ページ1に含まれる内容の要旨
PLASMA TV
OWNER’S MANUAL
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this infor-
mation to your dealer when you require service.
Model number :
Serial number :
P/NO : 3828VA0525T (MF056A, 151E/138P TX)
ページ2に含まれる内容の要旨
Safety Warnings Safety Instructions Safety Instructions W WARNING Do not place the set in direct sunlight or near heat Do not insert any object into the exhaust vent. - This may cause a fire or could give an electric shock. sources such as heat registers, stove and so on. - This may cause a fire. Do not place heavy objects on the set. Do not use the set in damp place such as a bathroom - This may cause serious injury to a child or adult. or any place where it is likely to get wet. - This may cau
ページ3に含まれる内容の要旨
Safety Warnings Safety instructions have two kinds of information, and each meaning of it is as below. * The violation of this instruction may cause serious injuries and even death. WARNING The violation of this instruction may cause light injuries or damage of the NOTES product. Take care of danger that may happen under specific condition. NOTES Never touch the power plug with a wet hand. Ensure the power cord doesn’t trail across any hot - This may cause an electric shock. objects like a heate
ページ4に含まれる内容の要旨
Contents Contents Contents Time Menu Options Safety Warnings Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . .19 Safety Instructions . . . . . . . . . . . . . . . . . . . . . . .2~3 Setting the On/Off Timer . . . . . . . . . . . . . . . . . . .19 Introduction Auto Sleep . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Remote Control Key Functions . . . . . . . . . . . . . .5~6 Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19 Location and Func
ページ5に含まれる内容の要旨
MUTE PIP PR - EXIT VCR STB I/II ZOOM + LIST PIP PR + Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control aim it at the remote control sensor of the set. - There's maybe a defect in consecutive operation of remote control in specified brightness according to this set feature. POWER INPUT switches the set on from standby or off to Selects the TV, AV, Component, RGB or HDMI modes. INPUT MULTIMEDIA standby. switches the set on from standby. POWER MU
ページ6に含まれる内容の要旨
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control aim it at the remote control sensor of the set. - There's maybe a defect in consecutive operation of remote control in specified brightness according to this set feature. MUTE POWER Switches the sound on or off. switches the set on from standby or off to standby. MULTIMEDIA MUTE POWER Selects the Component, RGB or I/II HDMI modes. Selects the language during dual lan- switches the set on from s
ページ7に含まれる内容の要旨
Introduction Location and Function of Controls Location and Function of Controls 42PX4R series 7 8 TV/AV MENU OK VOL PR INPUT MENU OK VOL PR 2 1 3 4 5 6 42PX3RV series TV/AV MENU OK VOL PR VOL INPUT MENU OK PR 2 7 1 3 4 5 6 1. Power Button 6. D D / E E (Programme Up/Down) Switches the set on from standby or off to standby. Selects a programme or a menu item. Switches the set on from standby. 2. Remote Control Sensor F F / G G (Volume Up/Down) 3. INPUT or TV/AV Button Adjus
ページ8に含まれる内容の要旨
Introduction - Shown is a simplified representation of the set. - What is shown here may be somewhat different from your set. - This manual explains the features available on the 42PX4R series. A AV V5 5 S-VIDEO 9 V VIID DE EO O A AU UD DIIO O AC INPUT A AV V1 1 L R Antenna HDMI/ A AU UD DIIO O C CO OM MP PO ON NE EN NT T AUDIO INPUT RGB INPUT DVI(VIDEO) L R A AV V2 2 V VA AR RIIA AB BL LE E A AU UD DIIO O O OU UT T REMOTE RS-232C INPUT CONTROL (CONTROL/SERVICE) A AV
ページ9に含まれる内容の要旨
Installation External Equipment Viewing Setups External Equipment Viewing Setups C CO OM MP PO ON NE EN NT T A AU UD DIIO O L L R R L L ( (M MO ON NO O) ) R R S S- -V VIID DE EO O V VIID DE EO O A AU UD DIIO O A AV V1 1 Antenna HDMI RGB INPUT A AV V4 4 A AU UD DIIO O AUDIO INPUT L L R R A AV V2 2 V VA AR RIIA AB BL LE E A AU UD DIIO O O OU UT T REMOTE RS-232C INPUT CONTROL (CONTROL/SERVICE) A AV V3 3 A AV V1 1 Connection to PC Connection to AV equipment Owner’s Manual 9
ページ10に含まれる内容の要旨
Installation Displayable Monitor Specification Displayable Monitor Specification RGB / HDMI mode RGB / HDMI mode Horizontal Vertical Horizontal Vertical Resolution Resolution Frequency(KHz) Frequency(Hz) Frequency(KHz) Frequency(Hz) 31.468 70.09 31.468 70.09 640x350 640x350 37.861 85.08 37.861 85.08 31.469 70.08 31.469 70.08 720x400 720x400 37.927 85.03 37.927 85.03 31.469 59.94 31.469 59.94 35.000 66.66 35.000 66.66 640x480 37.861 72.80 640x480 37.861 72.80 37.500 75.00 37.500 75.00 43.269 85.0
ページ11に含まれる内容の要旨
