ページ1に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 1
OWNER'S MANUAL
CIWL2606
26 INCH
ANALOG / DIGITAL
LCD TELEVISION
HIGH-DEFINITION TELEVISION
TO RECEIVE ANALOG/DIGITAL SIGNAL
YOU MUST CONNECT ANTENNA
IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER
READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045,
OR VISIT OUR WEB SITE AT http://www.funai-corp.com
ページ2に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 2 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. THIS SYMBOL INDICATES THAT DANGER- CAUTION OUS VOLTAGE CONSTITUTING A RISK OF RISK OF ELECTRIC SHOCK ELECTRIC SHOCK IS PRESENT WITHIN DO NOT OPEN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELEC- THIS SYMBOL INDICATES THAT THERE TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). ARE IMPORTANT OPERATING AND MAIN- NO USER SERVICEABLE PARTS INSIDE. REFER TEN
ページ3に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 3 17. OBJECT AND LIQUID ENTRY - Never push objects of any kind into 20. REPLACEMENT PARTS - When replacement parts are required, be sure the this TV through openings as they may touch dangerous voltage points or service technician uses replacement parts specified by the manufacturer that short out parts that could result in a fire or electric shock. Never spill liq- have the same characteristics as the original part. Unauthorized substitutions uid of a
ページ4に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 4 SUPPLIED ACCESSORIES • Owner’s Manual • Remote control unit • Batteries (1EMN21896) (NF009UD) (“AA” x 2) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our help line mentioned on the front page. • Depending on your antenna system, you may need different types of Combiners (Mixer) or Separator (Splitter). Contact your local electronics store for these items. FEATURES • DTV/TV/CATV This TV lets
ページ5に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 5 ONTENTS C IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 FE
ページ6に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 6 UNCTIONS F REMOTE CONTROL, TOP AND REAR PANEL FUNCTION SLEEP button (p23) INPUT SELECT button (p20) To turn the power off automatically at To select TV or external input mode (to INPUT preset time. access DVD, VCR, etc.). POWER SLEEP SELECT POWER button (p12) AUDIO button (p19) To turn TV on/off. • Analog mode (TV) 1 2 3 To select audio mode. Channel number buttons (p18) • Digital mode (DTV) To select channels. 4 5 6 To select audio language. AUDIO S
ページ7に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 7 ANT. IN jack AUDIO OUT jacks Connect your antenna or cable Audio cable connection for external box here. audio equipment. Use AUDIO IN jacks of external equipment. DIGITAL AUDIO OUT ANT. IN (COAXIAL) jack L L HDMI IN jacks AUDIO OUT AUDIO Connect an optional coaxial digi- Connect HDMI cable and audio DIGITAL HDMI IN AUDIO OUT R R tal audio cable here through the (COAXIAL) cable coming from the HDMI and HDMI coaxial digital audio in jack of a audio o
ページ8に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 8 REPARATION FOR USE P CONNECTION This section describes how to connect this TV to reception and other sources. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive digital signal. NOTE: Be sure that antenna or cable is connected properly before plugging the power cord. [ANTENNA CABLE CONNECTION] 1) When connecting TV to antenna Connect the RF cable or antenna cable on your home outlet to the ANT. IN jack
ページ9に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 9 EXTERNAL CONNECTION [HDMI CONNECTION] 1) This is the best method to connect this TV to video devices with the HDMI output jack, such as DVD play- er with HDMI output jack, etc. It can minimize the deterioration of image quality. Use the HDMI cable (commercially available) for connection. To HDMI IN jack HDMI OUT ANT. IN L L AUDIO OUT AUDIO DIGITAL To HDMI output jack HDMI IN AUDIO OUT R R (COAXIAL) DVD Player with the HDMI output jack HDMI Cables not
ページ10に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 10 [COMPONENT CONNECTION] 1) This is a better method to connect this TV to video devices with the Component output jack, such as DVD player, etc. Use the Component cable (commercially available) for connection. If you connect component output jack to COMPONENT1 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT1. If you connect component output jack to COMPONENT2 input jack, connect an audio cable to AUDIO L/R jacks of COMPONENT2. To CO
ページ11に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 11 [ANALOG AUDIO/VIDEO CONNECTION] 1) This is the general method to connect this TV to video devices with the video and audio output jacks, such as VCR, Camcorder, Video Game, etc. When the audio jack of video devices is monaural, connect this TV to the AUDIO L jack. To VIDEO1 input jack To video output Y Y VIDEO VIDEO jack AUDIO VIDEO Pb Pb OUT OUT L L L L Camcorder Video Game S-VIDEO1 AUDIO Pr AUDIO Pr AUDIO AUDIO R R R R To audio output S-VIDEO2 jac
