ページ1に含まれる内容の要旨
LC2000
20" LCD Display
USERMANUAL
ページ2に含まれる内容の要旨
Preface About this Manual This manual is designed to assist you in setting up and using your LCD display. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means,
ページ3に含まれる内容の要旨
Important Safety Instructions Read the following instructions carefully. Follow all instructions and heed all warnings to prevent per- sonal injury or damage to the product. Keep these instructions in a safe place for future reference. To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Do not place your LCD display near water. Exposing the apparatus to rain, water, moisture or sun- light can severely damage it. Clean only with a dry cloth. Do n
ページ4に含まれる内容の要旨
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. . CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVIC- ING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrow head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to
ページ5に含まれる内容の要旨
Table of Contents Preface .................................................................................................................i Introduction Unpacking .......................................................................................................1 Getting to Know Your LCD Display Views ..............................................................................................................2 Cables and Connectors ..........................................................
ページ6に含まれる内容の要旨
Table of Contents Adjusting Geometric Settings ................................................................. 18 Adjusting Volume ......................................................................................... 18 Miscellaneous Settings .................................................................................. 19 Setting the OSD Timer ............................................................................ 19 Setting the OSD Language ......................................
ページ7に含まれる内容の要旨
Introduction 1 Introduction Congratulations on your purchase of the 20-inch LCD display. Your LCD display is designed to be versatile, ergonomic, and easy to use. The display is capable of displaying most standard video signals, with VGA resolution supported up to 1024x768 with a native resolution of 640x480. A convenient control panel located on the top of the front panel and a handy remote control allow you to easily adjust display parameters, change chan- nels, and adjust the volume. The
ページ8に含まれる内容の要旨
Getting to Know Your LCD Display 2 Getting to Know Your LCD Display The LCD display is designed to provide easy access to all controls and connections. The following figures identify the LCD display’s components, controls, and ports. 2.1 Views Please refer to Quick Start Guide. (Front View, Side View and Rear View) 2.2 Cables and Connectors The LCD display is equipped with the following types of connectors that are used to connect to external devices including VCRs, DVD players, camcord- ers
ページ9に含まれる内容の要旨
Getting to Know Your LCD Display The LCD display comes with the following cables: 15-pin D-sub VGA cable RCA video cable (Optional) RCA stereo audio cable for AV & S-Video (Optional) 3.5 mm stereo audio cable AC power cord 2.3 Control Panel Keys The control panel keys located at the top of the LCD display can be used to adjust all available settings. The remote control keys (see “Remote Control (Optional)” on page 4) have the same functionality. Display Mode AV Key TV VGA S-Video OSD YPbPr 1
ページ10に含まれる内容の要旨
Getting to Know Your LCD Display 2.4 Remote Control (Optional) 1 10 2 11 3 12 13 4 14 5 6 7 15 16 8 9 4 ENGLISH
ページ11に含まれる内容の要旨
Getting to Know Your LCD Display 2.4.1 Remote Control Key Index Key Description 1 Mute Turns the volume off completely. Multi-channel Television Sound for full stereo 2 MTS Selector and bilingual broadcasts. Automatically turns off the LCD display after a 3 Sleep preset period of time (30, 60, or 90 minutes). Exchanges the Main and PIP video screens 4Video (PIP appears on Main, Main appears in PIP). Exchanges the Main and PIP audio 5 Audio (listen to either the Main or PIP sources). Pictu
ページ12に含まれる内容の要旨
