L4200A User's Guide Benutzerhandbuch Manuel d’utilisation Manuale d'istruzioni Guía del usuario Guia do usuário Gebruikshandleiding Felhasználói útmutató Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. http://www.lge.com See the label attached on the back cover and quote this information to your dealer when you require service. P/NO. : 3828TUL227B(0407-REV03) Printed in Korea Color Monitor
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Table of Contents Safety Precautions A1 Installation Accessories A4 and Using the Remote Control A5 Connection Connecting the Speakers - Optional A8 Name and Function of the Parts A9 Connecting the Monitor A10 Connecting the VCR/DVD A13 Connecting the DVD/HDTV A15 Connecting AV Outputs A16 Selecting and Adjustment the Screen A17 Input Name of the Buttons in the Screen Adjustment Unit A17 OSD Menu A19 Selection How to adjust the OSD (On Screen Display) screen A20 and Tracking When Connected to yo
ページ4に含まれる内容の要旨
Safety Precautions Please read these safety precautions carefully before using the monitor. If you ignore the warning message, you may be seriously injured or there is a possibility of Warning accident or death. Caution If you ignore the caution message, you may be slightly injured or the product may be damaged Precautions in installing the Monitor Warning Keep away from heat sources like electrical heaters. - Electrical shock, fire, malfunction or deformation may occur. Keep the packing anti-mo
ページ5に含まれる内容の要旨
Electrical Power Related Precautions Warning Make sure to connect the power cable to the grounded current. - You may be electrocuted or injured. Use the rated voltage only. - The monitor can be damaged, or you may be electrocuted. During a thunder or lightning storm, unplug the power cable or signal cable. - You may be electrocuted or a fire can break out. Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet. Use a power bar with a grounding term
ページ6に含まれる内容の要旨
Safety Precautions Caution Do not shock the monitor when moving it. - You may be electrocuted or the monitor can be damaged Do not dispose the product-packing box. Use it when you move. Make the panel face forward and hold it with both hands to move. - If you drop the monitor, the damaged monitor can cause electric shock or fire. Contact with the service center for repair. Precautions in Using the Monitor Warning Do not disassemble, repair or modify the monitor at your own discretion. - Fire or
ページ7に含まれる内容の要旨
Accessories Please check the accessories in the product package. * The monitor and the accessories can be different from the figures shown here. Free Mount Type Desktop Stand Type OR Monitor Remote Controller/ Batteries (AAA x 2) Diskette/User's 15-pin D-Sub Signal DVI-D Signal Cable Guide/Cards Cable Power Cord Audio Cable (PC) Optional Wall-mount Rack Speaker kit / Screws Please refer to the enclosed "Installation Guide" when (Applicable only for models installing the wall-mount rack. that sup
ページ8に含まれる内容の要旨
Using the Remote Control Name of the Remote Controller Buttons Power On/Off Button Mute button Sleep Button When watching AV/DVD/HDTV • Input Select Button - The monitor will be automatically turned • AV Button off after a certain period of time. (See next page) Press this button repetitively to select an BRT.W appropriate time duration • Menu Button PSM Button • Exit Button When watching AV/DVD/HDTV - Automatically adjusts the image. Press this button repetitively to set the intended screen. (
ページ9に含まれる内容の要旨
• Input Select Button • AV Button If you press the button once, BRT.W This button will be enabled only the following Input Signal Window will appear. Select when you selected the AV signal. The signal type will be changed the signal type you want with the following order. Set the using the button. signal type you want. DVI DIGITAL [Case 1] DSUB ANALOG CVBS S-Video SCART1 SCART 2 VIDEO1(CVBS) VIDEO2(S-Video) [Case 2] SCART 1 SCART 2 CVBS S-Video COMPONENT1
ページ10に含まれる内容の要旨
Using the Remote Control 3. Swap Button You can swap the main screen and the sub-screen when the PIP/POP/PBP function is used. PIP SWAP POP SWAP PBP When 'Input Signal 1' comes on in the main screen, only 'Input Signal 2' can be displayed on the sub-screen. On the contrary, if the main screen displays 'Input Signal 2', the sub-screen can display 'Input Signal 1' only. You can swap 'Input Signal 1' and 'Input Signal 2' using the SWAP button.