ページ12に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 12 NITIAL SETTINGS I Hint: Before starting initial setup you must connect antenna. INITIAL SETTINGS K L 3 Select your language using [ / ], press [ENTER]. This section describes the initial settings when you When you first turn on the power, the following first turn on the power after purchase. The initial screen is displayed. setting items are shown below. Initial Setup Initial Setup • LANGUAGE SELECTION Select the language for setup display. English
ページ13に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 13 HANNEL SETTINGS C AUTOSCAN K L 3 For TV channels, using [ / ], select “Air”. If you switch wires (e.g. between antenna and For CATV channels, select “Cable”. CATV) or if you move the TV to a different area A Autoscan utoscan after the initial setting, you need to perform Back Autoscan will rescan all channels. This may take a while to complete. Autoscan again. This function lets you easily select Air Select the destination of "ANT. IN" jack. Cable K
ページ14に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 14 CHANNEL LIST 3 Select the channel you want to skip. K L The Channel List function lets you skip the unnec- • Using [ / ], select the channel. essary channels from the Channel registration list. Channel List Channel List STILL Highlight channels for DTV DTV 6 6 - 0 Ch Up/Down key selection. DTV DTV 8 8 SCREEN 9 SETUP SETUP MODE 9 27 DTV DTV 48 48 58 58 DTV 67 ENTER ENTER BACK ENTER Ch Select Watch/Skip Back INFO BACK CH RETURN • Press [ENTER], and th
ページ15に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 15 MANUAL REGISTER 3 Select the channel you want to add. • Using Channel number buttons, select your You can register remainder of channels that were desired channel. not scanned by the Autoscan function due to the bad reception status at the initial setting. 11 INPUT Manual Register Manual Register POWER SLEEP SELECT For Analog channels, Register select a channel to register using number keys. For Digital channels, 1 1 2 2 3 3 you must perform Autosc
ページ16に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 16 • If the channel is set to external input, you can- ANTENNA CONFIRMATION not confirm the antenna situation. You can verify the signal strength of each channel Video1 to get a clearer picture. Antenna Antenna Back INPUT POWER SLEEP SELECT Indicator is available for antenna signal only. 1 1 2 2 3 3 4 4 5 5 6 6 CH Ch Change AUDIO 7 7 8 8 9 9 STILL 3 To exit the setup, press [SETUP]. - - 0 0 SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN VOL.
ページ17に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 17 LANGUAGE SELECTION You can choose your on screen language from one of the following English, Spanish or French. STILL - 0 SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN VOL. CH MUTE 1 Display the setup screen. • Press [SETUP]. The following setup screen is displayed. 2 Select “LANGUAGE” and press [ENTER] to con- firm. K L • Using [ / ], select “English”, “Español” or “Français”. Langua Languag ge e Select the language for setup display. Eng
ページ18に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 18 ATCHING TV W NTSC ATSC 18:00 CHANNEL SELECTION CH4-1 No signal No signal K L You can select the channel by using either [CH / ] 18:30 or Channel number buttons. How to select the CH4-1 CH4-2 CH4-3 channel in each way is shown below. CH4 19:00 INPUT POWER SLEEP SELECT CH4-1 No signal CH4-3 19:30 1 1 2 2 3 3 CH4-1 CH4-2 No signal 4 4 5 5 6 6 20:00 AUDIO : change automatically 7 7 8 8 9 9 STILL : change manually by pressing [CH / ] - - 0 0 on
ページ19に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 19 When the broadcasting has SAP and stereo STILL MODE audio... SAP / STEREO SAP / STEREO You can freeze the image shown on the screen. When the broadcasting has SAP and monaural 1 2 3 audio... 4 5 6 SAP / MONO SAP / MONO AUDIO 7 8 9 STILL STILL When the broadcasting is having only monaural - 0 audio... SCREEN SETUP MODE MONO (cannot be switched.) STEREO : Outputs stereo-audio 1 Pausing image. SAP : Outputs second audio program • Press [STILL], the ima
ページ20に含まれる内容の要旨
L4303CD_CIWL2606.qx4 06.12.21 18:32 Page 20 SWITCHING EXTERNAL INPUT • When you press [INFO], the current external input mode, the type of resolutions for video When you connect external devices including a signal, TV aspect ratio, CC and TV rating will video cassette recorder and home audio system, be displayed at the top-right of the screen. you can easily switch the input mode with the remote control. 1) When using VIDEO1 or S-VIDEO1 input jack INPUT INPUT POWER SLEEP SELECT SELECT Video1
