ページ1に含まれる内容の要旨
OWNER'S MANUAL
66CM WIDE SCREEN LCD TV / MONITOR
MODEL: TFTV663R
N111
PALSONIC
1 JOYNTON AVENUE
WATERLOO NSW 2017 AUSTRALIA
TEL:(02)9313 7111
FAX:(02)9313 7555
PALSONIC CUSTOMER SERVICE
TELEPHONE
AUSTRALIA:1300 657 888
ページ2に含まれる内容の要旨
Contents Contents Important Information 3 Important Safety Precautions 4 Important Notice 6 Identification of Controls 7 Preparations 9 Making Connections
ページ3に含まれる内容の要旨
Important Information IMPORTANT INFORMATION If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: ! Using cabinets or stands recommended by the manufacturer of the television. ! Only using furniture that can safely support the television. ! Ensuring the television is not overhanging the edge of the supporting furniture. ! Not placing the
ページ4に含まれる内容の要旨
Important Safety Precautions Electrical energy can perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the
ページ5に含まれる内容の要旨
Important Safety Precautions (Continued) 15. Stand---Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. Do not place the product on an unstable trolley, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting
ページ6に含まれる内容の要旨
Important Notice Do not use in hot and cold rooms (locations) About Temperature ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ! Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the screen to ma
ページ7に含まれる内容の要旨
Identification of Controls Main Unit (Front View/Side View) 1. Remote sensor Receives signals from the remote control. Do not block. 2. Power indicator Lights blue when in operating mode. Lights red when in standby mode. 1 2 3. Power Switch 4. CH+/- Press these two buttons to directly change the TV channel; In menu operations, these buttons serve as up/down buttons. 5. VOL+/– Press the VOL+ or VOL– button to directly increase or decrease the sound volume level;
ページ8に含まれる内容の要旨
Identification of Controls (Continued) Remote Control 1. POWER : Switches the TV power on or Standby. 2. FREEZE: To freeze current picture. 3. FAV.LIST: Displays the favourite channel list. 1 15 4. S.MODE: Selects sound mode. 16 5. 0 – 9 number buttons: Press to enter channel numbers or input 2 17 password. 3 18 4 6. ASPECT: Selects the screen aspect ratio. 7. MENU: Displays the main menu screen. 8.5 /6 /3 /4 /OK: Press the arrows to navigate through the menus or adjust an item. Press
ページ9に含まれる内容の要旨
Preparations Installing and removing the stand If the stand is provided, please read these instructions thoroughly before attempting this installation. You must install your TV into the stand in order for it to stand upright on a cabinet or other flat surface. If you intend to mount your TV on a wall or other vertical surface, you must remove the stand column. Cautions: Make sure that you handle your TV very carefully when attempting assembly or removal of the stand. If you are not sure of
ページ10に含まれる内容の要旨
30 Preparations (Continued) Using the Remote Control Selecting a location You should select a location for the TV: · Where direct light does not reflect on the screen. · That has indirect and soft lighting. · Where the TV has access to an antenna or cable TV connection. · Where the TV has access to a power outlet. Note: Watching TV in total darkness or with a reflection on the screen may cause eyestrain. Installing remote control Batteries 1 Open the battery cover. Insert two AAA batte
ページ11に含まれる内容の要旨
Making Connections Before you make any connections Cautions Before Connecting = When connecting an external device to the TV, make sure that the TV and the device are turned off. = Check the plugs on the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the TV. = Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. = The illustration of the external device may be different
ページ12に含まれる内容の要旨
Making Connections (Continued) Headphone connection To connect headphones: Insert the plug of the headphone into the TV’s Headphone jack. TV Side When using headphones, adjust the headphone volume so as to avoid excessive levels, as hearing damage may result. Headphones USB connection Insert your USB device into the USB port. TV Side To USB port To play from the USB device: 1. Turn on your TV, then press SOURCE button. The Input Source menu opens. 2. Press 5 or6 to select USB, then press