Inserting batte
ページ11に含まれる内容の要旨
Connecting the Speakers - Optional * Applicable only for models that support the speakers Use the screws to secure the speakers on the rear side of the monitor as shown in the below figure. When the speaker is installed. A8 ENGLISH
ページ12に含まれる内容の要旨
Name and Function of the Parts Rear View Back Cap - Open the back cap before you install the monitor. OUT IN Video [Case 1] Video [Case 2] RS-232C Serial ports PC signal inputs Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Input ports Connect the power cord *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card h
ページ13に含まれる内容の要旨
Connecting the Monitor To arrange cables in order 1. Disassemble the stand cover. The cover may be easily disassembled by pressing down on the base as shown in the figure. Stand cover 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will hear the latch click into place. A10 ENGLISH
ページ14に含まれる内容の要旨
Connecting the Monitor First of all, see if the computer, monitor and the peripherals are turned off. Then, connect the signal input cable. When connecting with the DVI signal input cable. A When connecting with the DSub signal input cable. (IBM compatible PC) B When connecting with the DSub signal input cable. (Macintosh) C Rear side of the monitor. OUT IN OUT IN A PC B PC C MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adaptor is available in th
ページ15に含まれる内容の要旨
Turn on power by pressing the power button on the monitor. If the system is not A powered up, check if the main power switch is in the 'on' position. Main Power Switch Power button Turn on the PC. B Select an input signal. Press the Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the monitor. DVI DIGITAL DVI DIGITAL When connecting with a DVI-D signal input cable. A DSUB ANALOG DSUB ANALOG • Select DVI DIGITAL: DVI-D di
ページ16に含まれる内容の要旨
Connecting the VCR/DVD Connect the video cable as shown in the below figure and then connect the power cord (See page A11). When connecting with an RCA cable. A • Connect the input terminal with a proper color match. (Video – Yellow, Sound (left) – White, Sound (right) – Red) OUT IN Video Monitor VCR/DVD When connecting with an S-Video cable. B • Connect to the S-Video input terminal to watch high image quality movies. Monitor Video VCR/DVD A13 S-Video Cable (not included) Yellow Y W White W Whi
ページ17に含まれる内容の要旨
When connecting with a SCART cable. C Monitor Video AUDIO G L VCR/DVD DR Select an input signal. Press the Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the monitor. When connecting with an RCA cable. A • Select VIDEO 1 (CVBS) DVI DIGITAL When connecting with an S-Video cable. DSUB ANALOG B VIDEO1(CVBS) VIDEO2(S-Video) • Select VIDEO 2 (S-Video) SCART 1 SCART 2 When connecting with a SCART cable. C • Select SCART 1 / SCA
ページ18に含まれる内容の要旨
Connecting the DVD/HDTV Connect the video/audio cable as shown in the below figure and then, connect the power cord (See page A11). • Connect the input terminal with a proper color match. • Select the terminal that can be connected most easily among COMP-1 and COMP-2. Video Monitor DVD HDTV Receiver Select an input signal. Press the Input Select button on the remote controller to select the input signal. Or, press the SOURCE button at the front side of the monitor. DVI DIGITAL DSUB ANALOG VIDEO
ページ19に含まれる内容の要旨
Connecting AV Outputs Connect to the external device if you record the broadcasting. When you set the input signal of the main screen as 'VIDEO1 (CVBS)', you can transmit the signal that you're watching to the AV output terminal. Monitor Video VCR/DVD A16 Y Yellow W White Red R RCA Cable (not included) ENGLISH
ページ20に含まれる内容の要旨
Selecting and Adjusting the Screen Name of the Buttons in the Screen Adjustment Unit Power Button • Press the button to turn on the power. Press the button again to turn it off. • This Indicator lights up green when the display operates normally. If Power LED the display is in DPM (Energy Saving) mode, this indicator color changes to amber. MENU Button • Use this button to show/hide the OSD (On Screen Display) menu screen. • Use the button to select an icon or adjust the setting in the OSD sc
