ページ1に含まれる内容の要旨
Philips Hospitality LCD TV: Pro range
EN 19HFL3330D/10
EN 22HFL3330D/10
Please ask your local sales support for additional information on correct installation/ positioning of the TV
in the room and complementary accessories
DFU-AUG2008
PHILIPS
PB1
ページ2に含まれる内容の要旨
Table of contents 1 INTRODUCTION FOR PBS MODE 2 2 REMOTE CONTROL 3 2.1 Remote control 2573 overview (optional) 3 2.2 Guest Remote control overview 3 3 INITIAL SETUP 5 3.1 Virgin mode – Out of box Setting 5 4 SETUP MENU AND PBS MODE BEHAVIOR 4.1 PBS MODE 6 4.2 APPLICATION 6 4.3 SWITCH ON SETTINGS 7 4.4 CONTROL SETTINGS 7 4.5 BLANK CHANNEL 8 4.6 SMARTLOADER TO TV 8 4.7 TV TO SMARTLOADER 8 4.8 STORE 9 4 PRACTICAL HINTS 9 PB2
ページ3に含まれる内容の要旨
1 INTRODUCTION TO PBS MODE The Professional Business Solutions (PBS) mode defines a specific TV or monitor mode (similar to hotel mode). This mode limits the amount of TV controls (e.g. like volume limitation), that a normal user (i.e. hotel guest) can use. The amount of access can be configured in the setup menu by a super-user (e.g. hotel installer). This manual describes how to setup a television channels using Virgin Mode, configure other TV settings and activate the PBS mode.
ページ4に含まれる内容の要旨
7. OK Accesses the All channels menu or activates a setting. 8. Navigate the menu. 9. SLEEP Display the sleep timer menu and adjust the sleep timer. 10. P +/- Switches to the next or previous channel. 11. NUMBER KEYS Selects a channel, page or setting. 12. Selects a picture format. 13. MHEG CANCEL Cancels digital text or interactive services (UK only). 14. Mutes or restores sound. 15. Increases or decreases volume. 16. MENU/EXIT Toggles the menu on or off. 17. ALARM
ページ5に含まれる内容の要旨
entering direct channel numbers and channel 3 INITIAL SETUP name if needed. 1.1 Virgin mode – Out Of Box Setting and Initial Setup This TV set includes an installation feature that, at initial set-up of the TV, guides you through the installer menu to apply the proper installation settings. This feature, named Virgin Mode, active when the TV set is unpacked and first powered on, is normally used for installation/setting of first TV set. To save time during a complete setup for hos
ページ6に含まれる内容の要旨
4.1 PBS MODE 4 DISPLAY SETUP MENUS The TV can display PBS Setup menu by pressing To activate PBS Mode, select ON. RC2573 MENU key in SETUP mode or by following Guest RC key sequence “319753 ”” key within 10 seconds if high security mode set to Off. 4.2 APPLICATION The Application to select is Hotel/Hospital or Business Monitor; this is based on the installer requirement. The following menu appears. When APPLICATION is Hotel/Hospital, the limited Guest TV menu
ページ7に含まれる内容の要旨
4.3 SWITCH ON SETTINGS • WELCOME MESSAGE – Define welcome message of 2 lines of 20 alphanumeric characters each. The characters used depend on the language selected for consumer operation. • SWITCH ON VOLUME - The TV will always switch on (via mains-switch or standby) to this preset value. The On volume setting cannot exceed the max The letters are entered and navigated through cursor volume. The current volume should follow the on keys and digit keys. volume, and adjusting
ページ8に含まれる内容の要旨
• REMOTE CONTROL LOCKED – Enable or disable 4.6 SMARTLOADER TO TV (using USB) the operation of the normal remotes. However, when the High Security Mode is OFF, to enter PBS Mode Menu, using the “319753 ”” key sequence is not blocked, even when Remote Control Locked is ON. • OSD DISPLAY – Enable or disable OSD display (e.g., channel number or name, sound mode, volume bar, clock, etc.). • HIGH SECURITY MODE – choice between using normal consumer RC or PBS setup RC to display the se
ページ9に含まれる内容の要旨
A 128MB USB Memory Stick with at least 5 HOW TO POSITION YOUR TV 10MB free memory space will be suitable. VIEWING ANGLE is the most convenient angle at Note:During copying process, USB drive should which a display can be viewed with good visual not be removed to prevent any undersigned performance functionality of the TV. Note:After completed, there are 2 files generated in the USB root directory - NVM_MTK_2K8_EU.BIN containing the general setting for example, Video/
ページ10に含まれる内容の要旨
ABC © 2008 Koninklijke Philips Electronics N.V. All rights reserved. 72-E330MD-X411A PB10
ページ11に含まれる内容の要旨
Register your product and get support at www.philips.com/welcome EN USER MANUAL
ページ12に含まれる内容の要旨
5.8 Use subtitles . . . . . . . . . . . . . . . . . . . . 23 Table of contents 5.9 Listen to digital radio channels. . . . . . 23 1 Important � � � � � � � � � � � � � � � � � � � � � � 3 5.10 Update your TV software . . . . . . . . . . 23 1.1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 6 Install channels � � � � � � � � � � � � � � � � � 24 1.2 Screen care . . . . . . . . . . . . . . . . . . . . . . 4 6.1 Automatically install channels . . . . . . . 24 1.3
ページ13に含まれる内容の要旨
2008 © Koninklijke Philips performing source distribution, a 1. Remove fuse cover and fuse. Electronics N.V. All rights reserved. complete machine-readable copy 2. The replacement fuse must Specifications are subject to change of the corresponding source code comply with BS 1362 and have without notice. Trademarks are on a medium customarily used for the ASTA approval mark. If the the property of Koninklijke Philips software interchange. fuse is lost, contact your dealer in Electronics N.
