ページ1に含まれる内容の要旨
Platform: DBALL
Firmware: CHRYSLER Remote Start Ready Installation
Rev.: 20120307
Update Alert: Firmware updates are posted on the web on a regular basis. We recommend
that you check for firmware and/or install guide updates prior to installing this product.
Installation Guide
This guide supports the installation of a DBALL in Remote Start Ready (RSR) mode with or without a
Plug & Play (CHTHD1 or CHTHD2) T-Harness (Optional). This solution offers three (3) configuration
options to control your s
ページ2に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 2 Important Information 3x OEM Lock Remote Start Activation This feature enables you to start/stop the vehicle using the OEM remote. Press the OEM remote LOCK button three (3) times within three (3) seconds to start the vehicle. To stop the vehicle, press the LOCK button three (3) more times. The OEM remote lock and unlock functions are inactive when the key is inserted into the ignition; therefore, the 3x OEM
ページ3に含まれる内容の要旨
(+) Start, Pin 4 No Start wire Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 3 Vehicle Application Guide Vehicles Chrysler 200 3 ••••• ••• •••••••••••••• 300/300c 2 2 2 •••••• •• ••••••••••••••• 300/300c 4 4 4 ••••• ••• •••••••••••••• Aspen 3 3 3 ••••• ••• •••••••••••••• Pacifica 5 5 5 5 5 ••••• ••• •• •••••••• •• PTCruiser 4 4 4 4 4 ••••• •• •••••••••••••• Sebring 3 3 3 3 ••••• ••• •••••••••••••• SebringConvertible 3 3 3 ••••• ••• •••••••••••••• SebringS
ページ4に含まれる内容の要旨
10 4 14 12 2 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 4 Installation Type 1a (with T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Ground (+)12v OR Prog
ページ5に含まれる内容の要旨
10 4 14 12 2 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 5 Installation Type 1b (without T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Ground (+)12v OR L
ページ6に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 6 Parking Light Vehicle Wiring Reference Chart (Type 1) Light switch, DBALL Output from Vehicle Years Vehicle Wire Location on vehicle (+) / (-) black 10-pin plug 12 Pin connector Chrysler 8: Violet/Green: Parking Light MUX Town & Country 2011+ White/Green Black connector at light switch, pin 3 MUX 9: Violet/Brown: Parking Light MUX 8: Violet/Green: Parking Light MUX Town & Country 2008-10 White/Brown Black co
ページ7に含まれる内容の要旨
10 4 14 12 2 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 7 Installation Type 2a (with T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Ground (+)12v OR LED
ページ8に含まれる内容の要旨
10 4 14 12 2 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 8 Installation Type 2b (without T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Ground (+)12v OR P
ページ9に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 9 Parking Light Vehicle Wiring Reference Chart (Type 2) Light switch, DBALL Output from Vehicle Years Vehicle Wire Location on vehicle (+) / (-) 12 Pin connector black 10-pin plug Chrysler 8: Violet/Green: Parking Light MUX 300/300c 2008-10 White/Brown Black connector at light switch, pin 1 MUX 9: Violet/Brown: Parking Light MUX Dodge 8: Violet/Green: Parking Light MUX Charger 2008-10 White/Brown Black connect
ページ10に含まれる内容の要旨
10 4 14 12 2 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 10 Installation Type 3a (with T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Ground (+)12v OR LED
ページ11に含まれる内容の要旨
10 4 14 12 2 4 CAN Low, Pin 7 CAN High, Pin 6 4 (+) Ignition, Pin 3 MUX, Pin 1 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 11 Installation Type 3b (without T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration W
ページ12に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 12 Parking Light Vehicle Wiring Reference Chart (Type 3) Vehicle Years Wire (+) / (-) Location Chrysler 200 2011 White/Violet (+) Driver kick panel Aspen 2007-09 Pink/Red (+) Driver kick fuse box, black 40-pin plug, pin 6 Sebring 2007-10 White/Violet (+) Driver kick panel Sebring Convertible 2008-10 White/Violet (+) Driver kick panel Sebring Sedan 2007-10 White/Violet (+) Driver kick panel Dodge Avenger 2008-1
ページ13に含まれる内容の要旨
10 4 14 12 2 4 (+) Start, Pin 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 13 Installation Type 4a (with T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (Gray & White) Connect Gray wire to (-) Gro
ページ14に含まれる内容の要旨
10 4 14 12 2 CAN Low, Pin 7 4 CAN High, Pin 6 Violet/Brown, Pin 2 (+) Ignition, Pin 3 4 (+) Start, Pin 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 14 Installation Type 4b (without T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. s
ページ15に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 15 Parking Light Vehicle Wiring Reference Chart (Type 4) Vehicle Years Wire (+) / (-) Location Chrysler 300/300c 2005-07 White/Violet (+) Passenger kick panel PT Cruiser 2006-10 White/Violet (+) Driver kick panel Dodge Caliber 2007-11 White/Violet (+) Driver kick panel Charger 2006-07 White/Violet (+) Passenger kick panel Magnum 2005-07 White/Violet (+) Passenger kick panel RAM 2006 White/Gray (+) Above driver
ページ16に含まれる内容の要旨
10 4 14 12 2 Violet/Brown, Pin 2 (+) Ignition, Pin 3 (+) Start, Pin 4 4 4 Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 16 Installation Type 5 (without T-Harness) Important! The Hood Pin and Neutral Safety Switch are mandatory security devices, but are NOT supplied with the DBALL. The optional XL202 and antenna are not included and MUST be SmartStart is optional and not included. It MUST be purchased purchased separately. separately. Configuration Wires (
ページ17に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 17 Parking Light Vehicle Wiring Reference Chart (Type 5) Headlight switch, black 12-pin plug Vehicle Years Wire (+) / (-) Location Chrysler Pacifica 2004-08 Brown/White (-1K) MUX Headlight switch, black 12-pin plug, pin 6 Town & Country 2004-07 White/Orange (+) Driver kick panel 1 2 3 4 5 6 Dodge Caravan 2004-07 White/Orange (+) Driver kick panel 7 8 9 10 11 12 Grand Caravan 2004-07 White/Orange (+) Driver kic
ページ18に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 18 Module Programming for Installation Types 1 to 4 (WITH Factory Keyless) Refer to the LED Diagnostics section on page 23 for more information and for troubleshooting purposes. Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. Note: Before connecting either
ページ19に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 19 Module Programming for Installation Types 1 to 4 (WITHOUT Factory Keyless) Refer to the LED Diagnostics section on page 23 for more information and for troubleshooting purposes. Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. Note: Before connecting eith
ページ20に含まれる内容の要旨
Platform: DBALL Firmware: CHRYSLER Remote Start Ready Installation Rev.: 20120307 Page 20 Module Programming for Installation Type 5 Refer to the LED Diagnostics section on page 23 for more information and for troubleshooting purposes. Important Make all the required connections to the vehicle, as described in the wiring diagram(s) found in this guide, and double check to ensure everything is correct prior to moving onto the next step. Note: Before connecting either the XL202 or SmartStart modul
