ページ1に含まれる内容の要旨
OWNER'S MANUAL
51CM CORDLESS REMOTE LCD TV/MONITOR
MODEL: TFTV-510
Type Tested
Electrical
Safety
AS/NZ 3250
Standards Australia
PALSONIC CORPORATION PTY LTD
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL: (02) 9313 7111
FAX: (02) 9313 7555
www.palsonic.com.au
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA: 1300 657 888
ページ2に含まれる内容の要旨
Congratulations on your purchase of this Palsonic LCD TV/MONITOR. We recommend that your thoroughly read this manual before use to fully enjoy the many functions and excellent effects of this LCD TV/MONITOR. Retain this manual in an easily accessible location for future reference. Note: Screen displays and illustrations in this manual may differ from the actual ones for better visibility. Contents Features .................................................... 1 Channel Select ....................
ページ3に含まれる内容の要旨
Features Features TV/Monitor High brightness/High contrast LCD Resolution: 640 x 480 @ 60Hz 2 Brightness: 450 cd/m Contrast Ratio: 350:1 Multi digital processing & Picture improvement circuit English/Chinese on-screen menu display Sleep Timer Backlight Adjustment Channel Edit Low power consumption/Low voltage PC audio input VGA input AV input S-VIDEO input Earphone jack 1
ページ4に含まれる内容の要旨
Cautions for safety Cautions for safety When any unusual situation occurs, turn off the power supply at once and remove the plug from the wall outlet. Contact a qualified service department in your local area. Do not expose this unit in the rain or spatter by liquid, Do not use this product near water- for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. Do not use immediately after moving from a low temperature to high te
ページ5に含まれる内容の要旨
Cautions for safety (continued) Cautions for safety Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 1. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. 2. Use only a trolley, stand, tripod, and bracket or table recommended by the manufacturer
ページ6に含まれる内容の要旨
This TV set can operate on a power of ~240V, 50Hz. You must not use any other type of power supply. Do not overload wall outlets, extension cords, or convenience receptacles on other equipment as this can result in a risk of fire or electric shock. High Voltage exists in this TV set. Do not remove the cover. In case the product needs replacement parts, make sure that the service person uses replacement parts specified by the manufacturer, or those with the same characteristics and performance as
ページ7に含まれる内容の要旨
Identification of controls Front/Back Front 6 7 2 5 1 3 4 1. To input signal select 2. To access menu 3. CH+/-: to select a higher/lower numbered channel or cycle through the menus. 4. VOL+/-: press to raise/lower the volume or adjust the selected item. 5. Power on/standby 6. Indicator: standby mode: red power on: yellow 7. Remote sensor 5
ページ8に含まれる内容の要旨
Back AUDIO IN PHONE SPEAK OUT TUNER POWER IN Antenna input AC Power input S-VIDEO input Earphone jack VGA input PC audio line in Speaker output Video/audio input 6
ページ9に含まれる内容の要旨
Remote control Remote control Power on/standby Muting Sound Channel select In PC mode, auto correct picture Press the button to switch the set among TV/AC/S-VIDEO/PC Clock/Timer setting Previous channel Press to adjust picture To enter into menu (including brightness, On-screen display contrast, saturation and sharpness). Channel up/down selector. In menu operations, used to select Volume up/down selector. item upwards or downwards. In menu operation adjust the selected item or access the sun-me
ページ10に含まれる内容の要旨
30 Battery Installation Please install the batteries before using the remote control. Install two "AA" Replace the battery Open the battery cover. batteries matching cover. the +/- polarities of the battery to the +/- marks. Effective remote range Notes: 1. When the remote control will not be used for a long period of time or when the batteries are worn out, remove the batteries. 2. Do not drop, dampen the remote control. 3. Do not disassemble the remote control. 4. There should be no ob
ページ11に含まれる内容の要旨
Installation Antenna connection/Power connection/Elevation adjustment Antenna connection Optimum reception of colour requires a good signal and will generally mean that an outdoor aerial must be used. The exact type and position of the aerial will depend upon your particular area. Tuner Notes: Turn off the power firstly when you connect an outdoor antenna to the antenna input terminal. When installing an outside antenna system, extreme care should be taken to keep from touching power lines or
