ページ1に含まれる内容の要旨
Español Français English
LCD Television Built-in
DVD Player Users Guide
19" class (18.5" Diagonal)
LT-19D200
HIGH DEFINITION TELEVISION
Important Note:
In the spaces below, enter the model and serial number of your television (located at the rear of the television cabinet). Staple your
sales receipt or invoice to the inside cover of this guide. Keep this user’s guide in a convenient place for future reference. Keep the
carton and original packaging for future use.
Model No:
Serial Number:
0
ページ2に含まれる内容の要旨
Precautions WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE. APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE APPARATUS. The lightning flash with arrowhead symbol, within an CAUTION equilateral triangle, is intended to alert the user to the RISK OF ELECTRIC SHOCK presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be
ページ3に含まれる内容の要旨
English This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided. Make sure to leave a space of 2.8 inches (7cm) or more around this apparatus. Disconnect the mains plug to shut off when find trouble or not in use. The mains plug shall remain readily operable. CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. WARNING: Batteries (battery pack or battery installed)
ページ4に含まれる内容の要旨
fr front side ont side NTRODUCTION I Supplied Accessories remote control batteries (AA x 2) Screw for attaching the (RM-C-2152) stand x 3 (FPH34120) • If you need to replace these accessories, please refer to the part No. with the illustrations and call our toll free customer support line found on the cover of this manual. Attaching the Stand You must attach the stand to the unit to have it as a table top unit. Be sure the front and rear of the stand match the proper direction. Spread a
ページ5に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION English Features TV DVD • DTV/TV/CATV • Dolby Digital Sound - You can use your remote control to select - Enjoy Dolby Digital multi-channel surround sound channels which are broadcast in digital format and when you connect the unit to your Dolby Digital conventional analog format. Also, cable subscribers decoder. can access their cable TV channels. • Still / Fast / Slow / Step Play
ページ6に含まれる内容の要旨
NTRODUCTION I Contents Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 DVD Functions Trademark Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 OPERATING DVD INTRODUCTION Playable Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unplayable Media . . . . . . . . . . . . . .
ページ7に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION English 1. y (power) (p. 15) Control Panel Press to turn the unit on and off. 2. B (play) (p. 36) Press to begin the disc playback. 3. C (stop) (p. 36) Press to stop the disc playback. 4. A (eject) (p. 36) Press to eject the disc. 5. CH - / + (p. 16 / p. 17) Press to select channels or move up (+) / down (-) through the main menu items. 6. SETUP (p. 15 / p. 44) Press to display the main
ページ8に含まれる内容の要旨
NTRODUCTION I Remote Control Function 1. MUTE (p. 16) Press to turn the sound on and off. 13 2. Number buttons (p. 16) 14 1 • Press to select channels. • Press to select chapter, title (DVD), or track (CD) 15 directly. - (hyphen) 16 2 • Press to shift the subchannel from the main channel. +10 button 17 • Press to select 10 or higher number of chapters. 3. SETUP (p. 15 / p. 44) Press to display the main menu. K L 4. s / B / / (p. 15) 3 18 Press to move left / right / up / down
ページ9に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION English 10. EJECT A (p. 36) 23. PAUSE F (p. 17) Press to eject the disc. TV mode 11. DISC MENU (p. 36) • Press to pause screen image. Press to display the menu on the disc. DVD mode 12. TITLE (p. 36) • Press to pause the disc playback. Press to display the title menu (DVD). 24. CLEAR (p. 39) 13. INPUT SELECT (p. 17) • Press to clear the numbers entered incorrectly. Press to access
ページ10に含まれる内容の要旨
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. Before you connect... Be sure your antenna or other device is connected properly before plugging in the AC power cord. Antenna Connection Connect the RF coaxial cable on your home outlet to the antenna input jack of this unit. rear of this unit e.g.) VHF / UHF antenna RF c
ページ11に含まれる内容の要旨