ページ13に含まれる内容の要旨
Making Connections (Continued) HDMI device connection How to connect an HDMI device: Connect the HDMI cable between the HDMI jack on the TV (HDMI1 and HDMI2 located at TV rear, while HDMI3 at TV side) and HDMI output jack on the device. TV REAR Note: If your device has an HDMI connection, we recommend you use that to get the best quality possible. To play from the HDMI device: 1. Turn on your TV, then press SOURCE button. The Input Source menu opens. 2. Press 5 or6 to select HDMI1 or HDM
ページ14に含まれる内容の要旨
Making Connections (Continued) VCR connection (for playback) To connect a VCR: Connect the Audio/Video cables between the Audio (L/R)/Video jacks on the TV and VCR. TV REAR Cables are often color- coded to connectors. Connect yellow to AV cable yellow, red to red, white to white. To play the VCR: 1. Turn on your TV, then press SOURCE button. The Input Source menu opens. VIDEO L AUDIO R 2. Press 5 or6 to select AV1, then press OK to confirm. 3. Turn on your VCR , insert a videotape and pre
ページ15に含まれる内容の要旨
First Time Configuration/Basic Operations Initial setup The first time you use the TV, you need to configure your TV. To configure your TV: Make sure that you have inserted the batteries in the remote control, have connected your antenna to the TV 1 properly, and have connected the AC power. 2 Press the Power Switch on the TV, then press POWER to Installation Guide turn on the TV. OSD Language English Channel Tuning 3 Now the Installation Guide screen appears with Channel OK Start E
ページ16に含まれる内容の要旨
Basic Operations (Continued) Input Source Selection Input Source DTV To select the input source: ATV 1 Press SOURCE button. The Input Source list appears. AV1 AV2 Component1 Press 6 or 5 to select the input source, then press OK or 4 to confirm your choice. 2 Component2 The TV switches to the selected source. D-SUB HDMI1 HDMI2 HDMI3 USB Move Select Programme Selection Digital programme selection Channel List DTV 2 ABC TV Sydney After you have tuned the TV, you have several ways to select
ページ17に含まれる内容の要旨
Basic Operations (Continued) Volume adjusment To adjust the volume: ! Press the VOL+/ – to increase or decrease the volume. ! Press the MUTE button to temporarily turn off the sound. To restore the sound, press the MUTE button again. Displaying program information Press the INFO button to display the information banner. The information banner displays current status information such as the channel number and signal source. Depending on the mode, different information is displayed. In DTV
ページ18に含まれる内容の要旨
Basic Operations (Continued) On-screen menu overview List of main menus to help you with operations PICTURE menu SOUND menu PICTURE Picture SOUND TIME OPTION LOCK CHANNEL PICTURE Picture SOUND Sound TIME OPTION LOCK CHANNEL Picture Mode User Sound Mode User Contrast Treble 52 75 Bass Brightness 45 50 Colour 50 Balance 0 50 Auto Volume Off Sharpness Surround Sound Off Tint 50 MENU SELECT MOVE MENU RETURN SELECT MOVE RETURN TIME menu OPTION menu PICTURE SOUND TIME OPTION LOCK CHANNEL PICTURE Pi
ページ19に含まれる内容の要旨
Memorizing the Channels Note: If the Lock System is On, Auto Tuning/DTV manual tuning/ATV manual tuning can not be operated without password. For details, please see section. When in PVR recording/time shifting, CHANNEL menu can not be accessed. Auto Tuning Auto Tuning will completely re-tune the TV and can be used to update the channel list. It is recommended that Auto Tuning is run periodically to ensure that all new services are added. All current channe
ページ20に含まれる内容の要旨
Memorizing the Channels & Programme Edit ATV manual tuning - analogue only - Use the Manual Tuning operation if desired channels can not be preset by Auto Tuning or if you would like to preset channels to specific position numbers one by one. In CHANNEL menu, press 6 or5 to select ATV Manual 1 TIME OPTION LOCK CHANNEL PICTURE Picture Picture Picture SOUND Picture Picture Sound Sound Tuning, then press4 or OK to access the setting menu. Picture Picture Auto Tuning DTV Manual Tuning From A
