726-7864) www.sa
ページ2に含まれる内容の要旨
Important Warranty Information Regarding Television Format Viewing Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on no
ページ3に含まれる内容の要旨
English Contents General Information Channel Control ■ List of Features ..................................................................3 ■ Managing Channels .........................................................46 ■ Accessories .......................................................................3 ■ Clearing Scrambled Channels - Digital ............................53 ■ Viewing the Control Panel .................................................4 ■ Fine Tuning Analog Channels .............
ページ4に含まれる内容の要旨
Network Settings and InfoLink Appendix ■ Network Connection - Cable ..........................................118 ■ Troubleshooting .............................................................136 ■ Network Connection - Wireless .....................................120 ■ Installing the Stand ........................................................138 ■ Network selection ..........................................................120 ■ Disconnecting the Stand .......................................
ページ5に含まれる内容の要旨
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed. • You can view News, Weather, and Stock information over the network (SAMSUNG InfoLink’s Service). • You can listen to music files and vie
ページ6に含まれる内容の要旨
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. 1 2 3 4 5 6 8 87 Front Panel buttons Touch each button to operate. ➣ The product color and shape may vary depending on the model. 1 SOURCE 5 POWER INDICATOR Blinks and turns off when the power is on and lights up Toggles between all the available input sour
ページ7に含まれる内容の要旨
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD/Blu-Ray players or a VCR. For more information on connecting equipment, see pages 9~15. [TV Side Panel] [TV Rear Panel] ➣ The product color and shape may vary depending on the model. 1 AUDIO OUT Connects to the audio input jacks on your Amplifier/Home theater. 2 DIGITAL AUDIO OUT (OPTICAL) Connects to a Digital Audio component. 3 PC IN [PC] / [AUDIO] Connect
ページ8に含まれる内容の要旨
9 POWER INPUT Connects the supplied power cord. 0 S-VIDEO Connects an S-Video signal from a camcorder or VCR. - Use the AV IN 1 [R-AUDIO-L] jacks for audio. ! COMPONENT IN 1, 2 / AV IN 1 Connects Component video/audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack. - Connect the video cable to the COMPONENT IN 1 [Y/VIDEO] jack and the audio cable to the COMPONENT IN 1 [R-AUDIO-L] jacks. @ LAN Connect a LAN cable to this port to connect to the Network (SAMSUNG InfoLink’s Serv
ページ9に含まれる内容の要旨
Remote Control You can use the remote control up to a distance of about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box). 1 POWER & PRE-CH Turns the TV on and off. Tunes to the previous channel. 2 TV * CH / CH TV VCR DVD STB Selects the TV mode directly. Press to change channels. 1 % 3 NUMERIC BUTTONS ( SOURCE Press to directly select the
ページ10に含まれる内容の要旨
Installing Batteries in the Remote Control 1. Lift the cover at the back of the remote control upward as shown in the figure. 2. Install two AAA size batteries. ➣ Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3. Replace the cover. ➣ Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remote control can be used up to about 23 feet from the TV. TV VCR DVD STB (Assuming typic
ページ11に含まれる内容の要旨
Connections Connecting VHF and UHF Antennas If your antenna has a set of leads that look like the diagram to the right, see “Antennas with 300 Ω Flat Twin Leads” below. If your antenna has one lead that looks like the diagram to the right, see “Antennas with 75 Ω Round Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”. Antennas with 300 Ω Flat T win Leads If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has 300 Ω twin flat leads, follow t
ページ12に含まれる内容の要旨
Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need ANT IN a two-way splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.) 1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box. Incoming cable ➣ This terminal might be labeled Splitter “ANT IN”, “VHF IN” or simply,
ページ13に含まれる内容の要旨
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. 1. Connect an HDMI Cable TV Side Panel DVD/Blu-Ray player or Cable Box/Satellite between the HDMI IN receiver (Set-Top Box) Rear Panel (1, 2, 3 or 4) jack on TV Rear Panel the TV and the HDMI jack on the DVD/Blu- Ray player or Cable Box/Satellite receiver (Set-Top Box). HDMI Cable (Not supplied) or ➣ What is H
ページ14に含まれる内容の要旨
Connecting a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD/Blu-Ray player or Cable Box/Satellite receiver (Set-Top Box) to your TV. 1. Connect a Component TV Rear Panel Cable between the COMPONENT IN DVD/Blu-Ray player or Cable Box / (1 or 2) [Y, PB, PR] Satellite receiver (Set-Top Box) jacks on the TV and the COMPONENT [Y, PB, PR] jacks on the DVD/Blu-Ray player or Cable Box/Satell
ページ15に含まれる内容の要旨
Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 9~10). Skip step 1 if you have not yet connected to an antenna or a cable system. 1. Unplug the cable or antenna from the back ANT IN of the TV. 2. Connect the cable or antenna to the ANT IN terminal on the back of the VCR. 3. Connect an RF Cable TV Side Panel between the ANT OUT TV Rear Panel terminal on the VCR
ページ16に含まれる内容の要旨
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. 1. Connect an Optical Cable TV Rear Panel between the “DIGITAL AUDIO Digital Audio System OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System. When a Digital Audio System is connected to the “DIGITAL AUDIO OUT (OPTICAL)” jack: Decrease the volume of the TV and adjust the volume Optical Cable (Not s
ページ17に含まれる内容の要旨
Connecting a PC Using the D-Sub Cable 1. Connect a D-Sub Cable TV Rear Panel between PC IN [PC] connector on the TV and the PC output PC connector on your computer. 2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your computer. 2 PC Audio Cable (Not supplied) D-Sub Cable (Not supplied) 1 Using the HDMI/DVI Cable 1. Connect an HDMI/DVI cable TV Rear Panel between the HDMI IN 2 jack on the TV and the PC output jack on
ページ18に含まれる内容の要旨
Operation Turning the TV On and Off Press the POWER button on the remote control. TV VCR DVD STB You can also use the POWER button on the TV. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently. 1. Press the POWER button on the remote control. Plug & Play The message “Menu Language, Store Demo, Channels and Time will be set.” Menu Language, Store Demo, Channels, and Time will is displayed. be set. Press the ENTER button, then “Sel
ページ19に含まれる内容の要旨
Setup 5. The TV will begin memorizing all of the available channels. Plug & Play ➣ To stop the search before it has finished, press the ENTER button with Removing scrambled channel. “Stop” selected. DTV Air : 05 Air : 12 DTV Cable : 25 Cable : 32 DTV Cable 41 After all the available channels are stored, it starts to remove scrambled 77% channels (see page 53). And then, the Auto program menu reappears. Press Stop the ENTER button when channel memorization is complete. The message “Set t
ページ20に含まれる内容の要旨
TV VCR DVD STB TV VCR DVD STB Changing Channels Using the Channel Buttons 1. Press the CH or CH button to change channels. ➣ When you press the CH or CH button, the TV changes channels in sequence. You will see all the channels that the TV has memorized. (The TV must have memorized at least three channels). You will not see channels that were either erased or not memorized. See page 20 to memorize channels. ➣ To increase the channel number, turn the wheel clockwise when the Channel Di
