ページ1に含まれる内容の要旨
Recording Server Software
VN-RS800U Viewer User’s Guide
LST0574-001C
ページ2に含まれる内容の要旨
Getting Started Thank you for using the VN-RS800U recording server software (henceforth VN-RS800). The VN-RS800 recording server is comprised of the various groups of services that provide the different functions, the [VN-RS800Viewer] viewer application software, and the [VN-RS800Setup] setup tool. This user’s guide provides descriptions on the operating procedures of the VN-RS800Viewer. Refer to the “VN-RS800 Setup Manual” for procedures on installing and setting up the VN-RS800
ページ3に含まれる内容の要旨
Please carefully read this End-User License Agreement ("Agreement") before installing or using the Recording Server Software [VN-RS800] ("Software") on your PC. The right to use the Software is granted by Victor Company of Japan, Limited ("JVC") to You only on the condition that You agree to the following Agreement. If You do not agree to the terms of the Agreement, you may not install the Software. INSTALLING OR USING THE SOFTWARE INDICATES YOUR ACCEPTANCE OF THESE TERMS AND CONDITIONS. T
ページ4に含まれる内容の要旨
You agree that You will not ship, transfer or export the Software or underlying information and technology to any countries to which Japan and other relevant countries embargoed goods. 8.U.S. Government User If You are an agency of the United States of America (the "Government"), You acknowledge JVC's representation that the Software is a "Commercial Item" as defined in Federal Acquisition Regulation (FAR) part 2.101 (g) consisting of unpublished "Commercial Computer Software" as those it
ページ5に含まれる内容の要旨
Content 1. Starting Up the VN-RS800Viewer.................................................................................................................. 6 1.1. Login .............................................................................................................................................................6 1.2. User Authorization ........................................................................................................................................6 2. Dis
ページ6に含まれる内容の要旨
1. Starting Up the VN-RS800Viewer 1.1. Login Double-click the VN-RS800Viewer icon on the Desktop screen, or click [Start] – [Programs] – [JVC] – [VN-RS800] – [VN-RS800Viewer] to start the VN-RS800Viewer. Select a user name, enter the password, and click the [OK] button. The application is launched upon verifying the user. When entering the password, pressing the [input] button displays the software keyboard for entering the password. To use this screen, make sure to set a password usi
ページ7に含まれる内容の要旨
2. Displaying Live Video Images 2.1. Live Video Image Display Click the [Live Cam] button on the top left of the screen to switch to the [Live Mode]. Doing so displays the current image of the specified camera. Information such as “time, camera name, and the ‘Recording’ mark” can be displayed on the images. Clicking the [Info] button on the top right of the screen switches display of the information in the following order. “Display ’Recording’ mark only” → “Display ’Recording’ mark an
ページ8に含まれる内容の要旨
2.2. Video Image Layout Use the “Select Video Layout Button” at the bottom left of the screen to select a layout according to the number of video images you want to display. Upon clicking a video image screen, its frame will appear in green. This indicates that the image is selected (henceforth referred to as the selected camera). Clicking each of the layout buttons changes the number of video images. Page including the selected camera is displayed. When in the 5-screen or 12-screen mode,
ページ9に含まれる内容の要旨
3. Playing Recorded Video Images 3.1. Playback of Recorded Video Images Click the [View Records] button on the top left of the screen to switch to the [Play Mode]. The Play button can be clicked only when a camera is selected. Clicking the button plays back video images recorded in the selected camera. View Records Button Alarm Button Playback Start Time Specification Area Playback Range Specification Area Playback Control Area Change Camera / Alarm Search Area Play Mode Screen
ページ10に含まれる内容の要旨
3.2. Playback Start Time Click the [Present Time] button to start playback of the latest recorded video images. * Note: The latest recorded video images are about 40 seconds before the system time. Click the [Specified Time] button to display the “Specify Playback Start Time Screen”. Specified Time Button Present Time Button Playback Start Time Specification Area Enter the time and click the [OK] button to start playback from the specified time. Present Time Button Clear All
ページ11に含まれる内容の要旨