INTRODUCTION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION PREPARATION English No supplied cables are used in this connection: Please purchase the necessary cables at your local store. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for the better compatibility. External Device Connection [HDMI Connection] HDMI connection offers the highest picture quality. HDMI (High-Definition Multimedia Interface) transports high definition vi
ページ12に含まれる内容の要旨
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Component Video Connection] RCA component video connection offers better picture quality for video devices connected to the unit. If you connect to the unit’s component Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Component Video connector. e.g.) rear of this unit (green) (blue) (red) Y Pb/Cb Pr/Cr COMPONENT VIDEO OUT T TLE 5 CHAP ER 15
ページ13に含まれる内容の要旨
INTRODUCTION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION PREPARATION English No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [Video Connection] RCA video connection offers standard picture quality for video devices connected to the unit. If you connect to the unit’s Video Input jack, connect RCA audio cables to the Audio L/R jacks below the Video connector. When the audio jack of the video device is
ページ14に含まれる内容の要旨
REPARATION P No supplied cables are used in this connection: Please purchase the necessary cables at your local store. [PC Connection] This unit is equipped with a PC input jack. If you connect this unit to your PC, you can use this unit as a PC monitor. Use an VGA cable for this connection and it requires stereo mini plug audio cable as well. e.g.) rear of this unit VGA cable VGA cable should be with ferrite core. personal computer stereo mini plug audio cable The following signals can be dis
ページ15に含まれる内容の要旨
INTRODUCTION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION PREPARATION English These operations are accessible by remote control. Some may also be accessible by controls on the main unit. TV Functions Initial Setup This section will guide you through the unit’s initial setting which includes Use [Cursor s / B] to select the desired location setting, 4 selecting a language for your on-screen menu and autoscan, which then press [ENTER]. automatically scans
ページ16に含まれる内容の要旨
ATCHING TV W Channel Selection Volume Adjustment Select channels by using [CHANNEL - / +] or [the Number buttons]. This section describes how to adjust the volume. The mute function, which turns the sound off and on, is also described. • To select the memorized channels, use [CHANNEL - / +] or [the Number buttons]. • To select the non-memorized channels, use Use [VOLUME - / +] to adjust the audio volume. [the Number buttons]. Volume 30 To Use [the Number buttons] TV - When select
ページ17に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION English Still Mode Switching Audio Mode You can pause the image shown on the TV screen. This section describes how to switch the audio in the analog mode and how to switch the audio language in the digital mode. TV Press [PAUSE F] to pause the image shown on the TV Press [AUDIO] to display the currently selected screen. audio mode. While receiving an MTS broadcast, press repeated
ページ18に含まれる内容の要旨
ATCHING TV W TV Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. DTV TV In the digital mode, the detailed broadcasting information for the current In the analog mode, the current channel number and the audio mode are channel such as program title, program guides are displayed. displayed. Press [INFO] to display the details of the currently Press [INFO]. selected program. 11 SAP / STEREO 480i 80 SD D 4:3 43
ページ19に含まれる内容の要旨
INTRODUCTION PREPARATION WATCHING TV OPTIONAL SETTING OPERATING DVD DVD SETTING TROUBLESHOOTING INFORMATION English TV Screen Display Mode 4 types of display modes can be selected when the broadcasting station is sending 4:3 or 16:9 video signal. And 3 types of display modes can be selected for PC input signal. Press [SCREEN MODE] repeatedly to switch the TV aspect ratio. For 4:3 video signal For 16:9 video signal Sidebar Full Full Zoom Wide Cinema Expand Cinema Sidebar Full Display a 4
ページ20に含まれる内容の要旨
PTIONAL SETTING O Main Menu Autoscan This section describes the overview of the main menu displayed when you If you switch wires (e.g., between antenna and CATV) or if you move the press [SETUP]. For more details, see the reference page for each item. unit to a different area after the initial setting, or if you restore the DTV The main menu consists of the function setting items below. channel you deleted, you will need to perform autoscan. Before you begin: Make sure the unit is connect