ページ14に含まれる内容の要旨
• Do not insert any strange object into the 1 Important ventilation slot. This might lead to damage of TV. Congratulations on your purchase and • To avoid risk of fire or electric shock, do welcome to Philips! not place the TV, remote control or remote Read this user manual before you start to use control batteries near naked flame sources this product. (e.g. lighted candles) and other heat sources including direct sunlight. Pay close attention to this sectio
ページ15に含まれる内容の要旨
• When disconnecting the TV from the mains, teletext pages, black bars or stock market be sure to: tickers. If you must use stationary images, reduce the screen contrast and brightness • Turn off the TV, then the mains power to avoid screen damage. (if available). • Unplug the mains cord from the mains 1�3 Environmental care socket outlet. Recycling your packaging The packaging of this product is intended to be recycled. Contact your local authorities for inf
ページ16に含まれる内容の要旨
Side connectors 2 Your TV This section gives you an overview of commonly-used TV controls and functions. 2�1 TV overview Side controls and indicators VOLUME 4 3 MENU Use the TV side connectors to connect to mobile devices such as a high-definition camcorder or game console. You can also PROGRAM 2 connect a pair of headphone. 1 POWER Back connectors 5 1. POWER DIGITAL AUDIO OUT 2. PROGRAM +/- EXT 3 3. MENU 4. VOLUME +/- 5. Power indicator/remote control sensor Use the TV ba
ページ17に含まれる内容の要旨
Remote control 1. . Power 2. SOURCE 3. TELETEXT 1 4. Colour keys From left, red, green, yellow, blue 2 3 5. Í, Æ, Î, ï, OK Navigation or cursor keys 4 6. MENU 7. P +/- Program up or down 8. ” +/- 5 Volume up or down For advanced information about the remote control, see Section 5.1 Remote control overview. 6 7 8 EN-6
ページ18に含まれる内容の要旨
32 � Wall mount the TV 3 Get started B WARNING This section helps you position and install the Wall mounting of the TV should only TV and supplements the information provided be performed by qualified installers. in the Quick Start Guide. Koninklijke Philips Electronics NV � � bears no responsibility for improper D Note mounting that results in accident or Refer to the Quick Start Guide for stand injury� mounting instructions. B Step 1 Purchase a VESA-compatible wall bra
ページ19に含まれる内容の要旨
compatible wall bracket documentation for instructions. 1. Locate the four mounting nuts at the back of the TV. 3. Firmly pull the stand from the bottom of the TV. Place both the stand and bolts in a secure location for future reinstallation. 2. Align the plate/bracket to the four mounting nuts, placing the spacers between the plate/bracket and the mounting nuts. 3. Using a spanner, insert the bolts through the plate/bracket and spacers, tightly securing the bolts
ページ20に含まれる内容の要旨
3�3 Connect the antenna cable 1. Locate the TV ANTENNA connector at the back of the TV. 2. Connect the mains cord to the AC IN mains connector. 3. Connect the mains cord to the mains, ensuring that the cord is tightly secured at both ends. 2. Connect one end of an antenna cable (not supplied) to the TV ANTENNA connector. Use an adaptor if the antenna cable does not fit. 3. Connect the other end of the antenna cable to your antenna outlet, ensuring that the cable is tight