3.3. Playback Range Operate the playback range accordingly to play back the video images of a specific time that you want to view. The [Playback Range (10 min / 1 Hour / 1 Day)] buttons are used to select the range of the seek bar. For example, when 1 hour is selected, the time range from the left to the right end of the seek bar represents a duration of 1 hour. The [Skip Range (Previous/Next)] buttons are used to slide to the previous or next seek bar range. For example, when the seek b
ページ12に含まれる内容の要旨
3.4. Playback Operation This is used to control playback operations. * The [Playback Speed Slider] is used to specify the speed during “Playback/Reverse Playback”. * Click the [Playback/Reverse Playback] button to start playback. * Click the [Pause] button to pause the playback. * Click the [Next/Previous Frame] button to display and pause the next image. * Note: When there are no recorded images over an interval of a few seconds, a message indicating that there is no image will appear
ページ13に含まれる内容の要旨
3.5. Switching Camera Selection When the [Camera/Search List] button is displayed as “Search List”, the camera list is displayed in the list display area. Select the camera list and click the [Change Camera] button to switch the selected camera. Use the [List Operation] buttons to select the camera list. * Note: To start playback, specify a time, followed by performing the playback operation. List Display Area Change Camera / Alarm Search Area Change Camera Button List Operation Bu
ページ14に含まれる内容の要旨
4. Controlling the Camera 4.1. Camera Control Click the [Camera] button on the top left of the screen to switch to the [Camera Control Mode]. The [Camera] button can be clicked only when a camera is selected. * Note: Functions that are controllable vary with the camera type of the selected camera. Camera Button Alarm Button Touch Control Button Camera Control Mode Screen Position Selection Area Touch Control Area Other Control Functions Area Change Camera/Alarm List Area
ページ15に含まれる内容の要旨
4.2. Touch Control Upon clicking the [Touch Control] button, the frame indicating the “Direction Control Area”, “Tilt Button”, “Pan Button”, “Zoom Area”, “Zoom In Button” and “Zoom Out Button” appears on the image. Using this enables easy control of the camera’s orientation and zoom functions. *Direction → Drag within the [Direction Control] area and the direction of the camera will make the corresponding adjustments automatically. The camera turns horizontally continuously when the “P
ページ16に含まれる内容の要旨
4.3. Position Selection Position selection is enabled when the VN-C30/C625/C655/E4/A1(With Dome Camera) cameras are selected. *[Home] button → Home position *[Skip Position (Previous)] button → Previous position *[Skip Position (Next)] button → Next position Direct Specification Click the [Direct] button to switch to the “Direct Mode”. Use the numeric keys to move to the specified position. Use this method for specifying a position between position numbers “1” to “9”. Skip Posit
ページ17に含まれる内容の要旨
4.4. Other Controls *Focus [Auto] button → For adjusting the focus automatically. [Near] button → For adjusting the focus towards the “Near” end. Press to start and release to stop. [Far] button → For adjusting the focus towards the “Far” end. Press to start and release to stop. *Auto pan [ON] button → For turning on the auto pan mode. [OFF] button → For turning off the auto pan mode. 4.5. Switching Camera Selection This allows switching of the selected camera in the sam
ページ18に含まれる内容の要旨
5. Emergency Recording 5.1. Emergency Recording Click the [Emergency Recording] button to start emergency recording of “all currently displayed live video images” and the “selected camera”. *Live Mode → Emergency recording of “all currently displayed live video images” *Camera Control Mode → Emergency recording of the “selected camera” If a camera is selected during the start of emergency recording, the “remaining time” of emergency recording will be displayed. Click the [Stop E
ページ19に含まれる内容の要旨
6. Receiving Alarms 6.1. Alarm Reception When an alarm is received, the [Alarm] button on the top of the screen starts blinking and the alarm information is displayed. Blinking will continue for 30 seconds. When displaying live video images of the “Recording Camera” in the alarm event settings, alarm information is also displayed on the image. This display will remain displayed over the interval specified in the “Alarm Display Time” of the alarm event settings. Date/Time Camera Name
ページ20に含まれる内容の要旨
6.3. Alarm Search Set to the “Play Mode” to search previous alarms. When the [Camera/Search List] button is displayed as “Camera List”, the search list is displayed in the list display area. *Note: Clicking the [Camera List] button switches the list display area to the camera list. Clicking the [Search List] button restores the list display area to the search list. List Display Area View alarm Button Search Button Condition Setting Button Camera Switch / Alarm Search Area List Oper