ページ12に含まれる内容の要旨
Power Connection To the wall outlet Power cord POWER IN Notes: 1. This TV can only be operated on a power of AC 240V 50 Hz. 2. Please remove the power plug from the wall outlet when the TV will not be used for a long period of time. Elevation adjustment You can adjust the angle of the LCD TV as follows. 0 0 The elevation can be adjusted from -5 to +15 . 0 15 0 -5 10
ページ13に含まれる内容の要旨
Installation (continued) Connecting video/audio equipment Connecting video/audio equipment Composite VIDEO Signal Connection (RCA) Connect the composite signal terminal on the TV to the output of AV equipment through composite cable as illustrated. If you select the video signal, please set the input signal source to AV mode (please refer to page 13). To video input To video output Y Y VCR, DVD etc. w w R R To audio outputs To audio inputs Y Yellow (video) W White (audio, L) R Red (audio, R) AUD
ページ14に含まれる内容の要旨
1. Carefully check the terminals for position and type before making any connections. 2. Loose connectors can result in image or colour problems. Make sure that all connectors are securely inserted into their terminals. 3. When connecting an external device, turn off the power of the main unit first to prevent any possible damage. To S-VIDEO input To S-VIDEO output VCR, DVD etc. w w R R To audio inputs To audio outputs W White (audio, L) R Red (audio, R) AUDIO IN PHONE S
ページ15に含まれる内容の要旨
Basic operations Turning On/Turning Off/Selecting input signal/Menu introduction Turning On 1 Insert the power plug to wall outlet, then the red indicator lights up and the unit is in STANDBY mode. 2 Press the POWER button on the unit's control panel or the button on the remote control to turn on (the indicator turns to yellow). 3 The TV will display the program before turning off last time. SOURCE CH- VOL- POWER MENU CH+ VOL+ Turning Off Press the POWER on the unit or the button on the re
ページ16に含まれる内容の要旨
Menu introduction In TV mode, there are three menu pages. In MENU operations, the CH+/- buttons are used to select item (selected item will turn to white), the VOL+/- buttons are used to adjust or confirm selected item. But in PC mode, only one menu can be accessed. During MENU operation process, pressing MENU button repeatedly or waiting for 5 seconds can exit menu. 50 Bright To adjust picture's brightness. Press MENU To adjust picture's contrast. Contrast 100 button To adjust picture's colour
ページ17に含まれる内容の要旨
Operations in TV mode Channel preset Auto search/Channel search/Fine tuning/Skip setting Auto search 1 Press MENU button third times to Auto search access menu (Refer to Menu Fine tuning introduction on page 14). Channel search Skip setting SOURCE MENU CH VOL POWER Channel edit 2 Press CH+/- to select Auto search item. CH- VOL- 3 Press VOL+/- buttons to start Auto CH+ VOL+ MENU search and all active programs will be memorised. During the process of Auto Search, Channel searching ...VHFH 5 pressi
ページ18に含まれる内容の要旨
To conduct the following operation, you must select TV input signal (Refer to Selecting input signal on page 13). Fine tuning 1 Press DIGIT buttons or CH+/- Auto search Fine tuning buttons to select the desired Channel search channel. Skip setting Channel edit SOURCE MENU CH VOL POWER 2 Press MENU button third times to access menu. (refer to Menu CH- VOL- introduction on page 14). MENU CH+ VOL+ 3 Press CH+/- to select Fine tuning item. Press VOL+/- to access the sub-menu. Then press VOL+/- to Fi
ページ19に含まれる内容の要旨
Operations in TV mode (continued) Channel preset Channel edit Channel Edit After Auto Channel Preset, this function is for you to edit the order of programs conveniently according to your favourite. Use DIGIT buttons or CH+/- 1 Auto search SOURCE MENU CH VOL POWER Fine tuning buttons to select current Channel search channel number. Skip setting CH- Channel edit VOL- MENU CH+ VOL+ 2 Press MENU button third times to access menu (refer to Menu introduction on page 14). 3 Press CH+/- buttons to sele
ページ20に含まれる内容の要旨
Channel Select Using DIGIT buttons/Using CH+/- buttons/Using previous channel button Using DIGIT buttons 1 To select one-digit channel number: Press 0-9 digit buttons to select the desired channel. Two seconds later, the channel is selected. SOURCE MENU CH VOL POWER To select two-digit channel number: 2 CH- Press -/-- button repeatedly to display -- on the screen. CH+ Press 1-9 buttons to select tens digit. Press 0-9 buttons to select ones digit (The period of the two presses must be within 2 se