Getting to Know Your LCD Display Note: Using the remote control in direct sunlight reduces the functional distance at which it can be used. Aim the remote control at the IR receiver on the LCD display and ensure there are no object in the line of sight. 2.4.2 Replacing the Remote Control Battery Refer to the following illustration for instructions on replacing the remote control battery (CR2025 3V). 1 Slide the battery tray out (A). 2 Place the battery into the tray with the positive
ページ13に含まれる内容の要旨
Getting to Know Your LCD Display 2.5 Adjusting the Viewing Angle 4 7 When used on a desktop or other flat surface, you can tilt the LCD display back to achieve a more comfortable view- ing angle. You can adjust the LCD display viewing angle from an upright position to a back-tilted angle of up to 7 degrees and a forward-tilted angle of 4 degrees. Warning: Forcing the LCD display past its maximum extension point will damage the unit. When tilting the screen, hold the base firmly and adjust
ページ14に含まれる内容の要旨
Getting to Know Your LCD Display 2.7 Built-in Speakers The LCD display comes with a pair of built-in stereo speakers located at the front of the unit. 2.8 Connecting the AC Power Adapter You must use the 100-240 VAC/60W power adapter that is included with the LCD display. Caution: Make sure you have read and understood the safety notes before connecting the LCD display to the power adapter and electrical outlet. Do not use any other AC power adapter except the adapter that was included
ページ15に含まれる内容の要旨
Adjusting Settings 3 Adjusting Settings This chapter explains the LCD display’s On-Screen Display (OSD) menus. These are used to adjust settings related to picture and audio quality, as well as other features. Using the OSD you can adjust the contrast, brightness, OSD position, color temperature, stereo speaker volume, and other settings. The OSD Menus can be accessed using either the remote control or the display control panel located on the top of the LCD display. 3.1 Controlling the OS
ページ16に含まれる内容の要旨
Adjusting Settings 3.2 Setting the Main Display Mode You can switch between input sources and display them on the main screen in sequence by repeatedly pressing either: the MAIN key on the remote control the SOURCE key on the LCD control panel The Main display mode rotates between: TV AV 1 : TV 2 : OFF VGA YPbPr S-Video YPbPr Main display mode indicator VGA The OSD menus for each display mode allow you to set options that are spe- cific to the selected video signal format
ページ17に含まれる内容の要旨
Adjusting Settings Main PIP Select the PIP source by pressing the PIP key on the remote control. There is no equivalent key on the LCD control panel. Sub signal options vary according to the selected Main signal as shown in the following table. PIP (Picture-in-Picture) Main OFF TV AV S-Video YPbPr VGA √− − − √ √ TV √− − − √ √ AV √− − − √ √ S-Video √√ √ √ − − YPbPr √√ √ √ − − VGA 11 ENGLISH
ページ18に含まれる内容の要旨
Adjusting Settings 3.4 Adjusting the Display The following table indicates the display settings that are available for each Main display mode. Setting TV AV S-Video YPbPr VGA Contrast √√ √ √ √ Brightness √√ √ √ √ Color √√ √ √ − Hue √√ √ √ − Sharpness √√ √ √ − Focus −− − √ − Auto −− − − √ Color-Temp −− − − √ Red −− − − √ Green −− − − √ Blue −− − − √ White Balance −− − − √ NOTE: To return all DISPLAY settings to their factory defaults, select “Recall” from the menu and press the key. Contrast:
ページ19に含まれる内容の要旨
Adjusting Settings 3.5 Television Settings (Optional) 3.5.1 Setting Channels When connected to a television antenna or CATV cable, the LCD display can automatically scan for available channels. Before TV CH SCAN scanning, make sure you have CCD OFF selected the correct TV V-CHIP signal source: air (broadcast) CATV / AIR CATV CH ADD/DEL [–] or CATV (cable TV). To scan for channels: 1 Press MENU to turn the OSD on. 2 Press VOL+ to switch to the TV menu. 3 Press PRG/CH to select CH-Scan. 4 P
ページ20に含まれる内容の要旨
Adjusting Settings 3.5.2 Using Quick Channels The quick channel function lets you assign ten channels that can be accessed by the quick channel keys on the Quick remote control. Channel Block Press PRG/CH / in the QUICK CH block on the remote control to switch between assigned quick channels. Assigning Quick Channels 1 First choose a channel you want to add to the quick channels by using the normal PRG/CH / keys or by entering a channel number directly with the number keys on the