Installation TM - HDMI , the HDMI logo and High-Definition Multimedia Interface (the other mode is set to Plug and Play automatically by the set.) are trademarks or registered trademarks of HDMI Licensing. - Then, make the corresponding audio connections. If using a - This set can receive the High-Definition Multimedia Interface sound card, adjust the PC sound as required. (HDMI) or Input of Digital Visual Interface(DVI). - In this case, Audio use other cable. When PC (or sound card - This set s
ページ12に含まれる内容の要旨
42 50 40 MUTE P IP PR - EXIT VCR STB I/II ZOOM + LI ST + PIP PR Installation Accessories Accessories INPUT MULTIMEDIA POWER DVD MODE CABLE MUTE POWER TV/AV MULTIMEDIA I/II ARC LIST ARC MENU OK PR OK VOL VOL PR VOL SSM PSM PR 1 2 3 4 5 6 or 7 8 9 PSM 0 SSM FAVOURITE Q.VIEW PIP/DW SLEEP SIZE POSITION INDEX HOLD REVEAL PIP PR+ TEXT/ TIME REVEAL MIX MODE ? ? M WIN. SIZE PIP PR- MIX POSITION SWAP TIME HOLD PIP INPUT INDEX i Remote Control handset Owner’s Manual 2-Eye Bolts 1.5V Power Cord Alkaline
ページ13に含まれる内容の要旨
Installation Installation Options Installation Options • The set can be installed in different ways such as on a wall, or on a desktop etc. • Install this set only in a location where adequate ventilation is available. Wall Mount: Horizontal Installation Desktop Pedestal Installation • The set can be installed on a wall as shown above. • The set can be mounted on a desk as shown above. (For further information, refer to the optional ‘Wall Mounting Bracket Installation and Setup Guide’.) To Mount
ページ14に含まれる内容の要旨
Operation Turning on the Set Turning on the Set - When using the remote control, aim it at its sensor on the set. Turning on the set just after installation 1. Connect power cord correctly, the set is switched to standby mode. 2. Press the r r / I, INPUT or TV/AV or PR button on the set or press the POWER, INPUT or TV/AV, MULTIMEDIA, D D / E E PR D D E E or NUMBER buttons on the remote control and then the set will switch on. / Turning on the set (power cord is still connected) If the set was
ページ15に含まれる内容の要旨
Operation On screen menus On screen menus - The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the operating steps are also displayed. Menu selection 1. Press the MENU button and then D D / E E button to display each menu. 2. Press the G G button and then the F F / G G button to select a menu item. 3. Repeatedly press the MENU button to return to normal TV viewing. STATION Auto programme Auto programme G G System BG STATION PSM CSM G G M
ページ16に含まれる内容の要旨
Operation Channel Menu Options Channel Menu Options 3. Press the G G button to select Storage. Select the desired pro- Auto Programme Tuning F F G G gramme number with the / button or NUMBER buttons on - All stations that can be received are stored by this method. It the Storage menu. is recommended that you use auto programme during instal- 4. Press the button to select System. Select a TV system with E E lation of this set. the F F / G G button; L : SECAM L/L’ (option) 1. Press the MENU but
ページ17に含まれる内容の要旨
Operation Channel Menu Options Channel Menu Options Assigning a Station Name Moving a programme 1. Select a programme to be moved with the or F F / G G button. D D / E E 1. Repeat the ‘Manual programme tuning’ steps 1 to 2. 2. Press the YELLOW button. 2. Press the G G button and then D D / E E button to select Name. 3. Move the programme to the desired programme number with G G 3. Press the button to display the Name menu. the D D E E or F F / G G button. / STATION Auto programme Storage
ページ18に含まれる内容の要旨
Operation Picture Menu Options Picture Menu Options PSM (Picture Status Memory) Manual Colour Temperature Control - This function adjusts the set to the best picture appearance. - You can adjust red, green, or blue to any colour temperature - When adjusting picture options (contrast, brightness, colour, you prefer. sharpness and tint (NTSC AV only)) manually, PSM is auto- matically changed to User. - You can enjoy the vivid and hi-definition picture with LG’s 1. Press the PSM button. Excellent D
ページ19に含まれる内容の要旨
Operation Sound Menu Options Sound Menu Options • DUAL I + II sends a separate language to each loudspeaker. TV Speaker - You can adjust internal speaker status. NICAM Reception (option) - In COMPONENT, RGB[PC] and HDMI[PC] mode, TV speak- - If your Plasma Display is equipped with the PDP Tuner for er/variable audio can be output even though there is no video NICAM reception, the high quality NICAM (Near signal. Instantaneous Companding Audio Multiplex) digital sound - If you want to use your ex
ページ20に含まれる内容の要旨
Operation Special Menu Options Special Menu Options Child Lock • White Wash : White Wash removes permanent images from the screen. - The set can be set up so that it can only be used with the Note: An excessive permanent image may be impossible to remote control. clear entirely with White Wash. - This set programmed to remember which option it was last • Orbiter : set to even if you turn the set off. Orbiter may help prevent ghost images. However, it is best - In Child lock ‘On’, if the set i
